Testing Example Vehicule Plugin
Hello Pascal, which microphone did you build? There is a potentiometer on the electret microphone board that can adjust the gain. Try to turn the pot at its maximum (or minimum) to get max or min gain.
I would like to invite you to continue this discussion here : https://github.com/introlab/16SoundsUSB/issues/3
It should be compatible with both of them. However, we have only used and tested the XTAG3 for development.
Have you tried the firmware here : https://github.com/introlab/16SoundsUSB/releases ?
Our new 16SoundsUSB 16 inputs sound card design is available on github : https://github.com/introlab/16SoundsUSB. Tell us what you think!
Good news!
Robert, Can you file a bug report / issue on the github project : https://github.com/introlab/manyears/issues...
Roman, I do not have these warnings on OSX. Have you tried to compile the firmware...
Have you tried building the firmware from source in : https://sourceforge.net/p/...
--spi-spec AT25S.spec is mandatory using the file here : https://sourceforge.net/projects/eightsoundsusb/files/3.0.2/...
Firmware
Try to download and flash the new firmware (8SoundsUSB_Firmware_500MHz_3.0.2.xe)...
Sometimes the XTAG adapter fails to discover the devices. Unplug/replug the XTAG...
Ibrahim, I have fixed the link in the previous post. Thanks. Build only from the...
Ibrahim, I have fixed the link in the previous post. Thanks.
Ibrahim, This is great news for the board. You seem to be up and running. I would...
Ibrahim, This is great news for the board. You seem to be up and running. I would...
Discussions about the firmware. Instructions to build the firmware are here : ht...
Discussions about the firmware.
Type "dmesg" for system log.
What is the result of lsusb on Linux? Also can you verify the system log (related...
Ibrahim, Try connecting the device on Mac or Linux. Windows does not have native...
Ibrahim, Try connecting the device on Mac or Linux. Windows does not have native...
Try connecting the device on Mac or Linux. Windows does not have native drivers!
Ibrahim, Maybe you could try some other USB examples from XMOS (HID?) to make sure...
Ibrahim, Maybe you could try some other USB examples from XMOS (HID?) to make sure...
Hi Dominic, I am Ibrahim from XCore forum :) 1) Check if your REFCLK = 13MHz on PIN23...
Firmware
Firmware
Firmware
Firmware
Firmware
Firmware
Firmware
Roman, can you try with this fimware : https://sourceforge.net/projects/eightsou...
Firmware
Roman, I see that our latest discussions have helped. Were you able to compile the...
Roman, just to make sure I understand correctly, are you able to flash the boards...
Firmware
Dear Anonymous, To our knowledge and from the reference design XMOS XS1-L16A-128-C8...
Main_Page
Main_Page
Main_Page
Firmware
Firmware
Firmware
Firmware
Please contact francois.michaud@usherbrooke.ca for a quotation.
Dear Anonymous, To our knowledge and from the reference design XMOS XS1-L16A-128-C8...
Firmware
Firmware
Firmware
Firmware
Firmware
Firmware
Main_Page
Main_Page
Firmware
Firmware
I have added firmware information on the wiki : https://sourceforge.net/p/eightsoundsusb/wiki/Firmware/....
Firmware
Firmware
Firmware
Main_Page
Main_Page
Specifications
Roman, Thank you for your valuable input. You are probably right about the thermal...
Roman, You are right, we changed U13 NCP699SN18 (REV2) --> U13 NCP500SN18T1G (REV3)....
Roman, thank you for your precisions. We will try to find the cause of the problem...
Please see this thread : https://sourceforge.net/p/eightsoundsusb/discussion/gen...
Natnael, great news! By the way, which version of the CPU did you use?
Roman, I am very sorry for the long delay of the answer, I did't quite follow the...
Roman, I am very sorry for the long delay of the answer, I did't quite follow the...
Roman, I am very sorry for the long delay of the answer, I did't quite follow the...
Quentin, I am sorry, I missed this post. you will get an exception in the firmware...
We share our project because we believe it can be useful. More than 50 robotics lab...
First, we are producing the boards with more success than you think. You can have...
Main_Page
Main_Page
Main_Page
Main_Page
Can you be more specific on your request?
Regulatory_Compliance
Regulatory_Compliance
Regulatory_Compliance
Regulatory_Compliance
Regulatory_Compliance
Regulatory_Compliance
The markings on the chips I have in hand is "2PLC 1425". I think the only difference...
The markings on the chips I have is "2PLC 1425"
I don't understand your question. Didn't you find everything you need in the file...
I don't understand your question. Didn't you find everything you need in the file...
Hello Alvin, You assembled the board yourself? A few ideas : 1) R57, R58, R64, R65,...
added OpenGL linking libraries
Fixed for xc30
Artur, You should probably start with the paper: http://link.springer.com/article/10.1007/s10514-012-9316-x#...
NetworkViewer
NetworkViewer
Authors