Activity for Jin Yu
-
Jin Yu committed [221677]
don't hard code HDSK CFD page.
-
configure the GPMC clearly for NAND interface.
-
make sure allowing all the address if only one ...
-
add support for multiple FPGAs.
-
delete debug message.
-
correct FPGA address up to bit 19 for ONM.
-
allow FPGA address up to bit 25 for AMB, and bi...
-
update file fw_env.config when mrv-install.
-
set Marvell PHY m88e1512 to be auto sense coppe...
-
make sure ONM compiles.
-
set the Marvell PHY 1518 in auto sense copper/1...
-
change u-boot default baudrate to be 115200.
-
fix a typo.
-
now definition CONFIG_ETH_NO_100 only effect in...
-
AMB EEPROM first byte is not stable. Need to fi...
-
add CEM board support, Marvell PHY is connected...
-
Support board CEM.
-
fix onm compiler error.
-
support OD-CEM line card.
-
force AMB board eth MAC name to be cpsw0 as ONM.
-
move mrv_fixed_phy_init() to board-mrv.c
-
add new Marvell PHY in the phy driver.
-
add support of MARVELL PHY init in the u-boot.
-
function get_amb_phy_id() is AMB specified func...
-
missing a file.
-
support AMB cards with DDR3 and MARVELL PHY.
-
add command-line command to program the CPU EEP...
-
correct PMC shadow interrupts mask.
-
add new marvell phy support.
-
adjust PMC page shadow interrupts mask.
-
shadow interrupt is CFD version depended.
-
CPLD is ONM only.
-
Bug fix, NMI line is driven by FPGA and CPLD to...
-
add CFD 8121 shadow irq support for GCC.
-
make sure AMB DMA set properly.
-
make sure the amb card DMA access clock is 50M ...
-
make sure the amb card DMA access clock is 50M ...
-
avoid flooding dmesg.
-
support AMB cards, now we have the same source ...
-
support AMB cards, now we have the same source ...
-
support new TI page ID=0x8124 which combines pa...
-
support new TI all in one page CFD ID = 0x8124,...
-
support FPGA watchdog and block the CPU communi...
-
new version for memory testing tool.
-
enable the real memory test to test data bus an...
-
make sure the DMA lock locks the whole DMA ioct...
-
Add amb FPGA DMA synch access support.
-
release amb version to support DMA GPMC synch a...
-
synch DMA access FPGA setup
-
report synch type to be 0 when CPLD is using th...
-
add support for DMA burst access synch FPGA.
-
adjust synch access FPGA timing.
-
shorten the line to about 79 charactors.
-
create device driver for synch burst 16 words a...
-
output synch FPGA area address and size.
-
adjust synch burst access FPGA timing again.
-
add support for both DMA and 4words directly ac...
-
adjust the synch FPGA GPMC registers to support...
-
Merge branch 'onm' of ssh://git.code.sf.net/p/m...
-
change the FPGA synch burst to 16 words.
-
FPGA need one more clock after write access.
-
FPGA need one more clock for write access.
-
add one more clock on the write chip select for...
-
add support for synchronized accessing of FPGA
-
support GPMC or I2C access CPLD based on CPLD v...
-
add shadow interrrupts to deal with splitting t...
-
add amb build and install scripts.
-
add fpga interrupt counters to track interrupts.
-
clear the irq at the initialization.
-
The original initerrupt is handled based on who...
-
count interrupts of each CFD.
-
Change FPGA page address location, the code sup...
-
support FPGA page address start at bit8 or bit10.
-
support FPGA CFD 10bit address and 8bit address.
-
mask all the interrupt bytes.
-
Merge branch 'amb' of /home/git/linux-am33x int...
-
count interrupts of each CFD.
-
new kernel for amb board. mask all the interupt...
-
add shadow interrrupts to deal with splitting t...
-
clear the irq at the initialization.
1
