Activity for Darren Farmer
-
Darren Farmer posted a comment on ticket #5120
-i, --info Prints the device model number, serial number, firmware version, and ATA Standard version/revision information. Says if the device supports SMART, and if so, whether SMART support is cur‐ rently enabled or disabled. If the device supports Logical Block Address mode (LBA mode) print current user drive capacity in bytes. (If drive is has a user protected area reserved, or is "clipped", this may be smaller than the potential maximum drive capacity.) Indicates if the drive is in the smartmontools...
-
Yes, that is the complete output. I think this is the "experimental" part of smartctl support.
-
Ubuntu 18.04 Desktop
-
No, there are no regular hard drives. -- Darren Farmer darren@3farmers.com http://3farmers.com On Sat, May 5, 2018 at 3:14 PM, Jamie Cameron jcameron@users.sourceforge.net wrote: Looks like the output from smartctl -i is quite different to what Webmin expects. Does this system have any regular hard drives in it? If so, what output do you get if you run smartctl -i on one of those devices? [bugs:#5120] https://sourceforge.net/p/webadmin/bugs/5120/ SMART Drive Information Not Available for NVMe drives,...
-
sudo smartctl -i /dev/nvme0n1 smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLB512HAJQ-000L7 Serial Number: S3TNNE0JB04070 Firmware Version: 4L2QEXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 4 Number of Namespaces: 1 Namespace...
-
Hi, it has some info: https://photos.app.goo.gl/ZWXpschku3AGq7WN7 But I would expect something like the output of smartctl: https://photos.app.goo.gl/7nfENv7rK7QE9JXd6 Perhaps the temps and error status' could be read?
-
Hi, it has some info: But I would expect something like the output of smartctl: Perhaps the temps and error status' could be read?
-
I agree it's likely not necessary. But, smartmontools supports it, smartctl returns data, the Webmin system should use it. It currently deosn't. This seems like a bug.
-
SMART Drive Information Not Available for NVMe drives, Ubuntu 18.04
1
