Simone Ferrari

* Updates for version v25.1 (IEMDC25)

Minor updates for ECCE24:

Release for ICEM24 conference

Minor updates for ICIT24 conference and thesis projects

Minor bug fixed and some motor models corrected

Update for ECCE 2023 (v3.7)

Hello Viv, 1) SyR-e uses a parametric description of the geometry. To import a custom geometry, you must modify the FEMM file. Once loaded, you will se the actual simulated geometry with colors. The black lines are still the SyR-e style parametrized geometry, but it is not used for simulation 2) increase the number of points in speed and torque (e.g. use 51 points or more on each dimension) 3) I am not sure to understand your problem. If you are referring for the torque function of the speed, accounting...

Hello Viv, 1) the rotor speed in the simulation tab affect just the iron loss computation and the structural analysis. The average torque is the output torque at the selected operating point (current amplitude and angle from d-axis), iron loss (stator and rotor) 2) The rotor iron loss are computed together with the stator iron loss. Be careful about the rotor angular excursion (180 or 360 degrees) and the number of rotor positions to be simulated (set a step of few degrees) 3) the voltage is set...