Florian MAZEN - F4FEZ

If we update the firmware for interfacing. I can offer you the choice between upgrading the current commands or writing another protocol intended for M2M ? As explained by Clauss, doing 32 bits multiplication or divide on an old 8 bits mcu in assembly is possible but complicated and consumme a lot of cpu cycle. Instead I can output the PLL step and you do the computation.

Hello, Don't expect too many logic in the commands ;-) To understand the reason of unconstitancy of the command list, it come how the firmware was designed. As the origin we got some radio who nobodies can use for ham activities because on their trunking nature. From some schematics and reverse engineering of the hardware we start to implement a custom firmware, step after step, IO after IO and a big set of eprom. The serial port was required to go deeper in understanding of the chips interconnections....

Hi Claus, I don't know what is you goal. The control software is unfinished for what I remember. I never tested it but, the firmware is supported by hamlib. Look at this page if you find something : https://github.com/Hamlib/Hamlib/wiki/Applications-and-Screen-Shots Regards, Florian F4FEZ

Hi Claus, I don't know what is you goal. The control software is unfinished for what I remember. I never tested it but, the firmware is supported by hamlib. Look at this page if you find something : https://github.com/Hamlib/Hamlib/wiki/Applications-and-Screen-Shots