Dario Martin Lobos

Attached is the circuit with the triac driver modified, Both previous and this one should work this avod a big resistor 10W (Minumun needs 5.6W). Simulation of triac is not working properly. I splitted simulation in low current booster, high current booster, esp32 signal driver and triac dc driver. All files are in the link. Complete is not simulating and triac model does not work. Defining ground is problematic. Are also handling the computer to disturb, https://drive.google.com/file/d/1XaPlcyG...

I modified the circuit to improve signal to mosfets. Simulations are attached. Transistors that charge and discharge Pmosfet can be bigger and can be used more frequency or PW but is known that frequency increase switching losses and Like this works limiting to 200mA is enough to don't produce switching of P and N mosfet overlap. The problem of Isolator still is present I need to change it by a DC/DC isolator do a bridge rectify ripple with a capacitor and have constant 50 mA in triac to continuous...

I modified the circuit to improve signal to mosfets. Simulations are attached. Transistors that charge and discharge Pmosfet can be bigger and can be used more frequency or PW but is known that frequency increase switching losses and Like this works limiting to 200mA is enough to don't produce switching of P and N mosfet overlap. The problem of Isolator still is present I need to change it by a DC/DC isolator do a bridge rectify ripple with a capacitor and have constant 50 mA in triac to continuous...

I don't understand really the terminology. I never received a class of electronics and just learned myself reading books or Internet. This is what could do to deliver power from an ESP32 to big mosfet to control a booster and a transformer. The ESP vary Width pulse according voltage across an optocoupler, keeping voltage steady. Two operational amplifier with a filter, for slower reaction, choose between two booster according current and have an over current protection. I this circuit had a problem...

This is the first simulation of the complete circuit. If don't function as is expected and must be revised. Each simulation delay in my computer about half an hour so gonna delay solve all issues but noW (SOMEONE HACK TO CHANGE MY WRITING, A MISTAKE SHOULD BE Q OR E BUT NOT T) since simulate improving is assisted by a predicted result. MANY THANKS FOR YOUR HELP!!!

This is the first simulation of the complete circuit. If don't function as is expected and must be revised. Each simulation delay in my computer about half an hour so gonna delay solve all issues but not since simulate improving is assisted by a predicted result. MANY THANKS FOR YOUR HELP!!!

This is the first simulation of the complete circuit. If don't function as is expected and must be revised. Each simulation delay in my computer about half an hour so gonna delay solve all issues but not since simulate improving is assisted by a predicted result. MANY THANKS FOR YOUR HELP!!!

deleted