Detlef Paschke

Hi there, this problem still seems to exist. Megactl shows a faulty BBU although everything is OK. root@Proxmox:~# megasasctl a0 LSI 2108 MegaRAID encl:1 ldrv:1 batt:FAULT, low voltage a0d0 7446GiB RAID 5 1x5 optimal a0e252s0 1863GiB a0d0 online a0e252s1 1863GiB a0d0 online a0e252s2 1863GiB a0d0 online a0e252s3 1863GiB a0d0 online a0e252s4 1863GiB a0d0 online root@Proxmox:~# megaclisas-status -- Controller information -- -- ID | H/W Model | RAM | Temp | BBU | Firmware c0 | LSI 2108 MegaRAID | 512MB...

Hi, I wish a small update. Only * .vcf files are available for selection as Processing setting file. Under Win10 * .vcf is a contact file and Vdub (Vdub2 anyway) uses * .vdscript for a longer time as a processing setting file. A simple. In the file selection makes it possible to use this file as well. Best regards

Hello, I have never seen the surface of the native FFMpeg Xvid encoder, but the bit rate setting is fine with me. I do not change more with the Xvid or DivX codec also. Settings such as cropping or ratio I do with Virtualdub filters. Only if I encode videos that have a resolution greater than 720 * X, I have to change the profile from "Home" to "HD 720" on Xvid or DivX. If that is not necessary with the native FFMpeg Xvid encoder, then I only need to set the bitrate. Sometimes even 2-pass encoding,...

MPEG-4, Xvid, DivX with FFMpeg

Okay thanks anyway. Best regards

Multipass in one step

Hello, Thank you for the tip, but I already know this filter and can not use it. On the one hand, this filter is not suitable for Vdub x64, but far worse is that this filter does not apply formatting of saa files. As you can read on the page, this is also known since 2006. many Greetings Detlef Paschke

Hello, Unfortunately, it is usually the time available that is the problem. Possibly. it will work later. many Greetings Detlef Paschke