Open Source BSD Embedded Systems Software

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

TeutonPE is inspired by PortableApps.com combined with a PeBuilder compiled Boot USB / CD. Programs can be used, even when there is no OS installed. BB4win is used for Live Menu and as the default Shell.All Plugins are also BartPE & XPE compatible

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

BSD Router Project (BSDRP) is a open source router distribution based on FreeBSD, supporting all majors routing protocols (RIP, OSPF, BGP, ISIS, PIM, etc..) and multi-tenant capabilities that fit on a 2GB Flash disk.

A fixed point math header-library for C, under a liberal license.

The C-Bus Module is used to provide a C-code API between a Clipsal C-Bus PCI interface, and an application program. Application programs can be on small embedded micros with no OS and only a few K of RAM, thru to Windows & Linux.

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

The wolfSSL embedded SSL library (formerly CyaSSL) is a lightweight, portable, C-language-based SSL/TLS library targeted at IoT, embedded, and RTOS environments primarily because of its size, speed, and feature set. It works seamlessly in desktop, enterprise, and cloud environments as well. wolfSSL supports industry standards up to the current TLS 1.2 and DTLS 1.2, is up to 20 times smaller than OpenSSL, offers a simple API, an OpenSSL compatibility layer, OCSP and CRL support, is backed by the robust wolfCrypt cryptography library, and much more. wolfSSL relies on the FIPS 140-2 validated wolfCrypt library for all cryptographic functionality. Visit http://wolfssl.com/wolfSSL/fips.html for more info!

With GLCD Tools you can convert windows bitmap files (bmp) to a byte array suitable for graphic LCD displays. Additionally you can create fontsets out of your system fonts for the displays. It outputs C Code which you can use in your µC project.

SmartSlog (Smart Space Ontology) is a software/application development kit (SDK or ADK) for programming Smart-M3 agents (Knowledge Processors, KPs) that consume/produce smart space content according with its high-level ontological representation. SmartSlog applies the code generation approach: given an OWL ontology description, the ontology programming library is produced. The latter provides API to access the smart space via a Smart-M3 Semantic Information Broker (SIB) and data structures and functions to represent and maintain locally in KP code all ontology classes, relations, properties, and individuals. Since 2012 the project is supported by grant KA179 of Karelia ENPI programme, http://kareliaenpi.eu/ More information about project: http://oss.fruct.org/wiki/SmartSlog Smart-M3 on Wikipedia: http://en.wikipedia.org/wiki/Smart-M3

This is only repository binary file. If you interest, visit the website https://gitlab.com/mzdonline/cmu-opkg. For developer to activate package management system on CMU. Developer can easy to build own package .Look at Makefile and opkg/*

UFFS: Ultra-low-cost Flash File System, designed for NAND flash working in embedded system. UFFS typically consumes less then 200K ram for 1Gb(page 512)/4Gb(page 2K) NAND flash. It supports direct flash interface, works with or without OS.

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in C++ and has been compiled on Linux.

ArduSim provides API level simulation of an Arduino. Arduino sketches can be run and debugged on PC with no modification. ArduGate is a sub-project of ArduSim. The agent sketch is shared.

smartCOM is a graphical serial device terminal, it's an alternative to minicom. It is aimed mainly at hardware developers who need a gui test tools to talk to their custom hardware. The GUI is written using the wxWidgets library, and using the tinyxml to save or load config. http://gnssinfo.com/2012/11/21/wiki-smartcom/

Terminal-BASIC is a BASIC-like language interpreter, works on a set of single board embedded systems (i.e. famous AVR uc based boards). Terminal-BASIC: * suports real numbers, multidimensional arrays and Darthmouth BASIC-style matrix operations; * written in C++11; * has modular structure (can save uc storage, instantiating only used modules); * works through different i/o devices, using vt100 commands; * on systems with multiple i/O devices can work as simple time-sharing system; * static Linux build for playing and debug;

A disassembler and a simulator for the MSP430 CPU. Both programs only read TI-TXT files. Licensed under the Simple Public License (SimPL) 2.0. For full license information, please read license.txt. Compiled executables are available for Windows and Mac OS X. Linux users will have to compile their own binaries. Instructions for compilation are included in README.txt. A Qt-based GUI is available for sim430. Binaries only for OS X, for now. Source files can be found in src/qt folder.

uEZ(r) is an open source, embedded middleware platform providing underlying RTOS and processor abstraction features enhancing portability of application code to multiple ARM platforms with high reusability. Developed by Future Designs, Inc. at https://www.teamfdi.com Doxygen docs available at https://www.teamfdi.com/uez/docs/index.html FDI Support: https://teamfdi.com/forums uEZ is now available in a 7-Zip archive in addition to the standard zip file. The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ 2.13.100 release updates Crossworks to v4.10.4, several LPC4357 driver updates, LPC4357 second core Cortex-M0 Crossworks Project Maker project , LPC4357 full screen video player uEZ 2.14.000 release updates Crossworks to v4.10.8 with several LPC4357 driver updates, lwIP full-duplex Ethernet with Jumbo Frames, MbedTLS, Amazon Web Services MQTT shadow demo over TSL 1.2, FreeRTOS+ additional libraries, SNMP/SNTP and TFTP/HTTP Server updates

This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort.

OBSOLETE - Please proceed to new repo: https://github.com/nasa/osal This project will be closed in the near future ALERT: The osal-4.2.1a release package is now available. This release package fixes a unit test makefile to use Modules.mak rather than using ut-modules.mak directly. The top-level readme.md file was also updated to add missing information. The OS Abstraction Layer (OSAL) project is a small software library that isolates embedded software from the real time operating system. The OSAL provides an Application Program Interface (API) to an abstract real time operating system.

DruidBSD is a FreeBSD micro-distribution that supports CD/DVD, USB, and HD booting into a Live BSD Distribution.

PCD – Process Control Daemon is a light-weight system level process manager, designed for Embedded Linux based products. The PCD is used for starting the system in a synchronized manner, control and monitor processes and recover from crashes.

Specter - Abstract Arithmetics Library (AAL) is a library coded in native C which is able to do operations with numbers of virtually unlimited length. Specter is targeting mainly cryptography and big integer maths though.