There are 16 BBC 1 HD EPG entries! You can obviously "Exclude" all but your local region in the EPG Centre.
Thanks I was confused by the Exit Code 10 error that it had not scanned all frequencies when it actually had scanned the frequencies but obviously not for long enough! I think it has been running Freeview scans with that error on the live server for many years!! When started by the NextPVR Web app the Freeview scan produces the xml output file as expected but the Freesat scan does not happen and the scan stops immediately after the Freeview scan finishes! I will look into EPGC_DATA_DIR. However there...
I have been using NextPVR to record both Freeview DVB-T2 channels and Freesat DVB-S2 channels for many years and have been using EPG Collector to produce the Freeview and Freesat EPG data. A couple of years ago I bought a SAT>IP sever but both NextPVR and EPG Collector never saw the SAT>IP tuner. Not until I recently setup a separate test server on a spare computer with a clean install of Windows 10 did I find that both EPG Collector and NextPVR now see the SAT>IP tuner and seem to work like any...
Thanks! Strange but a search for "PSIMemoryShare.dll not found" didn't find anything newer than 2017!! Where is the version that does not need the 2010 C++ Redist as unable to find it? A couple of years ago I reported a problem as EPG Collector did not recognise my SAT>IP tuner so used it elsewhere. Later it turned out that something installed on that server stops anything using the SAT>IP tuner. Luckily I already had a working DVB-S2 and DVBT2 tuner in the server. Unfortunately one of the DVB-S2...
I am setting up a test server to investigate a problem using EPG Collector with a SAT>IP tuner. The live server is still using v31 but have installed v32 on the test server. The SAT>IP tuner is working and finds DVB-S2 Freesat data and have just installed a DVB-T2 tuner but a scan for EPG data crashes with error PSIMemoryShare.dll not found. I have rebooted after installing the DVB-T2. Log file attached. Chris
I am setting up a test server to investigate a problem using EPG Collector with a SAT>IP tuner. The live server is still using v31 but have installed v32 on the test server. The SAT>IP tuner is working and finds DVB-S2 Freesat data and have just installed a DVB-T2 tuner but a scan for EPG data crashes with error PSIMemoryShare.dll not found. I have rebooted after installing the DVB-T2. Log file attached. Chris
Thanks for your help as C++ redist from 2010 cured the problem! Very confusing as the old Windows 10 disk I have been running for almost a year only has redist 2012 version installed. You cannot install the 2010 version if you have 2012 installed so you have to uninstall 2012 install 2010 then reinstall 2012!
Thanks for that as I have not made changes the settings for a while!! Last year I updated to Windows 10 and could not get EPG Collector to work with my SAT>IP tuner but it wasn't important as I had a twin PCIe DVB-S2 tuner. One of those tuners failed recently so needed to start using the SAT>IP tuners. The current Windows 10 boot disk seems to have a problem with SAT>IP as a new install on another disk all software now works including EPG Collector with SAT>IP. However if I enable just the working...
I have been using EPG Collector for many years and this problem has appeared before but cannot remember how I got round it. If I make any changes to the settings I have used for years I get the popup> The DBVB-S Tuning Parameters have not been updated to the selected frequency list. Do you want to update them Select YES but nothing is saved!! I now have clean install of Win 10 and clean install of EPG Collector and I dont use the Freesat ini file I have used for years but let EPG collector create...
The new version did not make any difference. In answer to the question yesterday in the Tuners tab the Digibit sat>ip server is listed. There is a Satip Enabled file. It had Frontend=4 from when I enabled SAT>IP. If I enable SAT>IP with defaults it uses tuner 1. Log is from clean install of the new EPG Collector then Enable SAT>IP then select Freesat!
The Digibit SAT>IP tuner is listed with SAT>IP frontend "Not used". If I Run "Collect EPG Data" it says its using Tuner 1 but does not find a signal but its actually using tuner 4! If I try to set the frontend to tuner 4 this is when the "save" problem starts!
My live system running Windows 8.1 has hardware dvb-s tuners so I am trying to use the sat>ip tuner to get it working on a Windows 10 disk. I uninstalled EPG Collector and deleted the remaining EPG Collector directories. I did clean install of latest version. I selected "Create new collection parameters" then selected "UK Freesat" which created the current setup! Tuners 1&2 are used for live tv via TV Headend on a RPi4 so trying to use one of the unused tuners for tests. I do have a working DVB-T2...
Have been using EPG Collector for many years on Windows 8.1 without a problem. I am now testing it on a clean install of Windows 10 and it refuses to save changes with "Incorrect Data" in the log. I uninstalled EPG Collector and deleted anything left and did a clean install. I enabled Sat>IP and selected Freesat under Create Collection Parameters and the result is in the attached log! Chris
There is no need to scan all 8 Mux as the same EPG date is on all Mux. I just scan 2 Mux as a backup. The only difference is that the data for channels native to the mux is transmitted more frequently. There is even BBC West EPG data even though its not broadcast on the Ridge Hill "West" mux! In reality its hardly worth bothering with offsets as the majority of the population are using a standard TV set which don't know about offsets! I do have offsets for my PVR tuning as it was easy to edit the...
I now see the confusion as you are talking about the Sub Title in the "Description" field and I am talking about it in the "Title" field. I dont have a Freeview TV connected to a aerial but I do have a Freesat box and can see the Sub-tile in "Description" field in the EPG. As far as I can tell the BBC and some other channels never put a Sub-Title in the description. My interest in the Sub-Title in the Title started when I was unable to record a recent BBC series because the Sub-Title which is different...
I am confused!! Are you saying that EPG Collector should extract the Sub-Title as I was assuming it did nothing? Some of my channels have lots of Sub-Titles but dont know if they were created by the broadcaster or extracted by EPG Collector. Some channels such as all the BBC channels have no separate Sub-Titles at all which is why I assume EPG Collector is not extracting the Sub-Title. Until I saw a comment in an earlier post about extracting the Sub-Title I was going to get my son to write a script...
This is mentioned several times in discussions but nothing useful. In the UK there is no standard way of transmitting the Sub-Title even on the same channel. A few channels do sometimes populate the “Sub-Title” field as the XML file created by EPG Collector does occasionally have a Sub-Title field. The majority of EPG items are simple and have no sub-title. However if the Title contains a “:” it can mean that the text after it is the sub-title but often not! There are various combinations used:-...
Just to add that My5 is now 5Select and Spike+1 is 5Spike+1 and that Paramount Network is on COM4 Freeview Channel 57 and there is EPG data. However it looks like Paramount may have replaced Spike+1!!
I discovered that I had the invalid character problem on UK Freeview only yesterday and in my setup meant no EPG. Luckily Freesat EPG still works so I mapped the important channels to the Freesat EPG. Was just about to post the problem when I found this thread and also the Update which cured the problem! Thanks Steve.
The Freesat and Freeview EPG data from EPG Collector is identical. This is the same...
As far as I am aware in the UK no info is broadcast indicating that a programme is...
As you say only one frequency is needed but sometimes adding multiple can fill in...
Which Mux do you collect from and what time do you schedule it? I collect from just...
I am not certain we are talking about the same thing but I use the default 300 sec...
I have noticed another Freesat and Freeview HD corruption in the XML file connected...
I now understand the reason the problem seemed so random is it didnt happen to normal...
I have installed the update and it seems to have cured the predictable problems on...
Thanks Steve but it may be Sunday before I am able to install and test it. Chris
Thanks its not a show stopper but is a little irritating! Its only been a problem...
First have included link to Freesat dump:- https://drive.google.com/open?id=0By6PKMAbJoLbYWxTdEdHRmhUOGM...
Every day examples using Freesat EPG data are :- CNN Newsroom becomes CNNN Newsroom...
Thanks Steve. I can confirm that the Freesat EPG xml file now contains the pound...
Thanks Steve I will install the new version and report back in a day or two. I did...
Thanks Steve. Yesterday I started using the hard disk from my test PC in my main...
After more investigation the inconsistency I was seeing with the Freeview setup is...
It looks like some of the problem is probably caused by a problem with the Windows...
Thanks Steve. Although I have spent some time investigating the problem I will spend...
I recently noticed ?? appearing several times in the EPG so looked at the TV EPG...
The dissapearing ini files happened several times over several days on the test server...
The dissapearing ini files happened several times over several days on the test server...
I recently bought a DVB-S2 card so now have a Freeview.ini and Freesat.ini file....
I recently bought a DVB-S2 card so now have a Freeview.ini and Freesat.ini file....
Thanks that cured the problem! Those language settings were probably made a year...
Sorry for the delay! Below is link to full transport stream dump containing the EPG...
I have been using EPG Collector to extract the UK Freeview EPG for SD channels for...
Thanks to your comments above I ran the previous install of Windows to check the...
A year or two ago when I did an EPG Collector "All Users" install the ini file was...
Steve thanks for your offer to add the feature but its just not worth doing I suspect...
Is there a setting in EPG Collector that gives the output ( <episode-num system="dd_progid">...