Alfonso Morales

Hi Steven, I don't need perform unnatended mode to save image, basically what I need is to save the disk image from PC2 (Windows, Linux, other OS) to PC1 repository (dedicated storage for saving image) using Clonezilla live through network with Ethernet switch without config a samba network, this function in the past it was possible in DRBL ISO live but it seem isn't fully supported in clonezilla live, the idea is to avoid sabe the image to an external hard disk connect to pc2, instead, save through...

Hi Steven, Is there a way to enable the "Select in client" function to be able to save a local image from one pc to another pc? In the past this function it was enabled in the DRBL live ISO but it seems in the Clonezilla live isn't working well. The steps that I used to replicate it is using in terminal with root "DCS" > "All select all the clients" > "Clonezilla-start" > "Expert" > "select-in-client" > server always provides clone mode (clonezilla, local boot, drbl) After select any of the final...

Hi Steven happy new year and sorry for my late reply: I'm using the latest stable Clonezilla live version 2.6.4-10, in the server the full command it looks like the attached image "server", and whehn the ICRC option is used, when I deploy an Windows image to the client the problem is that start to clone the first partition but when finish to start the next partition appears the red message like in the attached image "client" and to avoid this you must press enter on the keyboard so that way it will...

Actually all the AIO can boot in PXE, the issue is that after some seconds that all the clients are in the Clonezilla PXE boot logo only few can proceed to start the deployment process ant the others change to the kernel panic or bypass to the bios setup after being connected on the pxe clonezilla boot logo. I will try to test the 2.6.4-10 or the 20191024 to check if there's a chance that might be this issue is fixed with this newest builds. Alfonso.

I'm sorry for the text, I mean to the ICRC setting "Ignore CRC checking of parclone", that's why I uploaded the example images in the previous post to check the rate difference when is enabled and disabled this setting in expert mode, but the problem is that when the value ICRC is enabled, there is a problem on the unnatended deplo when pass from one partition to another like in the picture "partition issue.jpg" as can be seen in the previous post. It would be better to avoid this issue since enabling...

I'm sorry for the text, I mean to the ICRC setting "Ignore CRC checking of parclone", that's why I uploaded the example images in the previous post to check the rate difference when is enabled and disabled this setting in expert mode, but the problem is that when the value ICRC is enabled, there is a problem on the unnatended deplo when pass from one partition to another like in the picture "partition issue.jpg" as can be seen in the previous post. It would be better to avoid this issue since enabling...

Hi Steven this observation (We have very limited manpower so the drbl live is not actively maintained. It's very old... ) is perfectly understandable. In the case of the AIO models used it comes with 4GB of RAM embedded (EMMC) and the storage it's 64 GB EMMC. The weird thing is that using DRBL this units worked well or using lite server but using less than 32 or 30 becuase if the number of clients is incremented there will be the bugs like the captured one on the logs files. Alfonso

I forgot to mention that in the case of the scenario 2 of the AIO's, using Clonezilla lite server with the release 2.6.3-7 amd64 where only 11 units can be imaged well, but the same 47 AIOs worked well and I was able to deploy the image over all of them using the DRBL live build 2.6.0-7, the only difference is that this build cannot shutdown inmediatly the equipments but once that arrive the status to the final message that says "still tryng" to shutdown on this state all the equipments are already...