DM

I was able to fire up both the LTS and Buster build in a VM yesterday and the Ettus support is correct. Depending on the build, I need to run uhd_images_download(er) to pull the FPGA image for my radio. Then I run uhd_usrp_probe to match the hardware to one of the images just downloaded. GQRX worked in the LTS version right away after I ran those two commands and even detected it in the hardware menu. The Buster version did not detect the hardware, I can manually type in the correct value and get...

I think there is an intel package that can be installed to do opencl if needed for osmocom fft andd gr-fospher, of course a gpu will be much better. hmm, this might be a question for Bastian on potentially a rewrite to install all of these as root for the system / all users to use. I have several RTL-SDR, Hackrf, 2 different Ettus, and I think one other that I can test with if needed as well. On Mon, Apr 20, 2020 at 6:32 AM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: I got as far as getting...

Yeah, it might not build properly right now due to pybombs. It might work fine as long as you use the fork from https://github.com/jonpeck/instant-gnuradio. This is because several things regarding emacs in the original are broken in some updated versions. Regardless, I just commented those out and rebuilt it a couple of times. One of the things that is no mentioned is that you will need Virtualbox 6 or better with all virtualization and nesting enabled. I ran into this issue for a little while because...

I'm happy to help test it when you have a test ready. On Sun, Apr 19, 2020 at 9:12 AM Cemaxecuter cemaxecuter@users.sourceforge.net wrote: Thank you for the suggestion and request. I will try and add. Hopefully i can borrow an ettus or I might have to get some feedback from you or others letting me know it works well. I'll add to the list for the next release. Request Ettus UHD Support https://sourceforge.net/p/dragonos-10/discussion/general/thread/6ca50a447d/?limit=25#86d1 Sent from sourceforge.net...

There are a couple of scripts to turn it into a bootable ISO (a trimmed down version) there are also other tools we could use to install it to baremetal. I'm not sure how your build process is scripted, I just thought that with multiple people working on something very similar it would be nice to reduce some overhead. With this one I'm able to help testing by making a change or two and letting it build for an hour or so. Right now I'm beating my head against a wall with Gnuradio 3.8 (from pybombs)...

I did not see in the list of supported SDR software the Ettus UHD driver. If this is not already included, I woul like to request it be included.

I would like see about adding dSpectrum for protocol analysis. https://github.com/tresacton/dspectrumgui

Thank you so much for building this. So much time is wasted getting the base OS with the SDR software installed and ready to go. I wanted to see if you have seen the following project. It's geared at automating the install / building of an OS with SDR software in it. I understand you are using Deb10, this project is using Ubuntu 18.04 LTS with some slow work being done to port it over to 20.04 LTS (beta). The methods used to build this will work with Debian as well. I would encourage you to reach...