Hello, I have installed OpenBTS-UMTS and it is successfully started. However I couldn't use OpenBTS-UMTSCLI utility. Following alert is generatedon console $ ./OpenBTS-UMTSCLI OpenBTS-UMTS Commnd Line Interface (CLI) utility Copyright 2012, 2013, 2014 Range Networks, Inc. Licensed under GPLv2. Includes libreadline, GPLv2. command socket path is /var/run/OpenBTS-UMTS-command response socket bound to /tmp/OpenBTS-UMTS.console.15313.5b5e9df4 Remote Interface Ready. Type: "help" to see commands, "version"...
I have recently downloaded openbts-umts from git repository but after complete installation, I noticed thart ./transceiver file in missing in TransceiverUHD folder. What could be the possible cause? My build was susccessful but transceiver is unable to start. How to clone the project properly so that nothing is missing fron final download? Thanks
I am using Ettus USRP N210, enode is up but i am unable to find the network during scan. Also, pcap file shown 0 bytes captured, although i have set the parameter as 1. Anyone to guide
Hello, I have setup OpenLTE successfully and now testing with UE, but having some issues scanning the network on my phone. I cannot see the network. Following are the specification for my setup Host machine: Intel Core i7 with Ubuntu 16.04; the setup is configured on host system Radio used: USRP N210 series with Ethernet connectivty phone: Huawei mate 10 lite, SamSung Galaxy s3, Samsung Galaxy Note5; I have configured apn as 'openlte' 'www.openLTE.com' current CPU frequency is 3.60 GHz. current config...
Waiting for reply.
Hello, I have setup OpenLTE successfully and now testing with UE, but having some issues scanning the network on my phone. I cannot see the network. Following are the specification for my setup Host machine: Intel Core i7 with Ubuntu 16.04; the setup is configured on host system Radio used: USRP N210 series with Ethernet connectivty phone: Huawei mate 10 lite, SamSung Galaxy s3, Samsung Galaxy Note5; I have configured apn as 'openlte' 'www.openLTE.com' current CPU frequency is 3.60 GHz. current config...
Hello, I have setup OpenLTE successfully and now testing with UE, but having some issues scanning the network on my phone. I cannot see the network. Following are the specification for my setup Host machine: Intel Core i7 with Ubuntu 16.04; the setup is configured on host system Radio used: USRP N210 series with Ethernet connectivty phone: Huawei mate 10 lite, SamSung Galaxy s3, Samsung Galaxy Note5; I have configured apn as 'openlte' 'www.openLTE.com' current CPU frequency is 3.60 GHz. current config...
hi i am using NI USRP 2922, its has only ethernet port. does openLTE required usb3.0 at must ? secondly i am running the setup in vmware with ububtu 16.04 and getting the following error. 04/16/2018 03:30:49.096914 warning msgq LTE_fdd_enb_msgq.cc 234 mac_to_timer circular buffer empty on receive 04/16/2018 03:30:49.097133 warning msgq LTE_fdd_enb_msgq.cc 234 mac_to_phy circular buffer empty on receive