Activity for Nerius Anthony Landys
-
Nerius Anthony Landys committed [r8488] on Code
556851.
-
This change to web/index.html has been sitting around, uncommitted. It's
-
Adding crush washer and outer washer for minor pivot. Also adding inbus.
-
Adjusting the minor pivot screw thread and chamfer angle.
-
Adding the minor pivot screws for red cross.
-
Renaming clearance/red_and_green.py to clearance/red_and_green_xsect.py and
-
Using a 'base_cylinder' flag to solve OCCT issues.
-
Finalizing the red cross minor pivot threads and chamfers.
-
Finding a solution to problem with minor pivot threads. I think the rotateY()
-
Adding m13x1p5_thread().
-
Adding the large radius fillet between globe & major cylinder, in red cross.
-
Getting the minor pivot screw chamfers to work, on red cross.
-
Adding m14x1p5_thread(). The debug effort was a false alarm.
-
Making progress on the pivot screw chamfers, on red cross.
-
Adding a TODO with something I need to debug.
-
Adding m15x1p5_thread().
-
Making some progress on the red cross minor pin.
-
Making progress on red cross, w.r.t. threaded holes.
-
Working on remaining tidbits in red cross.
-
Starting to define the red cross major pivot.
-
Decreasing backlash.
-
Adding the white yoke gear fragment screws.
-
Moving seam away from slot on white yoke.
-
Slot and screw holes in white yoke.
-
Adding the knob to gear fragment.
-
Adding _white_crown_gear_slot_subtrahend(), not using yet.
-
Finalized white yoke gear fragment, excluding slot.
-
Making a bit of progress on screw hole threads.
-
Starting to add white yoke gear fragment screws.
-
Adding m8_flat_head_screw().
-
Simplifying white yoke gear fragment code (in gimbalcv-proto/) slightly by
-
Almost finished with the white yoke gear fragment.
-
Removing a comment that is no longer relevant.
-
Making progress on white yoke gear fragment.
-
Making progress on the white yoke gear fragment.
-
Starting work on white yoke gear fragment.
-
Adding quaternion-frt/clearance/green_inside_blue.py.
-
Adding the green shaft incidence limiter.
-
Clearance cone for blue cage.
-
White yoke clearance cone.
-
Adding some assembly bore stuff to white yoke.
-
Minor adjustments in white yoke pivot bearing.
-
Making major progress on the white yoke pivot bearings.
-
Working on white yoke pivot bearings.
-
Adding clearance/white_yoke_pivot_bearing.py.
-
Work on white yoke pivot bearing outer races.
-
Starting to do work on the white yoke pivot bearing outer race.
-
Simplifying 'cut_box' by using mirrorY() operation.
-
Making some progress on white yoke.
-
Continuing with progress on white yoke.
-
Starting work on white yoke.
-
Adding main pivot outer rollers.
-
Adding inbus for outer main pivot screw.
-
Doing some work on the outer lip of main pivot screw.
-
Adding some tentative constants related to blue cage main pivot bearing.
-
Adding inbus interface to main pivot inner pivots.
-
Working on blue_cage_main_pivot_pin_outers().
-
Starting work on blue_cage_main_pivot_pin_inners().
-
Adding a newline for clarity.
-
Adding the blue cage main pivot seats.
-
Using 'xsect_external' in place of 'chop_bottom' in blue cage. Defining
-
Defining the blue cage inner plane for orange slot direction.
-
Adding 'mm_input_output_shaft_end_bevel' for green eyelet.
-
Cutting the clearance w/ red cross, into green eyelet.
-
Finalizing the tooth counts on gears.
-
Adding clearance for red cross on orange slot.
-
Starting work on the entry bore in blue cage.
-
Changing the gear tooth counts again. "Keep teeth" set to 8.
-
Adding _orange_slot_shaft_clear_subtrahend().
-
Change gear tooth counts & add _orange_slot_easy_eyelet_entry_subtrahend().
-
Adding pivot hole to orange slot.
-
Fixing/implementing _blue_cage_entry_intersector_x().
-
Improving _orange_slot_guide_cyl_subtrahend().
-
Starting work on _blue_cage_entry_intersector_x().
-
Making some progress on the orange slot.
-
Adjusting 'omit_pivot_end_chamfer' on blue cage pinion pivot screw, setting to
-
Adding 'mm_blue_cage_inner_spherical_fillet_r_top'.
-
Fixing a spelling error: 'inbis' --> 'inbus'.
-
Working on the mating interface between purple pinion and blue cage.
-
Blue cage hole punch.
-
Starting work on the pinion gear pivot screw.
-
Working on the blue cage / purple pinion interface.
-
Defining the 'cut_box'.
-
Simplifying definition of 'chop_side'.
-
Making progress on the blue cage.
-
Starting work on blue cage.
-
Fiddling with the purple pinion bearing some more. Only have shoulders in one
-
Making further progress on the purple pinion bearing inner race.
-
Carving out the inner spherical on inner race.
-
Beginning work on purple pinion inner race.
-
Making a few tweaks to the purple pinion.
-
Making some more progress on purple pinion bearing.
-
Fiddling with the rolling elements in purple pinion.
-
Making progress on the purple pinion rolling elements.
-
Finishing the major contours of purple pinion.
-
Making progress on the purple pinion.
-
Starting work on purple pinion.
-
Making progress on orange slot.
-
Making progress on orange slot.
-
Starting work on orange slot.
1 >
