ravi posted a comment on ticket #238

Hello Sir i havn't received any response from yourside regarding the above error ..so i thought of rebuilding the entire openocd 0.10.0 .after that i nhave ended up with make error as follows. src/jtag/drivers/presto.c: In function ‘presto_open_libftdi’: src/jtag/drivers/presto.c:164:2: error: ‘ftdi_usb_purge_buffers’ is deprecated (declared at /usr/include/libftdi1/ftdi.h:565) [-Werror=deprecated-declarations] if (ftdi_usb_purge_buffers(&presto->ftdic) < 0) { ^ src/jtag/drivers/presto.c:178:3: error:...

ravi posted a comment on ticket #238

Hello Sir i have added ----->source [find board/atmel_saml21_xplained_pro.cfg] in configuration file ( " at91samdXX.cfg " ) instead of ---->source [find target/swj-dp.tcl] so that i can select the device directly from config file...but here im getting the below error Warn : Interface already configured, ignoring interface/cmsis-dap.cfg:7: Error: in procedure 'script' at file "embedded:startup.tcl", line 63 at file "target/at91samdXX.cfg", line 8 at file "board/atmel_saml21_xplained_pro.cfg", line...

ravi modified a comment on ticket #238

ravi modified a comment on ticket #238

ravi posted a comment on ticket #238

k sir thank you for the information..Actually we are using Atmel ICE ,can i use this for Hardware debugging..? If yes give me some idea how to do hardware debugging. Below is the reply i got from Tom.where it is mentioned that it also valid for SAML, SAMR and SAMC series. "The first line of target config says: samdXX devices only support SWD transports. This is valid also for SAML, SAMR and SAMC series. And your log says: Info : auto-selecting first available session transport "jtag". To override...

ravi posted a comment on ticket #238

ok sir thank you for the information..Actually we are using Atmel ICE ,can i use this for Hardware debugging..? If yes give me some idea how to do hardware debugging. On Tue, May 28, 2019 at 2:01 PM Andreas Fritiofson nattgris@users.sourceforge.net wrote: On Tue, May 28, 2019 at 9:52 AM ravi via OpenOCD-devel openocd-devel@lists.sourceforge.net %0Dopenocd-devel@lists.sourceforge.net wrote: Hello i haven't received any response from your side regarding my query about openocd...please help me out get...

ravi posted a comment on ticket #238

Hello i haven't received any response from your side regarding my query about openocd...please help me out get out of this issue.

ravi posted a comment on ticket #238

hello please help me out to solve this problem sir. On Mon, May 27, 2019 at 11:40 AM ravi ravikiran16218@users.sourceforge.net wrote: sorry i didnt get u On Mon, May 27, 2019 at 11:39 AM ravi ravikiran16218@users.sourceforge.net wrote: so whats the conclusion now,... Y im not getting access for the board On Mon, May 27, 2019 at 11:37 AM ravi ravikiran16218@users.sourceforge.net wrote: yeah --> "openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" ----------nd...

ravi posted a comment on ticket #238

sorry i didnt get u On Mon, May 27, 2019 at 11:39 AM ravi ravikiran16218@users.sourceforge.net wrote: so whats the conclusion now,... Y im not getting access for the board On Mon, May 27, 2019 at 11:37 AM ravi ravikiran16218@users.sourceforge.net wrote: yeah --> "openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" ----------nd i tried this too--> "openocd -f interface/ftdi/ngxtech.cfg -f target/at91samdXX.cfg " On Mon, May 27, 2019 at 11:35 AM ravi ravikiran16218@users.sourceforge.net...

ravi posted a comment on ticket #238

so whats the conclusion now,... Y im not getting access for the board On Mon, May 27, 2019 at 11:37 AM ravi ravikiran16218@users.sourceforge.net wrote: yeah --> "openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" ----------nd i tried this too--> "openocd -f interface/ftdi/ngxtech.cfg -f target/at91samdXX.cfg " On Mon, May 27, 2019 at 11:35 AM ravi ravikiran16218@users.sourceforge.net wrote: Even we are using sysresetreq in place of srst. please do check...

ravi posted a comment on ticket #238

yeah --> "openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" ----------nd i tried this too--> "openocd -f interface/ftdi/ngxtech.cfg -f target/at91samdXX.cfg " On Mon, May 27, 2019 at 11:35 AM ravi ravikiran16218@users.sourceforge.net wrote: Even we are using sysresetreq in place of srst. please do check the below configuration file. On Mon, May 27, 2019 at 11:29 AM ravi ravikiran16218@users.sourceforge.net wrote: Hello Sir even after using this command...

ravi posted a comment on ticket #238

Even we are using sysresetreq in place of srst. please do check the below configuration file. On Mon, May 27, 2019 at 11:29 AM ravi ravikiran16218@users.sourceforge.net wrote: Hello Sir even after using this command -->"openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" im getting the same error.. Error: JTAG scan chain interrogation failed: all zeroes Error: Check JTAG interface, timings, target power, etc. Error: Trying to use configured scan chain anyway......

ravi posted a comment on ticket #238

Hello Sir even after using this command -->"openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg" im getting the same error.. Error: JTAG scan chain interrogation failed: all zeroes Error: Check JTAG interface, timings, target power, etc. Error: Trying to use configured scan chain anyway... Error: at91samd.cpu: IR capture error; saw 0x00 not 0x01 Warn : Bypassing JTAG setup events due to errors Error: Invalid ACK (0) in DAP response Error: Invalid ACK (0) in...

ravi posted a comment on ticket #238

But it is working with one of our other board sam5d36Xplained not with samal21 board. On Fri, May 24, 2019 at 4:51 PM ravi kiran ravikiran16218@gmail.com wrote: thanks for the quick response.... But still im getting the same error after using the below script --> openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg On Fri, May 24, 2019 at 4:08 PM Tom tom_van@users.sourceforge.net wrote: The first line of target config says: samdXX devices only support SWD transports....

ravi posted a comment on ticket #238

thanks for the quick response.... But still im getting the same error after using the below script --> openocd -f interface/ftdi/ngxtech.cfg -c 'gdb_flash_program enable' -f target/at91samdXX.cfg On Fri, May 24, 2019 at 4:08 PM Tom tom_van@users.sourceforge.net wrote: The first line of target config says: samdXX devices only support SWD transports. This is valid also for SAML, SAMR and SAMC series. And your log says: Info : auto-selecting first available session transport "jtag". To override use...

ravi created ticket #238

Atmel at91saml21j18b board configuration error with Jtag connectivity Through Openocd Server.