Activity for Manfred ROSENBERGER
-
Manfred ROSENBERGER posted a comment on discussion Help
a free version of rattleCAD 4.0 is available on https://rattlecad.gumroad.com/l/FYhsl rattleCAD 4.0 comes in a .tar file including runtime and startscript.
-
Hi Vincent, you will find the newest details on rattleCAD.com Manfred
-
could you please send me a private message? Manfred
-
read a svg node as a group item
-
movebare -> bareMove
-
super_Canvas.tcl
-
changes
-
class_Canvas.tcl
-
super_Extension_SVG.tcl
-
Squashed commit of the following:
-
create StageInterface
-
super_ItemIF.tcl
-
super_ItemIF.tcl
-
0.20
-
tkpath requires update before creating object
-
state
-
Hi I did some updates and starts testing now! lets see if can make it run on my Fedora 30 Manfred Am 21.10.2019 um 19:02 schrieb Michael Woon: Hi Manfred, any progress? This might give you a clue (I'm not actually sure what to make of it): Fedora 28 didn't automatically have |BASH_FUNC__module_raw%%| et al automatically exported to the environment (from god knows where, it seems to be a thing people are unhappy about: https://access.redhat.com/discussions/4124031), and runs rattleCAD just fine. When...
-
I hink you are close to it. ... outside the topic: do you what BASH_FUNC__module_raw%% is for? Manfred
-
Hi, I found a similar known problem for mozilla https://bugzilla.mozilla.org/show_bug.cgi?id=1454339 I have to dive into it this will be fixed in the next version coming the next days. Is this OK for you? Manfred
-
Hi Michael, rattleCAD 4.0 has required batteries included, so there is no need to install any additional tcl stuff. however: As I could see, the problem is located in a procedure that cares about the shell environment. I fear I have to test it specifically on a Fedore Linux too. If you type in your command shell: env can you post the output? do you get any string with the name BASH_FUNC__module_raw or %%? Manfred
-
Hi, I try to answer your questions: the pdf-files are stored in the "export" directory rattleCAD 4.0 does not require ghostscript anymore * frame jig: by concept this view is an abstraction of the bicycle/frame geometry. its aim is (so far) to transfer the numbers to your frame jig and so a 1:1 scale should not be required. which version do you use: Free or Private? if you use the private version please contact me via rattlecad.com -> author latest version of rattleCAD 4.0 is version 14. version...
-
Hi Fletcher, pleaseprovide me your project file to rebuild the situation. does this failure also occur with rattleCAD 4.0.14? thanks, Manfred
-
# 0.18 - 2019/04/14
-
Hi Pietro, did you succeed? Manfred
-
rattleCAD goes 4.0 you can get more details here: rattlecad.com rattleCAD 4.0 comes with an installer for windows 64 and packaged app for MacOs
-
rattleCAD goes 4.0 you can get more details here: rattlecad.com
-
rattleCAD goes 4.0 you can get more details here:
-
rattleCAD goes 4.0 you can get more details here: www.rattlecad.com
-
remove debug:
-
... cleanup for ttk::themes
-
build.xml
-
reorganize lib/lib_cad4tcl.tcl
-
... several changes
-
0.14 cleanup VectorText usage
-
could you upload your svg-file, please?
-
Hi Pietro, rattleCAD requires a specific format of svg that contains no <path> element. You can find a tool included in rattleCAD to convert a standard svg-file to a rattleCAD-like svg-file.</path> File -> SVG-Component opens a tool named: simplifySVG opens a additional GUI to read standard SVG and vonvert it into a rattleCAD-like SVG-file. ... load your logo and export it with a new name. tipp: your logo needs a defined origin position that i t can be placed correctly best way to do this: create...
-
reorganize lib dir
-
cleanup
-
debug: add sensitiveArea
-
avoid debug message at destroy VectorText
-
remove vectorfont
-
0.14 cleanup VectorText usage
-
cleanup variable ...
-
cleanup variable ...
-
cleanup variable ...
-
debug cleanup variable
-
0.11 ... remove puts "... " from createDraftLine
-
firs svgFont
-
cleanup
-
fix draftFrame - text
-
cleanup
-
... refresh from rattleCAD
-
add class factory_VectorText.tcl
-
first attempt to remove vectorfont
-
cleanup for 0.11
-
0.07
-
ant - build script
-
0.07 ... smaller cleanups
-
it depends on the pivot center of the saddle. this could only be determined by the technical specification of the seatpost ... if available ... ... in the one bolt-image it will be close to zero ... but I am not sure ... from my experience the technical specifications are not really satisfying ... :( in the attached image the centerline of the saddle rail does not go through pivot position of the seatpost (blue circle)
-
Hi, please take a look here: it works the same on windows https://sourceforge.net/p/rattlecad/discussion/1080424/thread/9834c8f8/#8afb the difference is; https://www.androwish.org/download/index.html http://www.ch-werner.de/AndroWish/vanillawish-65f348db8d-win64.exe run rattleCAD: have vanillawish and rattleCAD.kit in the same directory vanillawish-65f348db8d-win64.exe rattleCAD_3.6.26.kit Manfred
-
it is all about the blue coloured point in the last image
-
it is all about the blue colourd point in the last image
-
it is to handle different types of seatposts: as you can see, there is a parameter missing for the 2 bolt seatpost
-
it is to handle different types of seatposts:
-
fine! thanks, best regards Manfred Am 14.11.2018 um 22:29 schrieb Gert Cobbles: Hi MAnfred, with the 32 bit version it works. Thank you gert Open .kit file in linux ? https://sourceforge.net/p/rattlecad/discussion/1080424/thread/9834c8f8/?limit=25#f0f7 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/rattlecad/discussion/1080424/ To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
-
Hi Gert, sorry, I do not provide the zip-file anymore. ./vanillawish-65f348db8d-linux64 ... as the name says ... it is 64 bit and does not work on 32 bit Linux. but the 32 bit version should also be available at christian werners donwload page ... best, Manfred Am 12.11.2018 um 22:28 schrieb Gert Cobbles: Hello Manfred, the solution above doesn't work for me. The terminal says: bash: ./vanillawish-65f348db8d-linux64: cannot execute binary file: Fehler im Format der Programmdatei Does it only work...
-
Hi Gert, sorry, I do not provide the zip-file anymore. ./vanillawish-65f348db8d-linux64 ... as the name says ... it is 64 bit and does not work on 32 bit Linux of course. but the 32 bit version should also be available at christian werners donwload page ... https://www.androwish.org/download/index.html best, Manfred
-
Hi Gert, sorry, I do not provide the zip-file anymore. ./vanillawish-65f348db8d-linux64 ... as the name says ... it is 64 bit and does not work on 32 bit Linux of course. but the 32 bit version should also be available at christian werners donwload page ... http://www.ch-werner.de/AndroWish/ best, Manfred
-
One more question in case of debug: could you please provide me the content of osEnv-Tab in rattleCAD Info-Panel? rattleCAD -> ? -> Info -> osEnv or ctrl + I -> osEnv ... to find out what was responsible for the error thanks, Manfred
-
the latest should work, but I did not test it yet
-
maybe please try this version: https://sourceforge.net/projects/rattlecad/files/3.6/rattleCAD_3.6.26.kit/download and keep me updated, Manfred
-
or could you please provide me the content of your PATH-variable? Manfred
-
looks like to be the same problem as in here: https://sourceforge.net/p/rattlecad/discussion/1080424/thread/e5b3b20f/ did you install a new other software? from Autodesk, maybe? Manfred
-
0.10
-
configure
-
0.10
-
fork and headtube clearance? or fork and downtube clearance? could please add a sketch or an image?
-
Check fork headtube clearance
-
fork and headtube clearance? could please add a sketch or an image?
-
Persistent jig selection
-
Customizable default folder for project files
-
The settings have to be done in the file: ~/.rattleCAD_init@{yourHostName}.xml <?xml version="1.0" encoding="UTF-8" ?> <root> <hostname>innb01807</hostname> <fileName>U:/.rattleCAD_init@innb01807.xml</fileName> <fileCreated>2018.09.19 14:34</fileCreated> <config> <config name="_test">_any_Value</config> <config name="Canvas_Antialias">on</config> <config name="ProjectDir">C:\_Dateien\__rattleCAD\project</config> <config name="ExportDir">C:\_Dateien\__rattleCAD\project\export</config> <config name="ExportDir_html">C:\_Dateien\__rattleCAD\project\export_html</config>...
1 >
