Another batch of updates dropped. I guess that's a good thing. I'd still like to update but am unsure how.
I'm in the same boat. Updates stopped some time ago. Although a bunch of security updates just dropped. Anyone have instructions on updating RasPBX?
Not quite your problem but I run raspbx-backup on a network share (yeah not enough room on the system). I found I had to add an "exclude=" phrase to the script for "/net". Otherwise the script would try to backup the entire NFS share and fill up the backup space.
I've been running on a RPi 2 for a couple of years now. A residential use case so I've only seen a couple of calls at one time. But it has worked great.
So I've been using Raspbx for a couple of years now. I see that the general Raspbian distro is on Debian 9. My old Raspbx is on Debian 8. Is there any need to upgrade the base distro? (Whoops, mispelled Raspbian...)
So I've been using Raspbx for a couple of years now. I see that the general Raspbian distro is on Debian 9. My old Raspbx is on Debian 8. Is there any need to upgrade the base distro?
So I've been using Raspbx for a couple of years now. I see that the general Raspian distro is on Debian 9. My old Raspbx is on Debian 8. Is there any need to upgrade the base distro?
I've been using Postfix for years and so installed it on my RasPBX host. The thing I ran into had to do with IPv6 support. IPv6 is enabled in the underlying Debian and Postfix will try to use it even when you don't have your overall network IPv6 enabled. As I recall it sends all traffic to the IPv6 loopback device. There is a setting in the Postfix config file to disable IPv6.
raspbx-backup does not work with autofs mounted shares. First during backups the autofs mountpoint, /net, is not excluded. This is fixed by adding the exclusion to the rsync invocation. Second, the logic for creating a new backup file or using an existing file fails over an NFS share. Commenting out this block fixes this: #if [ ! -z "$IMAGE_FILE" ] #then # do_backup # exit 0 #fi
raspbx-backup does not work with autofs mounted shares. First during backups the autofs mountpoint, /net, is not excluded. This is fixed by adding the exclusion to the rsync invocation. Second, the logic for creating a new back or using an existing file fails over an NFS share. Commenting out this block fixes this: #if [ ! -z "$IMAGE_FILE" ] #then # do_backup # exit 0 #fi
I have been working with raspbx-backup over autofs. This has required a couple of changes to the script. First, the mount point for autofs, /net, is not recognized by the script. Adding it to the rsync invocation solves this problem: rsync -aDH --partial --numeric-ids --delete --force --exclude '/dev' --exclude '/media' --exclude '/mnt' --exclude '/proc' --exclude '/run' --exclude '/sys' --exclude '/tmp' --exclude 'lost\+found' --exclude '/etc/udev/rules.d/70-persistent-net.rules' --exclude '/net'...
Awesome. That is a really good use scenario showing the power of the Pi. To go back to the thread subject, I used the same micro-SD for about a year an a half. Not expensive, bought at a local pharmacy. Rock solid. I have since implemented raspbx-backup (has issues with autofs) and bought a couple more $10 cards from Amazon. So now if there is a failure, I can just pop in a new card.
I just ran fstrim several times: root@raspbx:~# fstrim -v / /: 431.6 MiB (452530176 bytes) trimmed root@raspbx:~# fstrim -v / /: 48 MiB (50356224 bytes) trimmed root@raspbx:~# fstrim -v / /: 0 B (0 bytes) trimmed root@raspbx:~# fstrim -v / /: 48 MiB (50356224 bytes) trimmed Each had different results. So it looks like something is getting done.
A bit more research on trim. So do not mount with discard and instead occassionally run fstrim via the provided timer: sudo cp /usr/share/doc/util-linux/examples/fstrim.service /etc/systemd/system sudo cp /usr/share/doc/util-linux/examples/fstrim.timer /etc/systemd/system sudo systemctl enable fstrim.timer sudo systemctl start fstrim.timer
I notice that RasPBX does not enable discard on the file system. Is this recommended? Wouldn't it be a good thing on a uSD card?
Oh yay. Looks like my Asterisk was upgraded to 13.11.2 as part of my raspbx-upgrade...
I got hit by this. Thanks for the a2enmod work-around. You say run raspbx-upgrade...
Sorry for the delay in responding. Sourceforge doesn't seem to have an email notification...
Sorry for the delay in responding. Sourceforge doesn't seem to have an email notification...
You lost me there on your description. 7Z-fm was opening to a list of drives. I tried...
Right, I'm using the built-in backup system to save the config. To be a bit more...
I installed 7zip-64 on a new Win10 machine. I can't seem to open archives or even...
Prompted by the recent discussion of SD cards going bad, Is there a guide somewhere...
Wish there was more traffic here. Ah, well, I do my part. Found this page: Setting...
Now I know this is in-memory swap space. We don't want physical swap to save the...
A bunch. I have no hard numbers for you. That page seems to talk about a Rpi1. The...
A bunch. I have no hard numbers for you. That page seems to talk about a Rpi1. The...
I'm confused. The last time I looked Raspbx did not install swap at all by default....
Sam's points are all correct. Take a look at the wiki page I link to above. My added...
I'll point you to the same page I posted a few days ago RPi Testing And I'm 99% sure...
All I can say is it's been stable for me. I've been running RasPBX for a couple of...
Here's the page I was thinking about: RPi Testing It's from 2012 so I'm pretty sure...
I have two Grandstream 503 FXO/FXS and one 702 2-port FXS. Grandstream also makes...
This is mentioned on the FreePBX wiki: raspbx-upgrade apt-get update amportal stop...
This is mentioned on the FreePBX wiki: raspbx-upgrade apt-get update amportal stop...
Yeah, it's there. I installed it to play with it. Realized it wasn't what I was looking...
All I can say is it's been stable for me. I've been running RasPBX for a couple of...
All I can say is it's been stable for me. I've been running RasPBX for a couple of...
Sorry, a bit of a language issue here. But it sounds as if you are following the...
I just tried installing Parking Lot and it failed. After getting some help, we realized...
I just went through a very difficult and lengthy process getting two HT-503s working...
I just went through a very difficult and lengthy process getting two HT-503s working...
I just went through a very difficult and lengthy process getting my HT-503 working...
A firmware upgrade on the phone seems to have fixed the problem. Grandstream Firmware...
Forgot to update this thread. Looks like a firmware issue. Upgrading to the 1.0.14.100...
In the process of setting up my first RasPbx system using Grandstream GXP2130 phones...
I'm following the instructions here for two HT-503s: Setting Up HT-503s On FreePBX...
I used the parted method as well. Although I did it on an external CentOS 6 host...
Can anyone tell me how to install the open source endpoint manager? EndPointManager...
Can anyone tell me how to install the open source endpoint manager? EndPointManager...
I'm in the process of setting up RasPBX and one of the things I need to do is operate...
I'm in the process of setting up RasPBX and one of the things I need to do is operate...
I'm in the process of setting up RasPBX and one of the things I need to do is operate...
I'm in the process of setting up RasPBX and one of the things I need to do is operate...