#8 Not working with PCM-350 cards

[Pieter Smit]

The airo driver does not get the PCMCIA cards going. I
have been experiencing this problem since 2.4.20, could
also be due to firmware upgrade.

Any suggestions what can be tried ?

Regards,
Pieter Smit
diepes@hotmail.com
##With CVS
May 1 09:02:19 peslaptop cardmgr[1234]: socket 0: 350
Series Wireless LAN Adapter
May 1 09:02:19 peslaptop cardmgr[1234]: executing:
'modprobe airo'
May 1 09:02:19 peslaptop kernel: airo: Probing for
PCI adapters
May 1 09:02:19 peslaptop kernel: airo: Finished
probing for PCI adapters
May 1 09:02:19 peslaptop cardmgr[1234]: executing:
'modprobe airo_cs'
May 1 09:02:19 peslaptop cardmgr[1234]: + Warning:
loading
/lib/modules/2.4.21-rc1pescc/kernel/drivers/net/wireless/airo_cs.o
will taint the kernel: no license
May 1 09:02:19 peslaptop cardmgr[1234]: + See
http://www.tux.org/lkml/#export-tainted for information
about tainted modules
May 1 09:02:19 peslaptop cardmgr[1234]: + Module
airo_cs loaded, with warnings
May 1 09:02:19 peslaptop kernel: airo: register
interrupt 0 failed, rc -16
May 1 09:02:19 peslaptop kernel: airo_cs:
RequestConfiguration: Operation succeeded
May 1 09:02:20 peslaptop cardmgr[1234]: get dev info
on socket 0 failed: Resource temporarily unavailable

Without
Apr 16 21:51:19 peslaptop cardmgr[1340]: socket 0: 350
Series Wireless LAN Adapter
Apr 16 21:51:19 peslaptop cardmgr[1340]: executing:
'modprobe airo_cs'
Apr 16 21:51:19 peslaptop kernel: airo: Probing for
PCI adapters
Apr 16 21:51:19 peslaptop kernel: airo: Finished
probing for PCI adapters
Apr 16 21:51:20 peslaptop kernel: airo: Doing fast
bap_reads
Apr 16 21:51:21 peslaptop kernel: airo: Max tries
exceeded waiting for command
Apr 16 21:51:21 peslaptop kernel: airo: MAC could not
be enabled
Apr 16 21:51:21 peslaptop kernel: airo_cs:
RequestConfiguration: Operation succeeded
Apr 16 21:51:22 peslaptop cardmgr[1340]: get dev info
on socket 0 failed: Resource temporarily unavailable

[Nobody/Anonymous]

Logged In: NO

I had this same problem, this is because of the 5.x
firmware. Downgrade to 4.25.30, and get the windows ACU
utility for 4.25.30 also. Seems that these linux drivers
don't work with the 5.x firmware (this is straight from
Cisco themselves).

Jason