Activity for David Inglis
-
David Inglis posted a comment on discussion General Discussion
yeah, in theory they should. We have tried others of the same spec with no joy. We have now ordered multiple of these ones.
-
sorry for the radio silence - have a small update. We have just bought anotjer cable and have found it works perfectly with the B650!! Note: we installed the recommended drivers from the cable manufacturers website Attached is a photo of the packaging so you can order
-
sorry for the radio silence - have a small update. We have just bought anotjer cable and have found it works perfectly with the B650!! Attached is a photo of the packaging so you can order
-
of course, I'll take a look today
-
I guess the issue could also be the cable you are connecting to your PC - we tried a few and one didn't work but the rest did Im using whatever the latest version from Github is and collecting CSV data, 5 seconds and only ECG.
-
With regards to the cable - the one we got working is generic but it shows up on the monitor with the following details:
-
Alright. To enable S/5 data transfer, do the following: Plug a USB keyboard and mouse into the monitor Click on Monitor Setup Click on Service In the login screen, enter the username: biomed and password: Change Me (be aware this is VERY slow so be patient). Click Login (and wait) Click on configuration tab Click Network from left hand menu Click on Wired Interfaces (and wait) New screen should have some network info and a section below thay says Select Network Type Click on the box next to S/5 Click...
-
I'll post a how-to shortly
-
Ok. We have now made huge progress! After finding the setting in network for S/5 communication, we now have VSCapture working on a Carescape B650 on any USB port, using a cable that is NOT an ATEN cable. It is some generic PL2303 I think. So pleased to habe this working!
-
Thanks John. We have some PL2303 cables as well which also goce no results . Are there any settings on the monitor that could stop it transmitting? I have looked everywhere I can and can't see anything
-
hi John. I hadn't considered asking ATEN actually - that's a good idea. I had hoped maybe GE had released new firmware that may have included more drivers but can't see anything.
-
hi all, we have recently taken delivery of a number of refurbished GE Carescape B650s and we are trying to record ecg data as we do on our old S/5 monitors I have read (I think) all of the treads on this and have just read the one which details that the ATEN usb-serial cable must have a specific hardware ID (which is now discontinued). The ATEN cable we boight via the links on the discussions has a hardware ID of VID 067B Is there any way that the B650 can be updated or is there any other way of...
1