got my iMON PAD IR/VFD 15c2:0036 working a couple of weeks ago in
Mythbuntu 8.10 with a self compiled version of lirc 0.8.3. I been
fiddling around to make the remote work as I want it to (and also
teach my Pronto Neo the tricks). Though, I have recognized something
Lirc works fine as long as I'm just sending iMON codes but as soon
I'm sending an IR code to the amp or TV for example lirc freezes up and
it takes a couple of iMON codes to make it work again. It's just like
lirc is buffering the codes but can't understand them, then it takes a
couple of "real" codes to flush out the "bad" ones out.
For example, I'm pressing pause to stop playback, I press pause again
and playback starts, no problem. Then I press pause, playback stops, I
raise the volume on the amp but when pause is pressed again nothing
happens. I have to press pause two more times to make it work. Then
everything is back to normal until next time I need to control a
When I control other devices nothing shows up when running mode2 or
irw. The iMON codes needed to flush out the "bad" ones don't show up
I start lirc with these commands:
/usr/sbin/lircd --device=/dev/lirc0 --listen=8765 --listen
/usr/sbin/lircd --device=/dev/lirc1 --connect=localhost 8765
--output=/dev/lircd --connect=localhost 8765
I would need something to make lirc ignore the codes it doesn't
understand, but I have found nothing on this when searching the forums.
Any ideas how to solve this would be highly appreciated!
News, entertainment and everything you care about at Live.com. Get it now!