bugrahan guner

Hi Percy, We did the permission part. Now when we want to start we get the following error. tech@dell:~$ gxsm3 (gxsm3:658598): Gtk-CRITICAL **: 10:10:11.310: gtk_combo_box_text_insert: assertion 'text != NULL' failed (gxsm3:658598): Gtk-CRITICAL **: 10:10:11.310: gtk_combo_box_text_insert: assertion 'text != NULL' failed (gxsm3:658598): Gtk-CRITICAL **: 10:10:11.310: gtk_combo_box_text_insert: assertion 'text != NULL' failed (gxsm3:658598): Gtk-CRITICAL **: 10:10:11.311: gtk_combo_box_text_insert:...

Hi Percy, The issue was when we wanted to use the 'lift off' mode, we wanted to get a topo image over a line, finish the forward and backward imaging of the line and follow the same line path by lifting our cantilever with a certain amount so we can make measurements over the same line when we are far away. We are mainly using XS 2nd ZOff value in the Advanced tab SR DSP Control to tune this distance. However the value we put in there is not applied during the second scan of the same line (the software...

Hi @zahl, We had a recent problem that you patched and solved for the lift mode. I guess we kind of updated the software first time that we got the patches from you. Is there a way that we can only configure this patch but don't receive other updates or updated patches as we don't want to mess with the system's current condition but just want to fix the same issue regarding the lift off height change? Previously we installed the software based on the suggestions in the feed (https://sourceforge....

Hi @zahl, We were recently trying to do some indentation measurements by using the Z control menu. I am describing the problem below and will be attaching the necessary screenshots. Thank you in advance for your help. We need to be able to record the loading and unloading curves for this. So far it records the unloading part without a problem but trying to record the loading part (initial move towards the surface) as well, we tried using the 'dual mode' and the 'full ramp' options. I believe the...

Hi @zahl, We were recently trying to do some indentation measurements by using the Z control menu. I am describing the problem below and will be attaching the necessary screenshots. Thank you in advance for your help. We need to be able to record the loading and unloading curves for this. So far it records the unloading part without a problem but trying to record the loading part (initial move towards the surface) as well, we tried using the 'dual mode' and the 'full ramp' options. I believe the...

Hi Percy, Recently. we started to encounter an 'autosave' issue. While we are using the compiler to complete consecutive GVP executions, at some point the software stops saving files. After a certain period of time, it again starts saving the files. Meanwhile, it correctly executes the GVP though. Do you have any idea how can we address this issue. Since we are using the software for long experiments, too much data is lost during the process. Best. Bugrahan

Hi Percy, I am sending the picture of the errors in detail. Currently, when we utilize GXSM software Ubuntu displays the same error each time we use Execute command under the GVP window. In addition, all the cables are connected to USB 3.0 portals we are not running anything with USB 2.0 compliant. We just wanted to check whether this error might be arising due to the current Ubuntu version (20.04) and could upgrading the system to 22.04 might be the solution to prevent the freeze issue without damaging...

Hi @stm and @zahl, We installed a fresh 20.04 and installed the GXSM through ppa to that system. It is working generally fine but when we initially click execute we encounter the attached error and seems like the ubuntu freezes for a moment. It may be better to update the ubuntu to a newer version. I wanted to ask what should we do for GXSM if we update the ubuntu so it will work as it is right now. Are there any update codes or something like we run after a kernel update that we should run so GXSM...