Klaus-Peter Kuehne

Problem solved! I downloaded the ino.Files again and programed the Arduino one moe time - now it woks! Sorry.....

Hi Robert! Following your previous advise, my rotator worked fine. However, now - being not aware of any changes I made - the rotator does not connect - neither to the WIN-application nor to NINA. I can program the sketch to the Arduino (see picture), I installed the latest CH340 driver (for WIN 11 as well as on an older WIN 10 PC). I attached some screen shots and the log.... You help is very much appreciated. Best Klaus

Hi Robert! Since I’m a bloody beginner in respect to programming Arduino (honestly spoken -I have no idea 😊) I will stick with the USB-connection. I downloaded the Sketch – and it works (almost). However, there is the following issues… I cannot activate the home sensor. In the Windows application it says „true“ and „moving“ even though there is no movement at all. In the Sketch I type „:421#“ and it still tells „$0“ when I check with „:43#“. There is no change in speed no matter what I use (slow,...

Hi Robert. Thank you for your immediate answer. This means that with a Bluetooth connection no change/alteration of the Arduino code/Windows SW would be necessary…. The rotator will work the same as with the USB cable – as discribed in your myDewController pdf (sorry I’m not that comfortable with such Topics…😊) Regarding the PINs for the HC-05….. why not use the Arduino PINs RX0 and TX1 with a resistor divider (1k and 2k Bridge) on TX of the HC-05 Hi Robert. Thank you for your immediate answer. This...

Hi! I already build your MyDewController and I'm thrilled!!!! Since my USB ports are very limited I was happy to connect the dew controller by using the Bluetooth module HC-05 to connect to the PC. Can I also add the HC-05 to the myRotator layout/PCB and run the Arduino/WIN SW - ordo I have to adapt the sketch? Thanks Klaus