Open Source C Hardware Platforms for Windows - Page 7

The “lpACLib” library contains the VHDL description of accurate and approximate versions of several arithmetic modules (like adders and multiplier of different bit-widths) and accelerators. Moreover, it also provides the corresponding software behavioral models/implementations developed in C and MATLAB to enable quality characterization. Besides our novel designs, it also contains implementations for several state-of-the-art arithmetic modules and their approximate versions. This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. In case of usage, please refer to our publication: Muhammad Shafique, Rehan Hafiz, Semeen Rehman, Walaa El-Harouni, Jörg Henkel, "Cross-Layer Approximate Computing: From Logic to Architectures", Design Automation Conference (DAC), 2016. Contributors: Authors, Vanshika Baoni, M. Abdullah Hanif http://ces.itec.kit.edu/lpACLib.php

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is required to communicate with serialLCD module. The library & firmware file is released in public domain as open-source project. Feel free to edit/improve/share it. *** Raspberry Pi python library added. video available on youtube at: http://youtu.be/adNOWREWuL8

Simple mixer control for ESI U24 USB soundcards

uLan is message oriented multi-master communication protocol for microcontrollers. It uses 9-bit character format for addressing and link control and RS-485 physical layer. More RS-485 cards, converters for PC RS-232 ports and embedded MCUs are supported

A driver for the 5DT datagloves written in pure C++ using only the STL. Meant to be cross-platform, but written on and developed for IRIX sytems.

A device driver in 'C' for interfacing a uController with a Displaytech 64128A LCD display (or its variants).It was written and tested on a Renesas R8C/25 microcontroller proto-board. It provides control, text and graphics functions as function cal

8051lib is a collection of easy-to-use C Functions and Assemble Languages Sets for the 8051 microcontroller. The Final Goal is to make the microcontroller developer focus on the Algorithms not the Hardware Drivers.

This project offers an uniformized way to interface a extented variety of analog-to-digital conv. chips to a computer that uses Windows. It is written in C as a set of plugin DLLs plus a central interface. The interface is intented to be VB compatible

The project's main goal is to create a component, capable of being added to Freesacle's Codewarrior environment with XBee stack, in order for adding a complete implementation of the ADS1115 functionalities to Digi's XBee radios

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

Aggressive Rectangle Truncation (ART) with Location Verfication Mechanism is a localization algorithm in wireless sensor networks written in nesC.

Firmware and Hardware for an MP3 player using an AVR Butterfly, VS1001K decoder and SD/MMC card with FAT filesystem.

AVRRA is an open source API that provides a framework for using Atmel AVR microcontrollers in small, embedded robots. It is implemented as a series of device drivers. AVRRA includes drivers for many popular low-cost sensors including Sharp IR sensors (GP

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

The Affordable BIOS Restoration Tool provides VHDL and C code to recover from failed BIOS upgrades using affordable CPLD's. EEPROM's and Flash chips can be restored with this flash programmer. Interfaces for DIP and tsop packages are being developed.

Agnix is a small operating system kernel for i386, supporting 32-bit protected memory mode, paging, hardware switched tasks, memory tests, PCI bus, devices, PCI IRQ routing, RT timers and network protocols.

AHN will be a home automation controling software. It is intended to drive an usb to X10 power line carrier interface that is a part of the project.

Stop press - Alt4 has moved to http://www.swiftcomm.co.uk/alt4

This Ethernet sniffer was designed to work together with the medical device for EEG acquisition BrainNet36® (BNT36), from EMSA Equipamentos Médicos Ltda. BrainNet36® has 36 channels, A/D converters with 16 bit accuracy, conversion time of 10 µs and Ethernet communication interface. Being a device for clinical purposes, BrainNet36® does not export data online. This sniffer was developed to allow online processing by working in promiscuous mode and recording data in a plain text file.

Various sketches and/or libraries for Arduino that people might find useful.

This is a sketch for Arduino that allows for the user to have multiple sketches on their Arduino, and then switch between them. For a video go to (coming soon). Requires Arduino 0022 or later to use get Arduino here: www.arduino.cc

A system designed to drive a computer motorized telescope mount to track artificial satellites in real time. Additionally, provides video time stamping using GPS via dedicated hardware solution.

A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application. This project has now migrated to GitHub. You can find the new repository at https://github.com/dfu-programmer/dfu-programmer

We construct a device that can receive a music stream from the network and then convert it into an audio signal. The stream is generated by a plug-in for a popular audio player on a PC.