I'm using version 1.1.5 with the patch for Sony drives
from a previous bug report. But I still get this error
message:
[bryce@hardhat JustEnough]#
~bryce/work/cdrdao-1.1.5/dao/cdrdao write --device
0,0,0 --speed 2 cdrdao-il.toc
Cdrdao version 1.1.5 - (C) Andreas Mueller
<andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
L-EC encoding library - (C) Heiko Eissfeldt
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for
current driver tables.
Using libscg version 'schily-0.5'
0,0,0: SONY CD-RW CRX140E Rev: 1.0n
WARNING: Cannot read driver table from file
"/usr/local/share/cdrdao/drivers" - using built-in
table.
Using driver: Generic SCSI-3/MMC - Version 1.2 (options
0x0010)
Starting write at speed 2...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually
CTRL-\).
Executing power calibration...
Power calibration successful.
Writing CD-TEXT lead-in...
Writing track 01 (mode AUDIO/AUDIO)...
Writing track 02 (mode AUDIO/AUDIO)...
Writing track 03 (mode AUDIO/AUDIO)...
Writing track 04 (mode AUDIO/AUDIO)...
Writing track 05 (mode AUDIO/AUDIO)...
Writing track 06 (mode AUDIO/AUDIO)...
Writing track 07 (mode AUDIO/AUDIO)...
Writing track 08 (mode AUDIO/AUDIO)...
Writing track 09 (mode AUDIO/AUDIO)...
Writing track 10 (mode AUDIO/AUDIO)...
Wrote 220 of 220 MB (Buffer 100%).
Wrote 98321 blocks. Buffer fill min 93%/max 100%.
?: Input/output error. : scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 01 9A 14 12 00 00 00 00 02 00
00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 104980 (valid)
cmd finished after 0.007s timeout 180s
WARNING: TEST UNIT READY failed after recording.
Flushing cache...
Writing finished successfully.
[bryce@hardhat JustEnough]# cdrdao disk-info --device
0,0,0
CD-RW : no
Total Capacity : 21:57:00 (98775 blocks, 192/221
MB)
CD-R medium : CMC Magnetics Corporation
Short Strategy Type, e.g.
Phthalocyanine
Recording Speed : n/a
CD-R empty : yes
Logged In: YES
user_id=5517
Looks like the recorder detected a write error while writing
the lead-out. Does it happen all the time?
Logged In: NO
This happens often, not all the time.
Logged In: NO
Here's another example. The resulting CD is fine:
Wrote 97780 blocks. Buffer fill min 93%/max 100%.
?: Input/output error. : scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 01 9A 11 12 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 104977 (valid)
cmd finished after 0.001s timeout 180s
WARNING: TEST UNIT READY failed after recording.
Flushing cache...
Logged In: YES
user_id=402823
I am having the same problem - intermittent. The disc (I
am using CDRW) plays okay in my DVD player and can be read
in my DVD ROM but is unusable in the CDR drive (Zip
CD650). When I insert the disc, the ready light flashes
constantly. Looks like a session was not closed or
something. I now have a lot of coasters unless I can find
another CDR drive that can read them (if the DVD player
can read them and my DVD drive can, maybe it's a specific
issue with my write)
Logged In: NO
I often get this after the last audio track is written:
cdrdao: Input/output error. : scsi sendcmd: retryable error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 03 00 01 9D 05 12 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 105733 (valid)
WARNING: TEST UNIT READY failed after recording.
Flushing cache...
Writing finished successfully.
This error is NOT a predictor for a bad discs. Sometimes
good discs get this error. Sometimes bad ones don't.
The disc in question ended up with scrabled audio on all
tracks,
even though the error only appeared at the end.