#18 [UNKNOWN CARD]

[Anonymous]

Card is a recent Hauppauge PVR 250. ivtv and lspci follow.

Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.3.1 (x) loading
ivtv: Linux version: 2.6.9-1.681_FC3smp SMP 686 REGPARM
4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV
lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Unknown card: vendor/device: 4444/0016, subsystem
vendor/device: 0070/0009ivtv: Defaulting to WinTV PVR
150 card
ivtv: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
ivtv: card you have to the ivtv-devel mailinglist:
http://sourceforge.net/projects/ivtv
ivtv: Prefix your subject line with [UNKNOWN CARD].
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level,
low) -> IRQ 217
ivtv: XXX PCI device: 0x2578 vendor: 0x8086
tuner: Ignoring new-style parameters in presence of
obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: Ignoring new-style parameters in presence of
obsolete ones
cx25840: starting probe for adapter ivtv i2c driver #0
(0x10005)
wm8775: Ignoring new-style parameters in presence of
obsolete ones
wm8775: starting probe for adapter ivtv i2c driver #0
(0x10005)
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 4 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers
4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Could not detect tuner standard, defaulting to NTSC.
tuner: tuner type not set
ivtv: i2c client addr: 0x44 not found!
ivtv: Switching standard to NTSC.
tuner: tuner type not set
ivtv: i2c client addr: 0x44 not found!
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV
====================
ivtv: ivtv_enc_thread: pid = 3466, itv = 0x4444ada0

02:0a.0 Multimedia video controller: Internext
Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.:
Unknown device 0009
Flags: bus master, medium devsel, latency 64,
IRQ 217
Memory at d8000000 (32-bit, prefetchable)
[size=64M]
Capabilities: [44] Power Management version 2