Marcio Marchini

Hi Joao, I have repeated the steps multiple times, from the start, over 3 or 4 days. I remove the drive from the array, copy the partition table from the good drive, etc. Basically I Follow the wiki steps. I am travelling now so I am typing this particular email from memory. I recall a “and if your drive was formatted with Alt-F you can skip to step F” near the end. It always looks like it is going to work. If I recall properly it prints something like “synchronizing” or a similar word when I add...

ALT-F 1.0 sdb2/Examine: /dev/sdb2: Magic : a92b4efc Version : 1.0 Feature Map : 0x1 Array UUID : 00b69b0a:6bc129ea:ebcb9df8:5818936f Name : dlink-raid2:0 (local to host dlink-raid2) Creation Time : Sun Jun 25 12:06:04 2017 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 7812128160 (3725.11 GiB 3999.81 GB) Array Size : 7812128160 (3725.11 GiB 3999.81 GB) Super Offset : 7812128416 sectors State : active Device UUID : f761d1e5:3640d850:6d03a3ec:b98363e8 Internal Bitmap : -16 sectors from superblock...

RAD1 rebuild instructions do not work

Please add SMB fruit support for TimeMachine on SMB

For the record, I got a local person to repair it for me.

One gotcha: when changing values, one must delete the .sparsebundle file first. Otherwise it will reuse the one previously created, with the previous values, and new values will seem to have no effect.

3500000 seems to do it. Let's see. But notice how the input field is not very wide (4 chars), making it hard to enter such large numbers.

"3500 g" also failed. It says there's 118GB of 499GB.