J.M. Rivera posted a comment on ticket #5659

Hello, here is the Samsung and Patriot NVME SSD SMART RAW output. Patriot PCIe Gen3 x4 NVMe SSD: sudo smartctl -a /dev/nvme1n1p1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.0-37-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Patriot M.2 P300 512GB Serial Number: P300NDCXXXXXXXXX17 Firmware Version: SN21875 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x3a5a27 Total NVM Capacity: 512,110,190,592...

J.M. Rivera modified a comment on ticket #5659

Hi Jamie, Thanks for the quick fix, I've applied the commit fix manually and I will leave an attached screenshot for reference, I will also provide the SMART output status for two NVME brand drives Gen3x4 at the bottom for further reference. Regards

J.M. Rivera modified a comment on ticket #5659

Hi Jamie, I've applied the commit fix manually and I will leave an attached screenshot for reference, I will also provide the SMART output status for two NVME brand drives Gen3x4 at the bottom for further reference. Regards

J.M. Rivera posted a comment on ticket #5659

Hi Jamie, I've applied the commit fix manually and I will leave an attached screenshot for reference, I will also provide the SMART output status for two NVME drives a Gen3 and a Gen4 for at the bottom for further reference. Regards

J.M. Rivera modified a comment on ticket #5659

Hi Jamie Cameron, I've provided the RAW output of the disk in question, the serial number does not have any space between. Regards

J.M. Rivera posted a comment on ticket #5659

Hi Ilia Ross, I've provided the RAW output of the disk in question from smartctl with the most common used options/flags for reference . Regards

J.M. Rivera posted a comment on ticket #5659

Hi Jamie Cameron, I've provided the RAW output of the disk in question. Regards

J.M. Rivera posted a comment on ticket #5659

@jcameron and @iliaross Thanks for the prompt review of this cosmetic bugs, I will provide the RAW SMART output for this SAS drive for further reference. Output for smartctl -a /dev/da1: smartctl 7.5 2025-04-30 r5714 [FreeBSD 14.3-RELEASE-p7 amd64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: TOSHIBA Product: MG08SDA800A Revision: 0104 Compliance: SPC-4 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Logical...

J.M. Rivera created ticket #5659

SMART Drive Status on SAS Drives

J.M. Rivera committed [r10599] on Code

Requirements for 'pkg' utility (Adds ~10 MB)

J.M. Rivera committed [r10598] on Code

Default to 4k alignment

J.M. Rivera committed [r10597] on Code

ZFS installer update/cosmetic changes

J.M. Rivera committed [r10596] on Code

Make boot files executable

J.M. Rivera committed [r10595] on Code

Re-add new boot files(RELEASE-P5)

J.M. Rivera committed [r10594] on Code

Remove boot files before re-add

J.M. Rivera committed [r10584] on Code

ZFS installer update/cosmetic changes

J.M. Rivera committed [r10570] on Code

Feature: Add Boot Environments web pages

J.M. Rivera committed [r10569] on Code

Feature: Add Boot Environments to dashboard

J.M. Rivera committed [r10386] on Code

Make latest EFI boot files executable

J.M. Rivera committed [r10385] on Code

Add latest EFI boot files(14.3-p2)

J.M. Rivera committed [r10384] on Code

Remove old EFI boot files

J.M. Rivera committed [r10228] on Code

Make previously added EFI files executable

J.M. Rivera committed [r10227] on Code

J.M. Rivera committed [r10226] on Code

Remove old EFI files before re-add

J.M. Rivera committed [r10027] on Code

Add latest EFI files(FBSD-14.1)

J.M. Rivera committed [r10026] on Code

Remove old EFI files before re-add

J.M. Rivera committed [r9953] on Code

Set loader EFI files executable

J.M. Rivera committed [r9952] on Code

Add latest EFI files

J.M. Rivera committed [r9951] on Code

Remove old EFI files before re-add

J.M. Rivera committed [r9944] on Code

Add new efi files

J.M. Rivera committed [r9943] on Code

Remove old efi files

J.M. Rivera committed [r9840] on Code

Fix typo, remove leading slash

J.M. Rivera committed [r9837] on Code

Add missing directories

J.M. Rivera committed [r9826] on Code

Minor adjust for compatibility

J.M. Rivera committed [r9824] on Code

Use full path cmd call(required for embedded)

J.M. Rivera committed [r9823] on Code

Code update for latest changes/features

J.M. Rivera committed [r9822] on Code

Add KEYWORD to geli rcd

J.M. Rivera committed [r9820] on Code

Update for geli rcd file

J.M. Rivera committed [r9818] on Code

Enable esp mount point, update build file

J.M. Rivera committed [r9814] on Code

Minor cleanup, replace spaces by tabs

J.M. Rivera committed [r9813] on Code

Re-add the new EFI boot files/image, update build docs

J.M. Rivera committed [r9812] on Code

Remove boot files before re-add new files

J.M. Rivera committed [r9811] on Code

Update files for latest boot changes

J.M. Rivera posted a comment on ticket #5617

Thanks Ilia for the prompt response, sorry my ignorance in regards this feature maybe I'm a bit old-school already and tough it was just an issue. Thanks for the workaround command, will set the previous behavior and see, and perhaps will set the feature back on and just get used to it. Regards

J.M. Rivera created ticket #5617

Dashboard/Modules window resize issue

J.M. Rivera committed [r9380]

Code improvements for the zfs installer

J.M. Rivera committed [r9374]

Bugfix: protect zroot member disks from being formatted from the webgui

J.M. Rivera committed [r9333]

Add missing variable

J.M. Rivera committed [r9332]

Code consistency improvements

J.M. Rivera committed [r9308]

Properly terminate case structure

J.M. Rivera committed [r9306]

Add the fingerprints file for packet filter

J.M. Rivera committed [r9305]

Let the user edit this variables accordingly

J.M. Rivera committed [r9304]

Add required files for packet filter(PF4) firewall deploy/management(CLI)

J.M. Rivera committed [r9298]

Minor changes for esp mountpoint in zfsinstall(reference code)

J.M. Rivera committed [r9284]

Minor changes for esp creation in zfsinstall

J.M. Rivera committed [r9283]

Add missing code, format esp partition

J.M. Rivera committed [r9280]

Create latest EFI system partition on LiveUSB

J.M. Rivera posted a comment on discussion General Discussion

Hello sorry for late here, the OS support for this simple nut module is mainly freebsd, openbsd, netbsd and experimental -linux, the files that may contain generic Linux configuration for nut are the config--linux under the module directory "/nutmonitor", however the user can manually configure/test different Linux distros as well. Really sorry I'm limited on testing for Linux distribution atm so can't confirm if works as intended on Linux, also as for MonitorOnly the module can be configured just...

J.M. Rivera committed [r9236]

Additional content for zfs encryption feature

J.M. Rivera committed [r9234]

Bugfix: Fix GELI encryption broken in ZFS installer

J.M. Rivera committed [r9233]

Fix path/typo

J.M. Rivera committed [r9232]

Update build files and zfs installer

J.M. Rivera committed [r9231]

Make new EFI files executable

J.M. Rivera committed [r9230]

Re-add latest EFI loaders

J.M. Rivera committed [r9229]

Remove obsolete EFI loaders

J.M. Rivera committed [r9228]

Update EFI images, zfs installer and docs

J.M. Rivera committed [r9055]

Fix for /var/tmp permissions warning

J.M. Rivera posted a comment on ticket #1

Hello, this module is just an update for supporting FreeBSD + Nginx under an optional jail/container, however you can still find the original Nginx Webmin Module created by Justin Hoffman HERE

J.M. Rivera committed [r8552]

Update build files

J.M. Rivera committed [r8493]

Update/improve geli rc, add missing geli rc files

J.M. Rivera committed [r8439]

Make file code cleanup/improvements

J.M. Rivera committed [r8436]

Restore chflags after upgrading from live media

J.M. Rivera committed [r8435]

Create missing directory

J.M. Rivera committed [r8434]

Update files, increase MFSROOT size

J.M. Rivera committed [r8433]

Fix wrong path in make file

J.M. Rivera committed [r8432]

Update ISO efiboot image and build files

J.M. Rivera committed [r8431]

Update build files

J.M. Rivera committed [r8430]

Update and prepare for latest lua boot loader features

J.M. Rivera committed [r8429]

Add support for Embedded/UEFI installs without SWAP/DATA

J.M. Rivera posted a comment on ticket #2

I believe you can use the Preferences.xml as well, as the config check is not tied to an extension IIRC. Regards

J.M. Rivera posted a comment on ticket #2

Hi, this rc file check if for Plex installation verify purposes, however you can try search and point to another Plex related config file(the path may differ per distro) and the module should work. If the Plex module still can't work for you, please let me know your Ubuntu flavor/version so I can have a quick check for. Regards

J.M. Rivera committed [r8081]

ZFS installer changes, be more verbose instead of too strict on errors

J.M. Rivera committed [r8080]

Cleanup, remove obsolete/unused code and minor adjustments

J.M. Rivera committed [r8079]

Ability to upgrade/repair boot environments from LiveMedia

J.M. Rivera committed [r8075]

Minor cosmetic changes

J.M. Rivera committed [r8060]

Add custom boot1.efifat image for backward compatibility, update build files

J.M. Rivera committed [r8059]

Add custom EFI files to mfsroot too, update zfsinstall.sh

J.M. Rivera committed [r7941]

Option to create all release images at once

J.M. Rivera committed [r7938]

Update EFI boot loader files (release 11.4/p6)

J.M. Rivera committed [r7937]

Delete for replacement binaries

J.M. Rivera committed [r7936]

Restored previous EFI files (release 12.2/p2)

J.M. Rivera committed [r7935]

Delete for revert to previous efi files(wrong branch)

J.M. Rivera committed [r7934]

Update EFI boot loader files (release 11.4/p6)

J.M. Rivera committed [r7933]

Delete for replacement binaries

J.M. Rivera committed [r7927]

Adjust rc message

J.M. Rivera committed [r7926]

Wait for platform device/label to be ready

J.M. Rivera committed [r7925]

No need duplicate PATH

J.M. Rivera committed [r7923]

Code changes, update rc

J.M. Rivera committed [r7842]

Loader files and documentation update

J.M. Rivera committed [r7837]

Initial EFI loader files/docs for upcoming 12.2