Marco

Hi, my generated PDF´s sometime break (or skip the value) if the content have special combinations like ">4" or "<4" and also if the input begins with blank spaces. The content will be fetched with PDO::FETCH_ASSOC. Andy Ideas why the happens? Thanks, Marco

I tried both filters, no success. I will try some other configurations and give feedback when I get it to work. Thanks again.

etherape -i any = see perfect lan traffic and same HTTP traffic as described above. I think also that Etherape works fine, if i sniff the wlan connection with ip get from dhcp (instead of the mirror port between the routers), everthing shows perfect if i only want to see network traffic. Is this maybe a better configuration? [isp]<---->[1.Router zyxel/only establish one isp connection]>-----[2.lan router bintec/manage different lan routing / vlan / voip connection / dhcp]----<[switch with mirrorport]>-----[first...

etherape -i any = see perfect lan traffic and same HTTP traffic as described above. I think also that Etherape works fine, if i sniff the wlan connection with ip get from dhcp (instead of the mirror port between the routers), everthing shows perfect if i only want to see only network traffic. Is this maybe a better configuration? [isp]<---->[1.Router zyxel/only establish one isp connection]>-----[2.lan router bintec/manage different lan routing / vlan / voip connection / dhcp]----<[switch with mirrorport]>-----[first...

etherape -i any = see perfect lan traffic and same HTTP traffic as described above. I think also that Etherape works fine, if i sniff the wlan interface (instead of the mirror port between the routers), everthing shows perfect if i only want to see only network traffic. Is this maybe a better configuration? [isp]<---->[1.Router zyxel/only establish one isp connection]>-----[2.lan router bintec/manage different lan routing / vlan / voip connection / dhcp]----<[switch with mirrorport]>-----[first lan...

I tried now also Etherape on ubuntu and also on raspberry (instead of VM) but have no luck. I see the IP address of the ISP Router but see no traffic if i ping him. Next to the address i see also igmp./all-systems.mcast.net and a few ipv6 adresses and thats it. I tried also other tools like ntopng but get the same results. Any ideas else what i can try?

I see no traffic if i ping the routerfrom the client. Difficult to find the reason ....

Hi, i did some tests with etherape on kali VM on local machine and see all my own traffic. But i want so see the internet traffic by switched lan. So i tried a non-switched (old) hub and placed it between router and lan components: [isp]<---->[Router /establish isp connection]>----<[hub]>-----[lan router and switches] Next i configured a managed switch to get a mirror port in the same configuration: [isp]<---->[Router /establish isp connection]>----<[switch with mirrorport]>-----[lan router and switches]...