Activity for Toby Gardner
-
Toby Gardner posted a comment on discussion Help
Well after checking the log - I had uncommected the wrong line - Doh I did this line - # /dev/ttyACM0 # general: USB modem 0 What i needed to do was this- # set ttyport = /dev/ttyACM1 but change the port to 0 Thank you for the help :-)
-
Hi Ed Ive done the modem manager alredy as that caused problems with the last one, I'll have a look in the log file shortly. Thank you
-
Hi, Ive been running NCID for a couple of years now and all been great, My old ESXI server is so old they have dropped support for it so Ive got a new (To me) Dell R710 with ESXi6.7 Ive installed lubuntu as virtual machine (Like the old one) Followed the install instructions I get an error when trying to start the program ncidd.service - Network Caller ID server Loaded: loaded (/lib/systemd/system/ncidd.service; disabled; vendor preset Active: failed (Result: exit-code) since Thu 2019-11-28 09:44:10...
-
Disabled the modem manager and now NCID runs on startup, Thank you for the tip Ed Now onto the upgade 1.7 to 1.10.1 and geting the alias sorted out.
-
The Modem is Zoom 3095 USB. Ive just checked and modem manager is running. ModemManager.service - Modem Manager Loaded: loaded (/lib/systemd/system/ModemManager.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-08-01 07:27:41 BST; 6 days ago Main PID: 548 (ModemManager) Tasks: 3 (limit: 1131) CGroup: /system.slice/ModemManager.service └─548 /usr/sbin/ModemManager --filter-policy=strict Aug 01 07:27:26 ncid-virtual-machine systemd[1]: Starting Modem Manager... Aug 01...
-
Thank you for the help, I tried to set it to start on boot but it wouldnt work, Using terminal window using ncidd -Dv3 This showed that it cant find the modem unless you wait for about a minute after start up as it was running -Dv3 I left it running in teh window and thats when I noticed it got killed at the end off the month. Thanks for the info i'll do some digging and check whats happening I will also try and get it setup as daemon and get that working
-
Hi Ive been running NCID for about 6 months now and works very well thank you, The only problem I have is every month NCID gets killed and I have to restart the machine - See Screenshot NCID runs on a Lubuntu virtual machine (with 1 CPU and 1Gb ram) - ESXI 5.5 I had never used Virtual Machines or Linux before the install of NCID - so Im still learning The other thing is how to do a bulk add to Alias file? I have about 1500 Phone numbers I would like to add to the alias file, and have them stored...
1