Rick Wills

Quite, this is what is puzzling me. I will carry out some further tests. On Sat, 3 Apr 2021, 18:22 Laurent Schwartz, eleandar@users.sourceforge.net wrote: Sorry to insist but how can you have an error message about pulseaudio in jack if pulseaudio bridge is not activated ? (I don't understand). Jamulus and Jack https://sourceforge.net/p/jamulus-os/discussion/v2/thread/b8fb3555c1/?limit=25#1316/d23e/006d/60d8/39c8/bf92 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/jamulus-os/discussion/v2/...

Hi Laurent, many thanks for your suggestions, but I am still suffering the same issues. I am considering a hardware issue here and do have an alternate motherboard that I can try. Regards, Rick. On Fri, 2 Apr 2021, 18:10 Laurent Schwartz, eleandar@users.sourceforge.net wrote: if using ubuntu studio controls doesn't work for you , then please try the following command lines to deactivate pulseaudio bridge with jack (CTRL+ALT+t to open a terminal): pactl unload-module module-jack-sink;pactl unload-module...

Hi Laurent, my pc is only about 4 years old (quad core cpu 8gig ram). I tried your suggestion, no change. Like I said originally, on previous versions of Jamulus, I didn't suffer this problem and the hardware hasn't changed. Regards, Rick. On Fri, 2 Apr 2021, 10:47 Laurent Schwartz, eleandar@users.sourceforge.net wrote: Hello Rick, It seems Pulseaudio is causing the error message. If you haven't got a modern PC then you should consider the following : Extract from WIKI: Audio optimisation If you...

Advice please on this subject: I am running Jamulus OS from hard disk ok, but am having issues with jack and Jamulus. Using the suggested settings for Jamulus, jack gives countless Xruns, making audio impossible to listen to (cracks, pops, dropouts). If i increase the frames/period setting from 128 to 1024 i have clear audio but a delay time within jamulus of 70mS or more making it unusable. I started using jamulus last summer, running with Ubuntu Studio and did not have this problem.....any ideas??...