creativehq

Hi, in the myBoards.cpp for the myFP2_A4998_324 the Coil-power cannot be switched off since ENABLE is set to LOW for both power on and off. It should be HIGH for power off. //----------------------------------------------------------------------- // void driverboard->set_motor_power(bool); // turn coil power on, turn coil power off //----------------------------------------------------------------------- void DriverBoard::set_motor_power(bool state) { if ( state == true ) { // power on digitalWrite(A4998ENABLE,...

Hi Robert, thank you for the quick turn-around, the issue is fixed. Kind regards, Nikolas

Hi Robert, the latest, myFP2ASCOM 284. Kind regards, Nikolas Am Mo., 6. März 2023 um 09:57 Uhr schrieb brownrb brownrb@users.sourceforge.net: Hi Nikolas What version of the ASCOM driver are you using? regards Robert Issue with temperature probe - serial connection lost. https://sourceforge.net/p/arduinoascomfocuserpro2diy/discussion/general/thread/88a9e6ff90/?limit=25#7245 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/arduinoascomfocuserpro2diy/discussion/general/...

Hi Robert, I am using the latest version, myFP2ASCOM_Setup284.exe and ASCOM version 6.5 SP1. Kind regards, Nikolas

Hi all, I was getting my fosucer assembled and facing a issue with adding the temperature probe and automatic temperature compensation. Whenever I have activated (and installed) the temperature probe and the ASCOM driver issues setting :230# or :231# to the focuser, the connection gets closed on a time-out, whether it is set to 5 or 30 seconds. Driver Access log: 08:47:26.205 Temperature Get GET Temperature - .NET 08:47:26.228 Temperature Get 21,5 08:47:26.247 Connected Get Issuing Connected command...