Maximo Barawid Jr.

I thought I have AX.25 stack installed. I edited /etc/ax25/axports; vhfp DU2UXH-2 9600 255 2 VHF Packet 1200 bps I did also run kissattach: $ sudo kissattach /dev/pts/2 vhfp AX.25 port vhfp bound to device ax0 $ sudo kissparms -p radio -t 100 -s 100 -r 25 Running direwolf: $ direwolf -t 0 -p Dire Wolf DEVELOPMENT version 1.7 E (Jun 14 2022) Includes optional support for: hamlib cm108-ptt Reading config file direwolf.conf Audio input device for receive: stdin (channel 0) Audio out device for transmit:...

I would recommend to join the direwolf@groups.io email list at https://github.com/wb2osz/direwolf where myself and others can better help you and stay on topic. In that post, please mention how your Linux computer is connected to your IC-7100, etc. Thanks David. So.. what you want to do is run: git clone git://git.code.sf.net/p/linpac/linpac linpac cd linpac autoreconf --install ./configure Ok, let me try that. Thanks again.

Update: Looks like I got the linpac installed and working. How did I do it? Well, I followed different sites on installing linpac on raspberry pi until I got what I need to install BEFORE compiling linpac 0.29, or even 0.28. Having said that, I am still having problems keying my IC-7100. I am using Hamlib for rig control (not sure if I need it but as I said, I followed some instruction on other site), Direwolf as a software TNC, and Linpac. It looks like Direwolf is not used as I don't see any activity...

Ok, I think I am getting there. It's trial and error process. So bear with me. Trying to learn. Max

Ok. I have read the README many times and, I did the following: pi@linpac:~$ git clone https://github.com/ve7fet/linuxax25.git. Then, pi@linpac:~/Downloads $ sudo apt install libax25 ax25-apps libncurses5-dev perl That went ok. Then, install of automake autoconf - done. Then, sudo apt-get install libtool libtoolize autoreconf --install pi@linpac:~/Downloads/linuxax25 $ autoreconf --install autoreconf: 'configure.ac' or 'configure.in' is required Question, am I installing only dependencies? Where...

Hi. Thank you for the reply. It's past 9PM here and I will try it tomorrow and update you. Max

I am running Buster on a Raspberry pi 3B and trying to install linpac-0.28. Here is where it stops after ./configure. pi@bagiw:~/Downloads/linpac-0.28 $ ./configure checking build system type... armv7l-unknown-linux-gnueabi checking host system type... armv7l-unknown-linux-gnueabi checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking...