hi
got another message now
after "init started : busybox ...3
i got
"mounting /dev/mtdblock0 on /mnt failed:
no such file or directory"
so i assume that /mnt doesnt exist ???
even then, can i connect via serial port ?
by the way, did u make a cable from extport
to pc serial port ?
[ and do u have to change from 3V to 5V ? ]
help welcomed :)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi!
This is due to a problem we're facing with the SMC driver. By some reason, the FAT sector is being mistakenly calculated and then /dev/mtdblock0 doesn't help too much when trying to mount the device (yes, /mnt exists).
By the way, it's possible to connect it via serial port. You just need to convert the voltage settings (with a MAX3222 or MAX3225, probably) and use a terminal program like minicom to log in.
Good luck :)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hi
got another message now
after "init started : busybox ...3
i got
"mounting /dev/mtdblock0 on /mnt failed:
no such file or directory"
so i assume that /mnt doesnt exist ???
even then, can i connect via serial port ?
by the way, did u make a cable from extport
to pc serial port ?
[ and do u have to change from 3V to 5V ? ]
help welcomed :)
Hi!
This is due to a problem we're facing with the SMC driver. By some reason, the FAT sector is being mistakenly calculated and then /dev/mtdblock0 doesn't help too much when trying to mount the device (yes, /mnt exists).
By the way, it's possible to connect it via serial port. You just need to convert the voltage settings (with a MAX3222 or MAX3225, probably) and use a terminal program like minicom to log in.
Good luck :)