#2 pppoeci should use the correct alt

[Anonymous]

-alt needs to be set in peers/adsl for pppoeci
because....

1: the default configuration (0) should not support ISO
transfers
2: pppoeci only allocates 448 bytes for each ISO
endpoint, the modem may try to push upto 1008 if the
wrong alternate inferface is chosen.

For me the correct -alt is 4

cat /proc/bus/usb/devices
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64
#Cfgs= 1
P: Vendor=0915 ProdID=8000 Rev= 1.00
S: Manufacturer=GlobeSpan Inc.
S: Product=USB-ADSL Modem
S: SerialNumber=FFFFFF
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS=1008 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 912 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 736 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 240 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
Driver=usbfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 96 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=3ms

[FlashCode]

Logged In: YES
user_id=254358

Obsolete since v0.9