Hi all,
I'm new to this forum and was very excited one hour ago to be able to play with the TV API. Sadly, things are not as they should be.
What i can say so far :
http 192.168.0.90:1925/1/system { "country": "France", "menulanguage": "French", "model": "55PFL8008K/12", "name": "Tele", "serialnumber": ".......", "softwareversion": "QF2EU-0.171.56.0" }
i can POST on volume API and see changes on volume value/mute status on the TV
i can GET ambilight cached data (zero everywhere) or GET processed / measured values (non zero values)
i can POST the mode to be manual (pixels are turning off), and check that the new mode is ok with a GET
BUT, if i try to POST new pixels values into the cached : . the reply is an HTTP 200 "<html><head>
To confirm the problem : - i have access to the demo page http://...ip...:1925/1/examples/ambilight/ambilight.html but JS code seems buggy, and anyway changes are not being reflected to the TV ambilight pixels. - no changes with the code found on https://sourceforge.net/p/jointspace/discussion/1020525/thread/25677a55/ : code is executing but no changes on TV.
Any idea ? Tx for help Pascal.
It appeared that after some firmware release, i was able to make it work without any change on my side. Let's hope this is permanent.
And since then, as said in another post, i could build a cool library to pilot the Ambilight leds : https://github.com/pascalif/AmbilightParty
P.
Log in to post a comment.
Hi all,
I'm new to this forum and was very excited one hour ago to be able to play with the TV API. Sadly, things are not as they should be.
What i can say so far :
i can POST on volume API and see changes on volume value/mute status on the TV
i can GET ambilight cached data (zero everywhere) or GET processed / measured values (non zero values)
i can POST the mode to be manual (pixels are turning off), and check that the new mode is ok with a GET
BUT, if i try to POST new pixels values into the cached :
. the reply is an HTTP 200 "<html><head>
. pixels are not changed
. A GET on /cached still returns zeros.
To confirm the problem :
- i have access to the demo page http://...ip...:1925/1/examples/ambilight/ambilight.html
but JS code seems buggy, and anyway changes are not being reflected to the TV ambilight pixels.
- no changes with the code found on https://sourceforge.net/p/jointspace/discussion/1020525/thread/25677a55/ : code is executing but no changes on TV.
Any idea ?
Tx for help
Pascal.
It appeared that after some firmware release, i was able to make it work without any change on my side. Let's hope this is permanent.
And since then, as said in another post, i could build a cool library to pilot the Ambilight leds : https://github.com/pascalif/AmbilightParty
P.