Laszlo Balogh

Hi Giuseppe! Thank you very much for your big help, and support you provided during all of my questions. But i decided to go back to Windows, as uploading to RMOB site is not successed. In Windows the SDR, Spectrumlab, and Colorgramm softwares do all what i need, also i have again hits, so everything is working fine here. Originally i wanted to save some power, because my latop consumed about 45 Wh, and also had malfunctions with it. So i thought that i can achieve the same with an RPi (it consumes...

Okay, so the last night the system was running in periodic mode. I got about 600 hits, but found only a few, where about 143.044MHz there is small white line. All of them are at freq 143.044. See attached picture.

Is that so ok? What should i check after periodic run is finished? I read the documents, but not really clear what and how to do.

Does not le me start it...

I set to the frequency of an FM radio station, and you can see its ok, receiving. So the problem is maybe the settings that it does not capture any meteor hits.

Something is worng. No hits since i started echoes. :( Thats impossible. csv files are empty (only header is present), no png-s, etc. Dongle and antenna is ok, as i got hits every day a lot with that on Windows through SDR and colorgramme.

MaybePeak Upper Treshold and Peak Lower Treshold settings could help? It was 80% and 50%. Now i set them to 50% and 10%. We will see. Or what should i check?

Ok symlinking the folder did the trick, thanks! Its working.