Activity for Carlos Izquierdo Vázquez
-
Carlos Izquierdo Vázquez posted a comment on discussion General Discussion
Good morning The problem I had was the GPS. I bought the small antenna model and that one doesn't work well... The blue GPS works very well, however, the screen does not show data with this sketch. All the best
-
-
Hello Robert, I have built the GPS you designed and I’m experiencing an issue. The OLED screen works, but it doesn’t receive data. The GPS doesn't blink... I have this model: https://es.aliexpress.com/item/1005006523594418.html?spm=a2g0o.order_list.order_list_main.17.792b194dEqoYU7&gatewayAdapt=glo2esp It also doesn't receive anything from EQMOD... Does it seem like the module isn't working? Thankyou
-
Hi Robert. I have made a focuser with an Arduino Pro Micro + DRV8825 (firmware 330). Everything works well, but I find it strange that, at the end of any movement, a sound can be heard in the motor/driver. Is this normal? Can something be modified in the code? I'm sending a video where you can hear it. https://drive.google.com/file/d/1jHl46D0PQObOcBcNFsVWoxEjMIYNci-5/view?usp=drive_link
-
parece ser que es un problema de mi arduino nano. he cambiado el pin 2 (DIR) a otro pin y funciona el cambio de dirección. seguirmos probando el sonsor Hall
-
I have two doubts. a) I have installed the hall sensor, but it does nothing... what should I do? I guess spin until you find the magnet... but it doesn't spin or do anything... b) On the other hand, I have seen that it only rotates the degrees that I indicate in one direction, that is, if I indicate 90º it rotates those degrees, but if I indicate 45º, it does not rotate in the opposite direction, but rather it rotates in the same direction 45º. What can happen? Thank you
-
Thank you Robert for your time!!!!! I am a fan of yours and I want to continue using your inventions!
-
Hello, Robert. I'm trying to make the change so it works on an arduino pro micro... but I can't get it to compile. Am I getting into trouble? or is it feasible Sorry for insisting
-
Thank you very much for answering! Precisely today I was going to provide this solution, since I had the same problem with a rotator using moonlite. I solved it by activating "reverse" in the driver. It's a relief to know the solution, since I like myrotator much better. One question, can the code be adapted to use an Arduino Pro Micro? I say this because I have PCB boards for focusers and they would be useful for this. Thank you so much!!!
-
Good morning. After doing some tests, I have been able to verify that the rotator rotates and behaves perfectly if it is rotated through "equipment", but if NINA uses the rotator to make a frame, it no longer works well. The sky position box appears. For this reason, as of today, it cannot be used in NINA. At least, this has been my experience. Thanks Robert for the projects you do!
-
Hello, Robert Yesterday my rotator worked great. For it to work, the "sky position" part does not have to appear in NINA. What I found surprising is that before going to sleep the rotator was correctly in NINA and when I woke up, it had changed! I attach some screenshots of what I found and right after, when I disconnected and connected again. I tell you all this in case it helps improve this great project. Thank you
-
Hello! Thanks for responding so quickly Robert! I am using the latest version of firmware (downloaded it 2 weeks ago). Since it works very well with the application, could the problem be with the driver? (I don't understand what you told me in your answer) I send you NINA's log. The screenshot I sent you corresponds to 11 p.m. All the best PD. I just reinstalled the driver and it seems that "sky position" no longer appears, only mechanical position. Let's see how it goes tonight!!
-
Hello! Thanks for responding so quickly Robert! I am using the latest version of firmware (downloaded it 2 weeks ago). Since it works very well with the application, could the problem be with the driver? (I don't understand what you told me in your answer) I send you NINA's log. The screenshot I sent you corresponds to 11 p.m. All the best
-
Good morning. Yesterday I was finally able to test the myrotator project. My configuration is the following: - 28JYB motor modified to bipolar - Driver DRV8825 Modified firmware only for the pins. I have done several tests in my living room, trying to spin it and it works perfectly. The problem arose when I used NINA's framing assistant. It has been unable to reach the desired turn, making erratic tests. I have also been unable to see the relationship between mechanical position (it matches the data...
-
I answer myself. I think it was a wiring problem. I will continue with the tests Thank you
-
Good morning. Yesterday I tried installing the rotator on the breadboard. Everything seems to work well, except that the motor remains powered continuously, although coil power is off (the driver and the motor start burning!!!) Could it be a wiring problem? Apparently it's fine.... Thanks and greetings
-
Good morning. At the moment I think I have everything under control, although I think I have burned the ESP32 mini, since I put 12V in the VIN. I don't know if it's because of the 12V or because the GND cable was cut... the result is that it doesn't turn on. I'm waiting to receive another... Thanks for everything
-
Sorry for the number of messages, but my intention is to contribute to improving this excellent work. If I activate the TM2209 board, the IDE serial gives the following error, restarting continuously 0:43.882 -> ets Jul 29 2019 12:21:46 16:00:43.882 -> 16:00:43.882 -> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 16:00:43.882 -> configsip: 0, SPIWP:0xee 16:00:43.882 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 16:00:43.882 -> mode:DIO, clock div:1 16:00:43.882...
-
I don't know if it is an error, but if it can help you, I can tell you that if I select the TMC2209 board, when compiling an error appears in this part: / ----------------------------------------------------------------------// Load Default Focuser Persistant Data Settings (when no config file exists eg; after an upload)// Creates a default config setting file and saves it to spiffs// ----------------------------------------------------------------------void CONTROLLER_DATA::LoadDefaultPersistantData()...
-
Hello, Robert! The problem with the disconnections after clicking move was that I had not put the files included in the data folder. After putting them in, so far, I have not experienced that problem. As for my setup, I'm going to use a TMC2209 (if it gives me too much trouble, I'll switch to a DRV8825) and OTA updates. Nothing more (maybe in the future I will use the OLED screen, but I don't think so). Is it possible to update the firmware with all the components connected? (in a test I did it did...
-
Good afternoon Robert. We are lucky to have someone who provides this support!!!! I have already included this modification in the firmware. Let's see if my kids leave me some free time and I can wire everything up. I always use the equipment from home, with the home Wi-Fi network. What happens if one night I have to go out to a place without internet? I think I could put the hotspot created by the minipc as a secondary network... I have to try it. Does it have Bluetooth support? Lastly, I think...
-
Good afternoon Robert. The problem I was having is that I had not loaded the files with ESPtools. Now it apparently works (I haven't wired it yet). I ask you some questions. Could it be possible to activate the web server and alpaca by default? I see that I cannot modify maxstep from managerweb, it does not exceed 20,000, with the driver from NINA I can. Thanks for your help. As soon as I connect the cables I will see the speed of movement and the microsteps. All the best El mar, 2 abr 2024 a las...
-
---------- Forwarded message --------- De: Carlos Izquierdo izquierdovazquez@gmail.com Date: vie, 29 mar 2024 a las 20:32 Subject: myfocusr ESP32 To: brownrb brownrb@users.sourceforge.net Good night. After, with your help, I managed to make the focuser work with a TMC2209 driver and with an Arduino pro micro, I have ventured to test your focuser with the ESP32 version. After doing 1000 tests I have managed to connect the ESP to the Windows application and to NINA, both with a static IP and with an...
-
---------- Forwarded message --------- De: Carlos Izquierdo izquierdovazquez@gmail.com Date: vie, 29 mar 2024 a las 21:06 Subject: Fwd: myfocusr ESP32 To: general@discussion.myfocuserpro2-esp32.p.re.sourceforge.net general@discussion.myfocuserpro2-esp32.p.re.sourceforge.net ---------- Forwarded message --------- De: Carlos Izquierdo izquierdovazquez@gmail.com Date: vie, 29 mar 2024 a las 20:32 Subject: myfocusr ESP32 To: brownrb brownrb@users.sourceforge.net PD Adjunto una captura de pantalla indicando...
-
I keep answering myself. I have managed to remove the error by eliminating the -1 of "brdpins" from the 99.jsn file. I still can't access the web service (with port 6060). "file not found" appears. In both NINA and the Windows application, if the steps are moved, it no longer disconnects. Ideas for Web service? PD I have asked to verify that it only works for me with file 99 (Custom) (another mystery...) Thank you
-
How have you solved it?
-
Good night. After, with your help, I managed to make the focuser work with a TMC2209 driver and with an Arduino pro micro, I have ventured to test your focuser with the ESP32 version. After doing 1000 tests I have managed to connect the ESP to the Windows application and to NINA, both with a static IP and with an access point. The problem is that when I press it to move, the steps don't change and it disconnects. what could happen? Thanks for everything!!! I send you the two firmwares (static IP...
-
More information about the possible failure. The serial monitor continually indicates this: Rebooting... ets Jul 29 2019 12:21:46 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:1344 load:0x40078000,len:13936 load:0x40080400,len:3600 entry 0x400805f0 E (1302) gpio: gpio_set_level(226): GPIO output gpio_num error E (1303) gpio: gpio_set_level(226): GPIO...
-
I add a screenshot so you can see what appears from the web service (in case it can give clues) I have tested on 2 different ESP32s. All the best
-
Good night. After, with your help, I managed to make the focuser work with a TMC2209 driver and with an Arduino pro micro, I have ventured to test your focuser with the ESP32 version. After doing 1000 tests I have managed to connect the ESP to the Windows application and to NINA, both with a static IP and with an access point. The problem is that when I press it to move, the steps don't change and it disconnects. what could happen? Thanks for everything!!! I send you the two firmwares (static IP...
-
[image: image.png] Good afternoon This is the engine I am using. As you say, for now I'll leave it as it is, but if I know myself... it won't take me long to change things hahaha I'm going to look at the excel file and see if I can understand it. All the best El mar, 5 mar 2024 a las 14:13, brownrb (brownrb@users.sourceforge.net) escribió: Yeah, I did say that these tmc chips is probably the toughest to do. If its running fine, I would advise to leave it as is for the time being. If you start playing...
-
Good morning. I think I'm going to stay as I am, since my knowledge does not extend to understanding the spreadsheet. Thanks again for your time Greetings
-
Good morning With the modification that you indicated in the code, the micro steps work perfectly!!!!! Thank you so much!!!! Having autohoming active is secondary, but it would be nice hahaha Greetings and thanks for your time!
-
Good afternoon. First of all, I want to apologize because it is not my intention to waste your time. In the firmware, I have only added a few lines, included in the DRV8825 version, so that the focuser with Micro can be connected to NINA and the pins, to reduce the size of the equipment (see photo). One thing that interests me is what you mentioned about not using DIAG. My knowledge is very limited (in my work I calculate metal structures...). That said, if you see that I am very far from it working...
-
Good afternoon. I send you the following information: Connection diagram Photo of the assembly Modified firmware log and screenshots Photo of the set I hope it helps you Greetings El vie, 23 feb 2024 a las 5:29, brownrb (brownrb@users.sourceforge.net) escribió: Hi Carlos 290 was deprecated, and only the latest versions on this site are supported, which at this time for the ASCOM driver is v301. Some older versions are on this site, because sometimes users want to use an older version, and I generally...
-
Good afternoon. I don't know why the fast function works now in the ASCOM 300 driver. This morning I did 1000 tests. I am sending you the log of version 300 and 290. The next thing is to see what happens with the mircosteps and autohoming, which does not work. It only works at 1/8 steps. All the best
-
Good morning. I have a similar problem. I have installed firmware version 330 for a TMC2209 and the ASCOM drivers for windows are not modified for fast speed. Yes, the Windows application does it (Not ASCOM). Even if you modify the ASCOM driver configuration, it is always set to "slow". I have the focuser connected to the fine adjustment of the telescope, so it is so slow that it is not operational. Thanks and greetings
1