Thanks to the developers of this app. Great job!
I'm using it with Huawei ets cdma phone, which usses the qualcomm chipset. It requires hard flow control. But I noticed that efax was using software flow control, causing garbaged lines on the receiving machine (the log reports it as failed). efax still uses +FLO=1 after specifing -o h. I was unable to test fax transmission with this setting yet here's the waiting command log:
Further more busy & dial tone detection should be disabled for this modem, though it dials fine already. Should I have to disalbe them, if so how can I do this?
Please help me. If I get this working I'll save my run to the library for my faxing needs.
Thanks in advance.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi there!
Thanks to the developers of this app. Great job!
I'm using it with Huawei ets cdma phone, which usses the qualcomm chipset. It requires hard flow control. But I noticed that efax was using software flow control, causing garbaged lines on the receiving machine (the log reports it as failed). efax still uses +FLO=1 after specifing -o h. I was unable to test fax transmission with this setting yet here's the waiting command log:
ajit@ajit-desktop:~$ efax-0.9a -d /dev/ttyUSB0 -o 0h -v cm -c 1,3,0,2,0,1,0,0 -w
efax-0.9a: Mon 06 Aug 2007 07:12:42 PM IST efax v 0.9a-001114 Copyright 1999 Ed Casas
efax-0.9a: Mon 06 Aug 2007 07:12:42 PM IST efax v 0.9a-001114 Copyright 1999 Ed Casas
efax-0.9a: 19:12:42 compiled Aug 6 2007 18:17:19
efax-0.9a: 19:12:42 command "Q0V1"
efax-0.9a: 19:12:42 waiting 2.0 s
efax-0.9a: 19:12:42 .623 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:42 response "OK"
efax-0.9a: 19:12:42 command "E0"
efax-0.9a: 19:12:42 waiting 5.0 s
efax-0.9a: 19:12:42 .751 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:42 response "OK"
efax-0.9a: 19:12:42 command "I3"
efax-0.9a: 19:12:42 waiting 5.0 s
efax-0.9a: 19:12:42 .879 [<CR><LF>ERROR<CR><LF>]
efax-0.9a: 19:12:42 response "ERROR"
efax-0.9a: 19:12:42 command "+FCLASS=2.0"
efax-0.9a: 19:12:42 waiting 5.0 s
efax-0.9a: 19:12:42 .995 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:42 response "OK"
efax-0.9a: 19:12:43 command "+FMI?"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .111 [<CR><LF>ERROR<CR><LF>]
efax-0.9a: 19:12:43 response "ERROR"
efax-0.9a: 19:12:43 command "+FMM?"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .231 [<CR><LF>ERROR<CR><LF>]
efax-0.9a: 19:12:43 response "ERROR"
efax-0.9a: 19:12:43 command "+FMR?"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .347 [<CR><LF>ERROR<CR><LF>]
efax-0.9a: 19:12:43 response "ERROR"
efax-0.9a: 19:12:43 command "+FIP"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .475 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:43 response "OK"
efax-0.9a: 19:12:43 command "+FNR=1,1,1,0"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .615 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:43 response "OK"
efax-0.9a: 19:12:43 command "+FLO=1" <<<<<<<<<<<<<
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .751 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:43 response "OK"
efax-0.9a: 19:12:43 command "+FBO=0"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:43 .887 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:43 response "OK"
efax-0.9a: 19:12:43 command "+FCR=1"
efax-0.9a: 19:12:43 waiting 5.0 s
efax-0.9a: 19:12:44 .027 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:44 response "OK"
efax-0.9a: 19:12:44 command "+FCC=1,3,0,2,0,1,0,0"
efax-0.9a: 19:12:44 waiting 5.0 s
efax-0.9a: 19:12:44 .067 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:44 response "OK"
efax-0.9a: 19:12:44 command "+FLI=" ""
efax-0.9a: 19:12:44 waiting 5.0 s
efax-0.9a: 19:12:44 .099 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:44 response "OK"
efax-0.9a: 19:12:56 command "Q0V1"
efax-0.9a: 19:12:56 waiting 2.0 s
efax-0.9a: 19:12:56 .135 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:56 response "OK"
efax-0.9a: 19:12:56 command "H"
efax-0.9a: 19:12:56 waiting 5.0 s
efax-0.9a: 19:12:56 .250 [<CR><LF>OK<CR><LF>]
efax-0.9a: 19:12:56 response "OK"
Is there something wrong with efax?
Further more busy & dial tone detection should be disabled for this modem, though it dials fine already. Should I have to disalbe them, if so how can I do this?
Please help me. If I get this working I'll save my run to the library for my faxing needs.
Thanks in advance.