Erik Andresen

Fixed same error on the uncoupler track.

I think there is an error in the Curve Powerfeed Track (#72) under 'P' which according to the documentation is "define the Paths through the turnout, the numbers specify the track segments, numbered from 1" it had a '2'. I believe it must be '1'.

I don't know what they did at the link I based my first version of the curved turnout out. I don't have a real 4/5 (24°) curve, so I used the 30° one. Attached are three files: - Photo real setup - Modified _TrixTest 5.1.2a.xtc - Layout with my latest dimension I think my current version is pretty close.

Hi, a few things: - which link are you referring to? - opening your test file can take a while, my versions from debian seems to be too old so I'll have to compile a new one from source. - What version did you use as a base? The numbers on the curved turnout doesn't seem to match mine from the 16.02.2021. - How can we remove the V 26 test engine from your version?

Sorry, I still was not happy with the dimension of the curved turnout. So I scanned one and took the dimensions from there. Sadly the documented radius R1/R2 is not correct.

Yes, many thanks. I have removed the carpart and fixed the curved turnout (Original dimensions from internet sources, this fixed one is measured by hand).

cool, I have measured the dimensions and have painted it in freecad (attached). How can I add them to the turnouts?

The file I got the dimensions from is attached, sorry its only in German. The curved Turnout in the documentation is apparently wrong so I used the information from this link (also German): http://www.altemodellbahnen.de/t9122f8-Trix-Express-Bogenweichen-und-Wintrack.html#msg177817