Daniel Cioba

Now is working , good job Anobius !!! What was the problem , if you want to share it with us ? And one more question , what is the ADC speed since these PIC's have many more clocking options than High , Medium and Low ?

Ok

Sorry , not changing , same value for ADFVR_OFF , 4x , 2x , 1x , still using Vdd as Vref , the library is from the archive you uploaded , it was made ( last time modified ) in 16-07-2017 . These microcontrollers are for sure very closed related like many more that use FVR register , but are not identical ... since don't share the same datasheet .

Sorry , not changing , exactly as before , the library is from the archive you uploaded , it was made ( last time modified ) in 16-07-2017 . These microcontrollers are for sure very closed related like many more that use FVR register , but are not identical ... since don't share the same datasheet .

Sorry , not changing , exactly as before , the library is from the archive you uploaded , it was made ( last time modified ) in 16-07-2017 . These microcontrollers are for sure very closed related like many more that use FVR registers , but are not identical ... since don't share the same datasheet .

Sorry , not changing , exactly as before , the library is from the archive you uploaded before , it was made ( last time modified ) in 16-07-2017 . These microcontrollers are for sure very closed related like many more that use FVR registers , but are not identical ... since don't share the same datasheet .

Here you have both test programs , just adapted for my setup . In this case it seems that simulation is far far away from reality . Edit: Sorry , I made myself a mistake , Vref non selectable was allways at Vdd not 4V , but i only have 4,6V power supply and Vref = 4,096 is in fact allmost 4,4V on this chip , they are pretty close. So internal reference can't be selected at all with GC instructions .

Here you have both test programs , just adapted for my setup . In this case it seems that simulation is far far away from reality . Edit: Sorry , I made myself a mistake , Vref non selectable was allways at Vdd not 4V , but i only have 4,6V power supply and Vref = 4,096 is in fact allmost 4,4V on this chip , so they are pretty close. So internal reference can't be selected at all with GC instructions .