Activity for Jeff Epler
-
Jeff Epler modified ticket #451
Hostmot2 sserial errors
-
"homed" icons in Axis (and other GUIs)
-
add missing joint pins to inihal
-
add a manpage for gentrivkins
-
update docs about NML commands
-
update motion manpage
-
update INI Configuration documentation
-
make pncconf write ja-compatible ini files
-
make stepconf write ja-compatible ini files
-
I think that the existence of joints mode needs to remain "mostly hidden" by people...
-
We have supported Tcl as a command language for startup hal files for a number of...
-
What sort of spindle would benefit from this feature? We discussed this informally...
-
I will be happy to review any patch to improve this.
-
axis does not accept '.tcl' file for [HAL]POSTGUI_HALFILE
-
Ticket moved from /p/emc/bugs/434/
-
Ticket moved from /p/emc/bugs/435/
-
HAL: pins for `ini.N.*` are exported too late
-
I will be happy to review any patch which improves this situation.
-
unsigned HAL pins/signals/params: wrong type in hal_data_u
-
Fixed in '2.6' since 09cff6b 09cff6b hal: correct typo'd type in private header src/hal/hal_priv.h...
-
Axis warning from tcl8.6
-
Believed fixed by http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5a0272d
-
Debian experimental libtcl8.6=8.6.4+dfsg-1 also does not exhibit this problem. However,...
-
We believe this bug will be fixed in linuxcnc 2.7.
-
Linuxcncrsh stop responding
-
Problem using AXIS together with HALUI
-
Even though the patch causes known problems for users of nml-over-tcp, we have incorporated...
-
I have rebased the original SF#328 patch onto the tip of the LinuxCNC master branch....
-
In my testing, I found that when the last 'SET MODE MDI' is issued, linuxcncrsh's...
-
pid-based 7i76 config from pcw
-
The attached patch seems to resolve the problem for me.
-
Calibration's "save" button doesn't save anything
-
Stepconf is broken in several ways on wheezy
-
In branch jepler/2.6/checkglade, I offer a script which can check for these conflicts...
-
As far as what package to recommend, glade-gnome looks correct for Ubuntu (lucid...
-
This package is not needed to build linuxcnc, and it is not needed to run linuxcnc....
-
Package "glade-gtk2" from Ubuntu Trusty for Debian Wheezy
-
add missing licenses to source files
-
I added GPLv2+ license blocks to all those files, crediting all authors recorded...
1