Lakis

Thank you for your reply. I mean the fax's body, with mixed Latin and Greek words. I tried efix and efax separately -f Full path of font. It doesn't recognize the .pcf.gz, for .pcf gives error unknown format, for ttf gives error ( the font file is bigger than 49kb even if it is much smaller). I decide to make pfds, convert them to tiff and after transmit them.

Please, which is the right syntax for efix option -f so i can change font and use some with greek characters?

Hello The LCD Display module need some rectify. It doesn't print the Latin characters, stays blank, and prints only the custom characters if they are made. All the examples doesn't works too.

I notice and something else eg i start the simulation with capacitance 1e-12 timer1 counts 0x205b (8283), stop simulation change the capacitance to 2e-12 and run it counts 0x46a (1180) big difference. If i exit change the netlist file, save and run the program then it counts 102e (4142) the right value. Note i use the medium range CPSCON0 = 0b10001000 ;

I notice and something else eg i start the simulation with capacitance 1e-12 timer1 counts 0x205b (8283), stop simulation change the capacitance to 2e-12 and run it counts 0x46a (1180) big difference. If i exit change the netlist file, save and run the program then it counts 102e (4142) the right value.

Hello Roy https://www.microchip.com/forums/m725489.aspx?high=capacitive+sensing when you have time look here, he describes the same with pic16lf1939

Hello Using pic12f1822 I have 2 questions 1. Is right to simulate capacitor for Capasitive Sensing using a pulll-up with 0V, 0Ohm and capacity e-11 to e-12? With capacitor 1e-11F Timer1 counts 12420 (12420:0.05=248000) about 248KHz 2. Using Timer1 Gate with source from Timer0 overflow, PIR1 has never interrupt from TMR1GIF but timer1 counts. What i do wrong? void main(void) { init: INTCONbits.GIE = 1 ; //Global interrupts enabled INTCONbits.PEIE = 1 ; //Periferal interrupts enabled INTCONbits.TMR0IE...

Yes it works OK. One problem i had was with lyx Warning: 544: Format not supported. Warning: Quitting. **Error: Conversion script failed ----------------------------------------** /root/Downloads/lakis/gpsim/gpsim-code-r2564-trunk/doc/gpsim.lyx is from a newer version of LyX and the lyx2lyx script failed to convert it. LyX failed to load the following file: /root/Downloads/lakis/gpsim/gpsim-code-r2564-trunk/doc/gpsim.lyx i copied from older version gpsim.lyx to bypass it. Please give a direction...