mahogany-users — Forum for discussions of the Mahogany mail and news client.

[M-User] cannot delete identity

[Nerijus B. <ne...@us...>]

Hello,

didn't check the code yet, will report it anyway - Mail->Identity->Delete...
lets me select identity to delete, but after pressing OK nothing happens.

Regards,
Nerijus

Re: [M-User] segmentation fault

[Nerijus B. <ne...@us...>]

On Sat, 21 Sep 2013 02:24:28 +0300 Nerijus Baliunas <ne...@us...> wrote:

NB> I rebooted system and recompiled both wx and M once more, didn't help.
NB> What else can I try or what info should I give/check?

Found an old 1.5 year ago clang-compiled M, gathered missing 32 bit libs and
was able to launch M. After disabling global password support the new M
launches! What a relief! :)

Regards,
Nerijus

Re: [M-User] segmentation fault

[Nerijus B. <ne...@us...>]

2013.09.17 00:31, Nerijus Baliunas rašė:
>>    I also strongly hope that this was just some build mishap which will
>> >magically disappear after a rebuild...
> I rebuilt both trunk wx and M in the empty build dirs.

I rebooted system and recompiled both wx and M once more, didn't help.
What else can I try or what info should I give/check?

Nerijus

Re: [M-User] segmentation fault

[Nerijus B. <ne...@us...>]

2013.09.16 22:12, Vadim Zeitlin rašė:

>   If you have symbols (i.e. the binaries are not stripped), then the stack
> was corrupted. In this case, ideal would be to run it under gdb, break on
> setup_twofish() and step over it to see what's going on.

Breakpoint 1, setup_twofish () at .src/util/strutil.cpp:737
737	   if ( !gs_GlobalPassword.empty() )
(gdb) n
740	      return true;
(gdb) n
802	}
(gdb) n
strutil_encrypt_tf (original=...) at .src/util/strutil.cpp:813
813	      CryptData input(original.utf8_str());
(gdb) n
814	      CryptData output;
(gdb) n
815	      int rc = TwoFishCrypt(1, 128, gs_GlobalPassword.utf8_str(), &input ,&output);
(gdb) bt
#0  strutil_encrypt_tf (original=...) at .src/util/strutil.cpp:815
#1  0x000000000061161d in strutil_encrypt_initialise () at .src/util/strutil.cpp:898
#2  0x0000000000611e63 in strutil_decrypt (original=...) at .src/util/strutil.cpp:1025
#3  0x000000000046256f in MFolderFromProfile::GetPassword (this=0xf193c0)
    at .src/classes/MFolder.cpp:798
#4  0x00000000005fbd5b in MailFolder::GetAuthInfoForFolder (mfolder=0xf193c0, login=..., 
    password=..., parent=0xccf4a0, userEnteredPwd=0x7fffffffb97f)
    at .src/mail/MailFolder.cpp:1430
#5  0x00000000005f7dba in MailFolder::OpenFolder (folder=0xf193c0, 
    mode=MailFolder::Normal, frame=0xccf4a0) at .src/mail/MailFolder.cpp:200
#6  0x000000000052cbd7 in wxFolderView::OpenFolder (this=0xf10410, folder=0xf193c0, 
    readonly=false) at .src/gui/wxFolderView.cpp:4197
#7  0x00000000004d8b4f in wxMainFrame::OpenFolder (this=0xccf4a0, pFolder=0xf193c0, 
    readonly=false) at .src/gui/wxMainFrame.cpp:784
#8  0x00000000004a0217 in MAppBase::ContinueStartup (this=0xc35b70)
    at .src/classes/MApplication.cpp:280
#9  0x00000000004a1cc1 in MAppBase::OnStartup (this=0xc35b70)
    at .src/classes/MApplication.cpp:628
#10 0x00000000004bad6d in wxMApp::OnInit (this=0xc35940) at .src/gui/wxMApp.cpp:1161
#11 0x00000000004c21cb in wxAppConsoleBase::CallOnInit (this=0xc35940)
    at /a/M/wxWindows.30/wxWidgets/include/wx/app.h:93
#12 0x00007ffff6686d11 in wxEntry (argc=@0x7ffff69f4150: 1, argv=0xc33ca0)
    at ../wxWidgets/src/common/init.cpp:479
#13 0x00007ffff6686e08 in wxEntry (argc=@0x7fffffffd78c: 1, argv=0x7fffffffd878)
    at ../wxWidgets/src/common/init.cpp:507
#14 0x00000000004b8f05 in main (argc=1, argv=0x7fffffffd878) at .src/gui/wxMApp.cpp:341
(gdb) n

Program received signal SIGSEGV, Segmentation fault.
0x0000000000628884 in reKey (key=0x7fffffff8f70) at .src/util/twofish2.c:728
728		}

>   I also strongly hope that this was just some build mishap which will
> magically disappear after a rebuild...

I rebuilt both trunk wx and M in the empty build dirs.

Thanks,
Nerijus

Re: [M-User] segmentation fault

[Vadim Z. <vz-...@ze...>]

On Mon, 16 Sep 2013 15:24:31 +0300 Nerijus Baliunas <ne...@us...> wrote:

NB> I am slowly upgrading my distro to 64 bit, so it may be related.
NB> I have global password enabled, but the password window is too small
NB> and there is no text field to enter password (screenshot attached).

 Sorry, I really have no idea about how could this happen... We use just a
plain text input dialog here (which is probably a bad idea, security-wise,
but this is a different subject) and it really should work.

NB> After I press ESC or Enter I get segfault:
NB> 
NB> Program received signal SIGSEGV, Segmentation fault.
NB> 0x0000000000628884 in reKey (key=0x7fffffff9420) at .src/util/twofish2.c:728
NB> 728		}
NB> (gdb) bt
NB> #0  0x0000000000628884 in reKey (key=0x7fffffff9420) at .src/util/twofish2.c:728
NB> #1  0x732f7877cd878697 in ?? ()
NB> #2  0x6772617283949096 in ?? ()
NB> #3  0x00000000e2e28acc in ?? ()
NB> ...
NB> 
NB> Any ideas?

 If you have symbols (i.e. the binaries are not stripped), then the stack
was corrupted. In this case, ideal would be to run it under gdb, break on
setup_twofish() and step over it to see what's going on. If the stack above
is correct, i.e. you just don't have the symbols, then the first thing to
do would be to build a version of the binary with the symbols.

 I also strongly hope that this was just some build mishap which will
magically disappear after a rebuild...

 Good luck,
VZ

Re: [M-User] segmentation fault

[Nerijus B. <ne...@us...>]

(gdb) thread apply all backtrace

Thread 2 (Thread 0x7fffe82a2700 (LWP 14563)):
#0  0x0000003b85eeb76d in poll () from /lib64/libc.so.6
#1  0x0000003b882480f4 in g_main_context_iterate.isra.22 ()
    from /usr/lib64/libglib-2.0.so.0
#2  0x0000003b8824855a in g_main_loop_run () from /usr/lib64/libglib-2.0.so.0
#3  0x0000003b8cec6d66 in gdbus_shared_thread_func () from /usr/lib64/libgio-2.0.so.0
#4  0x0000003b8826c185 in g_thread_proxy () from /usr/lib64/libglib-2.0.so.0
#5  0x0000003b86607c53 in start_thread () from /lib64/libpthread.so.0
#6  0x0000003b85ef5d3d in clone () from /lib64/libc.so.6

Thread 1 (Thread 0x7ffff5e01240 (LWP 14557)):
#0  0x0000000000628884 in reKey (key=0x7fffffff9420) at .src/util/twofish2.c:728
#1  0x732f7877cd878697 in ?? ()
#2  0x6772617283949096 in ?? ()
#3  0x00000000e2e28acc in ?? ()
#4  0x207865648cab8b97 in ?? ()
#5  0x756f436ebd8fc2de in ?? ()

[M-User] segmentation fault

[Nerijus B. <ne...@us...>]

Hello,

I am slowly upgrading my distro to 64 bit, so it may be related.
I have global password enabled, but the password window is too small
and there is no text field to enter password (screenshot attached).
After I press ESC or Enter I get segfault:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000628884 in reKey (key=0x7fffffff9420) at .src/util/twofish2.c:728
728		}
(gdb) bt
#0  0x0000000000628884 in reKey (key=0x7fffffff9420) at .src/util/twofish2.c:728
#1  0x732f7877cd878697 in ?? ()
#2  0x6772617283949096 in ?? ()
#3  0x00000000e2e28acc in ?? ()
...

Any ideas?

Nerijus

Re: [M-User] folders on smb network shares - march snapshot

[Vadim Z. <vz-...@ze...>]

On Tue, 10 Jul 2012 21:06:28 +0200 Rick Moritz <ra...@gm...> wrote:

RM> I just updated to the march snapshot, and have discovered the following
RM> issue:
RM> 
RM> 10.07.2012 21:00:52: Mail log: Can't open mailbox \\SKELETOR\rick\home\RICKNET\rick\AppData\Mahogany\lists\dm-crypt: no such mailbox

 Hello,

 I finally found the time to test it and I indeed see the problem.
Apparently upgrading UW IMAP (c-client) library has broken UNC paths
handling, it prepended the current drive name to them internally and so had
no chance of working :-( I've fixed it now, will test it a bit more and
make another Win32 binary.

RM> I hope someone can help, as I'm somewhat worried about the changes the
RM> latest snapshot did to my configuration, and whether going back to the
RM> old M.exe will safely recover my settings.

 It will refuse to go back but you can force it to by setting the
HKEY_CURRENT_USER\Software\Mahogany-Team\M\Profiles\Version registry value
to 0.67.0 (it should currently be at 0.68). The changes in the profiles
format were relatively insignificant so you shouldn't lose anything.

RM> PS: I hope this list is still functional - it has become a tad silent
RM> over the years ;)

 I'd love to say that it's because M is so perfect that nobody complains
about it :-/ If only I didn't have several gazillion ideas about how it
could be improved...

 Thanks for reporting this bug,
VZ

Re: [M-User] How to manage identities correctly?

[Vadim Z. <vz-...@ze...>]

On Sat, 4 Aug 2012 18:27:08 +0200 mar...@we... wrote:

> I created two identities, each with their own POP3-server,

 Hi again,

 This is not really relevant to your question but let me say that it's
probably not a good idea to use M with POP3 servers. Support for them is
notionally there, but M is an IMAP client first and foremost and I must
have last tested POP3 in the last millennium.

> SMTP-server, email-adress and user name.  What I wanted to achieve was to
> receive emails from the two POP3 servers and sent to the two SMTP servers
> switchign to one or the other identity. But that didn't work.  It doesn't
> switch SMTP servers.  There can only one SMTP server be configured.

 Actually, the options are a superposition of the folder settings and
identity settings and normally the latter should overwrite the former.

> And if I remove all server information in the Preferences and only have
> two different SMTP servers in the properties of the two folders, it can not
> send mail at all, but reports instead: Invalid host specifier:
> /novalidate-cert

 This is obviously a bug :-(

> Obviously it tried it with no host at all. So it takes the
> SMTP host name from the general Preferences, but in order to maintain two
> identitties I'd need it to use the SMTP host names ans user names from the
> folder properties or from the identities.  How do I achieve this?

 What definitely works -- as I sometimes use this myself -- is to have
several identities with different SMTP servers and select the one you want
to use explicitly in the combobox to the right of "From" address in the
composer window. Did you try to do it like this?

 Regards,
VZ

Re: [M-User] Does Mahogany support X.509 certificates

[Vadim Z. <vz-...@ze...>]

On Sat, 4 Aug 2012 15:00:41 +0200 Markus Selve <mar...@we...> wrote:

MS> Can I attach a certificate to my account and sign my emails?  Can I extract
MS> the private keys from emais I receive, attach them to addresses in my
MS> address book and send X.509 encrypted emails to those addreses? If Mahogany
MS> supports that, how are those tasks done?

 Hello Markus,

 No, M doesn't support X.509 certificates. I looked into this several years
ago but it was quite a non-trivial thing to add so it also doesn't look
likely that support for this is going to be added in the observable future,
unless I personally suddenly have an urgent need for it.

 Sorry,
VZ

[M-User] How to manage identities correctly?

[<mar...@we...>]

I created two identities, each with their own POP3-server, SMTP-server,
email-adress and user name.  What I wanted to achieve was to receive emails
from the two POP3 servers and sent to the two SMTP servers switchign to one
or the other identity. But that didn't work.  It doesn't switch SMTP
servers.  There can only one SMTP server be configured.  Although if I open
the properties there is in each of the folder under network another server
configured it uses the one server that is configuered in Preferences.  I
checked that in the log window (detailed mail transfer logging enabled).
 And if I remove all server information in the Preferences and only have
two different SMTP servers in the properties of the two folders, it can not
send mail at all, but reports instead: Invalid host specifier:
/novalidate-cert Obviously it tried it with no host at all. So it takes the
SMTP host name from the general Preferences, but in order to maintain two
identitties I'd need it to use the SMTP host names ans user names from the
folder properties or from the identities.  How do I achieve this?

Regards, Markus.

[M-User] Does Mahogany support X.509 certificates

[Markus S. <mar...@we...>]

Can I attach a certificate to my account and sign my emails?  Can I extract
the private keys from emais I receive, attach them to addresses in my
address book and send X.509 encrypted emails to those addreses? If Mahogany
supports that, how are those tasks done?

Regards, Markus.

[M-User] folders on smb network shares - march snapshot

[Rick M. <ra...@gm...>]

Hello,

I just updated to the march snapshot, and have discovered the following issue:

10.07.2012 21:00:52: Mail log: Can't open mailbox \\SKELETOR\rick\home\RICKNET\rick\AppData\Mahogany\lists\dm-crypt: no such mailbox
10.07.2012 21:00:52: Could not open mailbox 'lists/dm-crypt'.

When the file clearly exists (pasting the line into explorer opens the file) and has worked with the 2008 snapshot.

Is this a bug, a problem with the ported configuration, or something else entirely?

I hope someone can help, as I'm somewhat worried about the changes the latest snapshot did to my configuration, and whether going back to the old M.exe will safely recover my settings.

Best regards,

Rick

PS: I hope this list is still functional - it has become a tad silent over the years ;)

Re: [M-User] drop down icon for viewers

[Nerijus B. <ne...@us...>]

On Wed, 6 Oct 2010 21:30:45 +0200 Vadim Zeitlin <vz-...@ze...> wrote:

VZ> NB> Does not work here. Earlier I used Ctrl-Shift for switching languages. Now
VZ> NB> I use another shortcut for this, but Ctrl-Shift-[123] still does not work.
VZ> NB> Nothing happens.
VZ> 
VZ>  I think it would be much simpler to fix this (in wx, I suppose) than do
VZ> anything else. Can you build the wx keyboard sample and check if pressing
VZ> this key combination results in the appropriate output there?

Yes, it does. I sent screenshot but got back "Message body is too big: 49550 bytes
with a limit of 40 KB".

Regards,
Nerijus

Re: [M-User] drop down icon for viewers

[Vadim Z. <vz-...@ze...>]

On Mon, 4 Oct 2010 21:14:36 +0300 Nerijus Baliunas <ne...@us...> wrote:

NB> On Mon, 4 Oct 2010 18:54:27 +0200 Vadim Zeitlin <vz-...@ze...> wrote:
NB> 
NB> VZ>  I just use Ctrl-Shift-[123] normally but why not..
NB> 
NB> Does not work here. Earlier I used Ctrl-Shift for switching languages. Now
NB> I use another shortcut for this, but Ctrl-Shift-[123] still does not work.
NB> Nothing happens.

 I think it would be much simpler to fix this (in wx, I suppose) than do
anything else. Can you build the wx keyboard sample and check if pressing
this key combination results in the appropriate output there?

 Thanks,
VZ

Re: [M-User] drop down icon for viewers

[Nerijus B. <ne...@us...>]

On Mon, 4 Oct 2010 18:54:27 +0200 Vadim Zeitlin <vz-...@ze...> wrote:

VZ>  I just use Ctrl-Shift-[123] normally but why not..

Does not work here. Earlier I used Ctrl-Shift for switching languages. Now
I use another shortcut for this, but Ctrl-Shift-[123] still does not work.
Nothing happens.

Regards,
Nerijus

Re: [M-User] drop down icon for viewers

[Vadim Z. <vz-...@ze...>]

On Fri, 1 Oct 2010 18:51:31 +0300 Nerijus Baliunas <ne...@us...> wrote:

NB> I use View->"Viewer to use" quite a lot, but while moving to choose
NB> viewer to the right if mouse accidentally moves up, I am out of the
NB> View menu and should have to start again. So I think a drop down
NB> icon with viewers in a main toolbar would be nice.

 I just use Ctrl-Shift-[123] normally but why not... OTOH I thought that
maybe having a toolbar on top of the message view window (or maybe even at
its bottom?) with some common message-related functions could be better.
It could include this combobox, also some way to quickly toggle the view
filters and headers (although again it wouldn't be quicker than pressing
'h', of course). Maybe also some controls to deal with the attachments as
the UI for them is currently quite poor.

 Unfortunately I don't think I'm going to have time for this any time soon,
I really need to finish my other work-in-progress items when I can get back
to M the next time first. But I still think adding a toolbar to message
view could be a good idea from UI point of view.

 Regards,
VZ

[M-User] drop down icon for viewers

[Nerijus B. <ne...@us...>]

Hello,

I use View->"Viewer to use" quite a lot, but while moving to choose
viewer to the right if mouse accidentally moves up, I am out of the
View menu and should have to start again. So I think a drop down
icon with viewers in a main toolbar would be nice.

Regards,
Nerijus

Re: [M-User] vcc.y: Permission denied

[<jyq...@go...>]

On Monday 22 March 2010 11:10:19 Vadim Zeitlin wrote:
> And I still have no idea why
> didn't this work for you (which was why I asked for the value of YACC in
> your makeopts).

Oh.
The value was:
YACC := 

Yes, it seems like configure 'should have' handled the case of my not having a yacc installed correctly. 
I also did not and do not have bison installed.
I will try it next.

Have a nice day/night.

Re: [M-User] vcc.y: Permission denied

[Vadim Z. <vz-...@ze...>]

On Mon, 22 Mar 2010 09:23:15 +0100 jyq...@go... wrote:

> The problem was that I had no yacc.

 This shouldn't be a problem though. If you look at the file makerules you
can see that there is an "ifdef YACC" there and if configure didn't detect
YACC this ifdef should make a rule which just copies an existing
(pre-yacc'd) file instead of running yacc. And I still have no idea why
didn't this work for you (which was why I asked for the value of YACC in
your makeopts).

> I installed btyacc and got errors like:

 Sorry, I've never used btyacc so I have no idea whether it can be used
with this file. I'd advise installing bison which should be provided by
your distribution (if you're under Linux) and is available in source form
for any system.

 Good luck,
VZ

Re: [M-User] vcc.y: Permission denied

[<jyq...@go...>]

Thank you for your previous reply.

The problem was that I had no yacc.  It is a strange error.

I installed btyacc and got errors like:

gcc -o wx/vcard/vcc.o -c -I/usr/local/share/Source/Git/M/include -I/usr/local/lib/wx/include/gtk2-unicode-2.9 -I/usr/local/include/wx-2.9 -D_FILE_OFFSET_BITS=64 -DWXUSINGDLL -D__WXGTK__ -I/usr/local/share/Source/Git/M/lib/imap/c-client -I/usr/local/share/Source/Git/M/lib/compface -I/usr/local/share/Source/Git/M/src/wx/vcard -pipe -march=native -pthread --fast-math --exec-charset=UTF-8 --input-charset=UTF-8 --unsigned-char --unit-at-a-time -Winline -ggdb1 -pthread -O0 -Wall -MMD -I.src/wx/vcard   wx/vcard/vcc.c
btyaccpa.ske:111:3: error: expected specifier-qualifier-list before ‘yyparsestate’
btyaccpa.ske:128:21: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
btyaccpa.ske:131:21: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

I'll try again with byacc (Berkeley YACC).

Re: [M-User] vcc.y: Permission denied

[Vadim Z. <vz-...@ze...>]

On Sun, 21 Mar 2010 19:18:18 +0100 jyq...@go... wrote:

> Compiling git head, i get:
> 
> wx/vcard/vcc.y 
> make[1]: execvp: wx/vcard/vcc.y: Permission denied
> make[1]: *** [wx/vcard/vcc.c] Error 127
> 
> vcc.y does not look like an executable file.
> Solution to the puzzle?

 Not obvious. What did configure find as yacc program on your system?
Could you please do "fgrep YACC makeopts" in the directory where you ran
it?

 Thanks,
VZ

[M-User] vcc.y: Permission denied

[<jyq...@go...>]

Compiling git head, i get:

wx/vcard/vcc.y 
make[1]: execvp: wx/vcard/vcc.y: Permission denied
make[1]: *** [wx/vcard/vcc.c] Error 127

vcc.y does not look like an executable file.
Solution to the puzzle?

Re: [M-User] SVN access

[Vadim Z. <vz-...@ze...>]

On Sun, 28 Feb 2010 13:12:45 +0100 oobeisaam <jyq...@go...> wrote:

o> git clone git://mahogany.git.sourceforge.net/gitroot/mahogany/mahogany
o> Initialized empty Git repository
o> fatal: The remote end hung up unexpectedly

 Oops, sorry. It's "M" at the end and not "mahogany" (I wonder why does SF
give wrong instructions though). I.e. please run

	git clone git://mahogany.git.sourceforge.net/gitroot/mahogany/M

 Sorry,
VZ

Re: [M-User] SVN access

[oobeisaam <jyq...@go...>]

git clone git://mahogany.git.sourceforge.net/gitroot/mahogany/mahogany
Initialized empty Git repository
fatal: The remote end hung up unexpectedly