Open Source Hardware Platforms - Page 4

USB Resources for Microchip Microcontrollers and libusb, also libftdi and openocd binaries

A portable library to access braille displays.

Open DMX USB interface: this project created by ENTTEC (www.enttec.com) is an open source hardware and software DMX512 interface

UK-International keyboard layouts is an effort to create and distribute a UK keyboard layout like US-International. The project has layouts for Windows, MacOS X and Linux. Keyboard Layouts were tested successfully under Windows 7 If you need Chromebook version of this keyboard follow this link: https://github.com/leodip/uk-international-keyboard-for-chromebook

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

Smartcard access lib for Arduino based boards connected directly to a smartcard. This is currently a work in progress. Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. Mostly used for secure data storage. Open points: - Error handling not completly implemented. No retries if parity error is found. - Setup of communication parameters from ATR - T=1 communication not supported (Still possible via "raw" sendBytes(..) / receiveBytes(..))

5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component.

The DarkLight Cover/Calibrator, known going forward as DLC, is a Do-It-Yourself (DIY) solution using an Arduino Nano, servo motor, and if desired, an Electroluminescent (EL) Panel. This device, also known as a flip/flat panel, aims to act as a dust cover for remote telescope users, and a calibration panel if desired. With the DarkLight, fully compliant, ASCOM driver, the cover can be operated using the DLC Windows application or any automation software supporting the ICoverCalibrator driver in ASCOM v6.5 or newer. While this device DOES NOT make the scope weatherproof, it is an excellent addition to any observatory to accomplish hands-off control of the cover. If elected, it can be expanded to include a hands-off dark/light calibration capability for astrophotography. (c) Copyright Nathan Woelfle 2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author.

jTomtom is et Java GPS updater. With jTomtom you can update the QuickFix et Radar POI in your Tomtom GPS

Sulin is rolling donkey Gitlab: https://gitlab.com/sulinos Github: https://github.com/sulinos Telegram: https://t.me/sulinos powered by donkey team

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

libVISCA is a library for controlling a VISCA compliant video camera. VISCA is a professional camera control protocol, designed by Sony to be used on several of its surveillance and OEM block cameras.

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.

libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.

offene Implementierung von Modulen und Software für den PHC Installationsbus von Fa. PEHA (tm)

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. These adapters could be internal (like those built into laptops or desktop motherboards) or external (such as USB Wi-Fi dongles). Specifically, the driver is commonly associated with devices that use certain chipsets, like those made by companies such as Realtek, Atheros, Ralink, or Broadcom.

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

This program is a cross-platform replacement for the widely known in close circles Parameter Design tool (also known as Keywin e-Bike Lab), used to set the parameters of a e-bike controller based on the Infineon XC846 microcontroller (and various clones).

cobol2j reads or writes COBOL or RPG data files imported from mainframes, AS/400 or Baby/36 environment. Packed decimal, zoned or packed date fields decoding included. EBCDIC conversion. ETL ISAM data to any other platform. PC Cobol ( ASCII ) supported.

Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. The new location for the project is https://github.com/open-hpi/openhpi

Open NFC is an open source stack implementing the NFC functionnalities for many OSes. The Open NFC stack offers a comprehensive set of NFC API for Android, Linux and Windows Mobile.