Activity for Sebastian
-
Sebastian posted a comment on discussion Inertial Head Tracker
No idea what is going wrong. Again something that does not happens on Uno.
-
Hey I am back (was on holidays). I see nothing new is going on. @Doveman Is it closing...
-
It is strange... On the other hand we will see if there will be no issues after longer...
-
Do you mean that always when you turn your head it is locking? There is no synchronization...
-
@Doveman Try to play with INTER change it to 400 or even to 1000 and let me know...
-
For new gy85 go to this post https://sourceforge.net/p/facetracknoir/discussion/iht/thread/eced1cb2/?limit=25&page=9#5b44...
-
One more time just gy85 FTR https://www.dropbox.com/s/ucrsuni98as1yrn/FTR.ZIP?dl...
-
folder: Software/GY-85/FTR/DIY_Headtracker/Config.h and it is not there? You did...
-
Ok first of all I now have one version for Uno and Micro (but still separate for...
-
Ok first of all I now have one version for Uno and Micro. Second of all I switched...
-
Ok first of all I now have one version for Uno and Micro. Second of all I switched...
-
I have to test on my UNO to see what is wrong. I uploaded back orignal version in...
-
Originally there is delay(10) in FTR code but I changed it into nicer form that not...
-
No it is not. Problem is not serial does not work (if we talking about stop of data...
-
No it is not. Problem is not serial does not work (if we talking about stop of data...
-
Well it is not that (at least I think). Serial can have delay if it is not processed...
-
Well Stanislaw I think it is better to report them here as it is project related...
-
I have plenty of old laptops I can put on teamviewer. RD is also option but I do...
-
I see. Well I will check what I can do. I guess TeamViewer should be enough for that?...
-
I see. Well I will check what I can do. I guess TeamViewer should be enough for ...
-
To be honest my part is not better. Programming Arduino is just a hobby for me that...
-
@Stanislaw, I got no influence from headphones (got tracker on top of my head) here...
-
Hey Stanislaw, Well a lot has change. We managed to get drift free tracker with Gy-80...
-
@Sel In UNO you must always use SCL and SDA if you have (Revision 3 and up) or if...
-
I guess difference is coming form here http://arduino.cc/en/Guide/ArduinoLeonardoMicro?from=Guide.ArduinoLeonardo#toc4...
-
I guess difference is coming form here http://arduino.cc/en/Guide/ArduinoLeonardoMicro?from=Guide.ArduinoLeonardo#toc4...
-
I guess difference is coming form here http://arduino.cc/en/Guide/ArduinoLeonardoMicro?from=Guide.ArduinoLeonardo#toc4...
-
Good to hear. Well UNO has diffrent SCL and SDA A4 (SDA), A5 (SCL) If you have lateset...
-
I do not have spring effect on Gy-80 so it is strange that you got (almost same as...
-
@Sel It seems it is not a problem with gy's. Can you make a photo of your arduino...
-
Hey Petter, It is normal that after upload LED does not blink any more as there is...
-
@Sel and Petter, I think I know what may be a problem for you. As Doveman had an...
-
@Sel and Petter, I think I know what may be a problem for you. As Doveman had an...
-
@Sel If you used HeadTrackerGUI.exe from my zip and it does not connect it maybe...
-
@Sel If you used HeadTrackerGUI.exe from my zip and it does not connect it maybe...
-
Hey guys, I dont watch this topic so often now as there was no questions lately but...
-
Good to hear that you make it to work. I personally do not use roll as it is quite...
-
Well with calibration from MultiWii you cant run DIY software as I have no idea what...
-
Actually it is important for calibration where is your front, back up and down......
-
Actually it is important for calibration where is your front, back up and down......
-
Are you aware that you board to GY orientation is 180 degrees rotated (in compare...
-
Do you have same pitch spike in calibration software after axis calibration?
-
Micro has slower CPU so maybe that is why you got the problem (the code for calibration...
-
I put Z to center but It may go either place. I updated http://sourceforge.net/projects/gy80facetrack/files/DIY_headtracker_micro_ver0.1.zip/download...
-
Well I did instal visual studio just to make update as file from forum does not work...
-
Hey Doveman, Well it does not matter if you use A4/A5 or D2 and D3. Also if my modified...
-
Hey Doveman, Well it does not matter if you use A4/A5 or D2 and D3. Also if my modified...
-
Hey Doveman, Well it does not matter if you use A4/A5 or D2 and D3. Also if my modified...
-
Hey Doveman, Well it does not matter if you use A4/A5 or D2 and D3. Also if my modified...
-
Hey Doveman, Should be possible. It does not look complicated. Yes you would need...
-
First of all I fixed basic issue with MultiWii some time ago (not activating after...
-
Hey, @Jeff my plan is to do everything in one software you will be just choosing...
-
You were right. It is defintly a winner. Just tested last night on war thunder at...
-
I do not think there was any update for Gy-85 (in GY80). Was it?
-
Not yet. But that is what I am planning to do.
-
Hello, Good to hear that Jeff. I just updated GY-80 http://sourceforge.net/projects/gy80facetrack/files/DIY_headtracker_FTR_GY80.zip/download...
-
Hey Jeff, You are right that to many information while trying to calibrate will hang...
-
I just did uploaded v0.1 based on Multiwii project http://sourceforge.net/projects/gy80facetrack/files/FTR%20v0.2.zip/download...
-
BTW I found a issue with FTR based on multiWII after disconnection. Sensor initialization...
-
BTW I found a issue with FTR based on multiWII after disconnection. Sensor initialization...
-
Hey Jeff, You can try DIY_headtracker_FTR.zip from https://sourceforge.net/projects/gy80facetrack/files/...
-
Yes that what I meant. I saw quite fast reaction on changes so I wanted to compare...
-
Hey, Sel and Jeff I am pretty sure it is something about storing that it was calibrated...
-
BTW board orientation in calib software (its from their FAQ): How should be the sensor...
-
Hello @Sel and Jeff, I might need to check on it. It is probably something with eeprom...
-
Hey Sel, Glad I could help. But it is strange you need to have 45 degrees. Mine is...
-
Hey Sel, First make sure you have board in proper position (if you have board upside...
-
Hello Furax, Jeff, Sel and Roy, Sorry for late answers but I have lot of work lately....
-
Hello Jeff and Furax, Sorry I was busy last week. I got GY-521 which can be connected...
-
Hello Jeff and Furax, Sorry I was busy last week. I got GY-521 which can be connected...
-
Hello Jeff and Furax, Sorry I was busy last week. I got GY-521 which can be connected...
-
Hello, Look again. They only say they are using 9 DOF IMU. They does not say what...
-
I just did uploaded v0.1 based on Multiwii project http://sourceforge.net/projects/gy80facetrack/files/FTR%20v0.1.ZIP/download...
-
I just did uploaded v0.1 based on Multiwii project http://sourceforge.net/projects/gy80facetrack/files/FTR%20v0.1.ZIP/download...
-
Sorry it is taking so long but I switch engine to one used by Multiwii project. I...
-
Hey Sel, I did found what you are talking about. I added some filter for Yaw from...
-
@Jeff Glad that you found problem. @Petter Sorry I do not have such problems. I used...
-
@Jeff Glad that you found problem. @Petter Sorry I do not have such problems. I used...
-
Yes it is. You may try to calibrate compass then. Try to calib acc first as it easy...
-
Hey Sel, I hope you downloaded everything in zip (easiest) http://sourceforge.net/projects/gy80facetrack/files/AHRS_9DOF_arduino.zip/download...
-
Hello Jeff, I got 2.07 but it is strange that it does not work as I am using 2.10...
-
Hello Jeff, I got 2.07 but it is strange that it does not work as I am using 2.10...
-
@Sel You have arduino Pro Micro, yes? According to this page https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide/hardware-overview-pro-micro...
-
@timbow Hard to say what is going on. Describe what kind of hardware you are using....
-
@timbow Hard to say what is going on. Describe what kind of hardware you are using....
-
Hello, Sel, If you increase first correction_z=0.0001 it will be also centering all...
-
Hello, Sel, I belive it should work with Gy-80. Those guys connected it http://multiwii.org/gy-80-chinese-10dof-and-arduino-pro-mini-hooking-and-testing/...
-
Hello, Sel, I belive it should work with Gy-80. Those guys connected it http://multiwii.org/gy-80-chinese-10dof-and-arduino-pro-mini-hooking-and-testing/...
-
Hello, Sel, I belive it should work with Gy-80. Those guys connected it http://multiwii.org/gy-80-chinese-10dof-and-arduino-pro-mini-hooking-and-testing/...
-
Hello, I did update two files for gy-80. I made angle correction so values will be...
-
Hello, I did update two files for gy-80. I made angle correction so values will be...
-
Hello, I did update two files for gy-80. I made angle correction so values will be...
-
Hello, First of all Gy-85 has magnetometer so yes you can eliminate the drift by...
-
Hey Adolfo, Nice job on you board. About ultrasonic sensor it may work but only for...
1