Max

Hi Corey, thank you so much for your answer. I know these USB serial adapters of dubious quality. Indeed, it is one of these with the Prolific (or Profilic) chipset. But it is enough to quit ser2net with crtl c and start it again to "solve" the problem. I am not using ser2net as a service. I'm using version 3.5 because it is the easiest way to install it on the Raspberry. I tried to install version 4.x but I struggled installing gensio. I added now a timeout of 2 seconds. Let's see, if it's working....

Hi, I am using ser2net (V3.5) to send GPS data (NMEA stream) to several network devices with a RaspberryPi. My ser2net.conf: 4444:raw:0:/dev/ttyUSB0:38400 8DATABITS NONE 1STOPBIT max-connections=20 LOCAL kickolduser CONTROLPORT:4445 But after a while, sometimes 2 minutes, sometimes more than 12h, I dont get any data any more from ser2net although there is still data fed in by ttyUSB0. After checking the controlport with "showport" shows me, that the clients are still conected, but "bytes written...

Hi David, tnx for the answer! Before I will try your sugestions: where I can download the DEV branch of Linpac? (Sri for the question, I am a Linux beginner...) I am using Linux Mint (19.2, 64bit) in a VM. 73 de Max DH7AHK Am 12.01.2020 19:11 schrieb David Ranch: Hello Max, What is the directory path that you're trying to compile Linpac in? It looks like /home/linpac-0.25/src" but that wouldn't be a valid user directory. Consider building Direwolf in a dedicated build directory such as /usr/src/archive/direwolf....

./configure ist fine, but make shows this in the end: collect2: error: ld returned 1 exit status Makefile:338: recipe for target 'linpac' failed make[3]: [linpac] Error 1 make[3]: Verzeichnis „/home/linpac-0.25/src“ wird verlassen Makefile:423: recipe for target 'all-recursive' failed make[2]: [all-recursive] Error 1 make[2]: Verzeichnis „/home/linpac-0.25/src“ wird verlassen Makefile:348: recipe for target 'all-recursive' failed make[1]: [all-recursive] Error 1 make[1]: Verzeichnis „/home/linpac-0.25“...