Open Source Linux Hardware Platforms - Page 9

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

The MtxOrbCtl program allows you to control a Matrix Orbital Serial LCD screen from the command line. It is designed to be used in conjunction with shell scripting to show the status of boots, etc.

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

libVISCA is a library for controlling a VISCA compliant video camera. VISCA is a professional camera control protocol, designed by Sony to be used on several of its surveillance and OEM block cameras.

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

Programmer for Atmel AVR microcontrolers that uses PC parallel port to program the device in serial mode. The device can be programmed "in-system". Comes with a schematic of the hardware required. Hardware designed to be simple, efficient and unexpensive.

Canon EOS class remote control utility for 300D, 350D, 30D, 20D and 5D. It is possible to control more of Canon cameras in the same time up to six cameras attached. Multican allows scripted remote control of multiple cameras.

You will find here experimental drivers for ATI videocards and TV/Video related applications.

NvClock is a utility with which you can tweak your nvidia card. You can adjust the speeds of your card. Soon you will also be able to do other things then just overclocking. You will be able to tweak OpenGL settings and your xfree86 config file.

This program was born as a parody of another *-Z utilities like CPU-Z or GPU-Z. It shows some basic information about OpenCL-enabled GPUs and CPUs.

This project lives now under http://ivtvdriver.org/. Old description: The primary goal of this project is to provide an Open Source driver for the Hauppauge 250/350 series of MPEG video capture cards and other cards based on the iCompression iTVC15.

----- ENGLISH ---- Driver for the Novation 'launchpad' NOVLPD01 NOT FOR 'LAUNCHPAD S' For more information about my launchpad project, go here: http://videca.wordpress.com/2012/09/24/endriver-for-novation-launchpad/ ---- FRANCAIS ---- Driver pour le launchpad NOVLPD01 de Novation, PAS POUR LE 'LAUNCHPAD S' Pour plus d'informations sur mon projet launchpad, faites un tour ici : http://forum.ubuntu-fr.org/viewtopic.php?id=1043581

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

TiVo USB Wireless Adapter device driver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the same.

This program works as an interface between a USB B2k Telbox and skype. The software used X11 messageing to communicate with skype so works with current linux distribution's and with the latest version of skype.

Development of a driver and utilities to use 3Com ADSL Modem USB at Linux and Windows operating systems. Desarrollo de un driver y utilidades para utilizar el 3Com ADSL Modem USB en los sistemas operativos Linux y Windows.

This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o)

Community project to port Linux drivers to VMware's ESX and ESXi products to expand hardware support in ESX/ESXi.

Compatibility library/layer for USB (serial-type) to GPIB interface, a C-based library with Linux-GPIB and NI-type library calls such as ibrd() and ibwrt(). Includes LabView VIs modeled on those in the standard 488 interface l Works with/compiled for Linux and Windows

UCSC SMART suite controls and monitors storage devices using the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) build into ATA and SCSI Hard Drives. This is used to check the reliability of the hard drive and predict drive failures.

A linux userspace device driver that allows joystick events to be remapped. Several joysticks can be combined into a single controller, and button/axes events can be remapped to new joystick, keyboard or mouse events. Advanced scripting also supported.

This is an attempt to write a Broadcom 43xx driver for Linux, based on this specification: http://bcm-specs.sipsolutions.net/

Driver for Aladdin eToken PRO

A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC