Anıl An

The sudo command is not used in this process. Using sudo will result in a dpkg error. You must use this command before the last exit command. dpkg-reconfigure grub-efi-amd64 You can try again without using sudo. You must use this command before the last exit command. dpkg-reconfigure grub-efi-amd64 Let me re-list the steps here. 1- sudo -i Enter all of these commands into the terminal at once, replacing the number 2 with the partition number. 2- mount /dev/sda2 /mnt && mount --bind /dev /mnt/dev...

You enter all the commands together. There's no problem with this process. It's also helpful to enter the following command before using the last commands: dpkg-reconfigure grub-efi-amd64 Paul Albertsma palbertsma@users.sourceforge.net, 25 May 2026 Pzt, 05:56 tarihinde şunu yazdı: Hi Anıl An, Thanks again for answering! I have a few questions: 1. Is it right that I only use these instructions underneath, this part of your link, in case I have the new UEFI installed? 2. Do I have to enter all of the...

Thanks for the feedback. Yes, this is related to EFI. Sometimes the EFI disk partition can be insufficient or corrupted. Sometimes, booting with the nomodeset or acpi=force option on the first boot can solve the problem. Sometimes, although it's a bit risky, deleting the EFI disk partition and reformatting it with the esp option can be a solution. I've experienced this problem many times in other distributions and even in Debian itself. So, if the installer doesn't like something, it can cause such...

Hello. From what I've researched, it might be due to automatic suspend mode. To fix this, try the following method: Open the file with this command: sudo mousepad /etc/pulse/default.pa Check the beginning of the following line in the file with a square: like this: load-module module-suspend-on-idle Do this, save and close the file. load-module module-suspend-on-idle Then refresh pulseaudio with the following command or restart your computer: pulseaudio -k && pulseaudio --start Anıl An besgnulinux@users.sourceforge.net,...

Hello. If such problems occur, try to solve them by changing the sound card in the Pavucontrol tool. Also new version is coming soon. There is no Pavucontrol in the new version, instead the Pasystray tool will do the same job. Paul Albertsma palbertsma@users.sourceforge.net, 22 May 2026 Cum, 13:21 tarihinde şunu yazdı: [tickets:#5] https://sourceforge.net/p/besgnulinux/tickets/5/ Sound lost in BesgnuLinux 3.* Status: open Milestone: 1.0 Labels: Sound lost No sound Created: Fri May 22, 2026 10:21...

Do not add to the panel manually; use the "Add to Panel" tool.

To add an icon to the panel, you can use the "Add to Panel" tool via Menu > Besjwm. If you want to add an icon to the menu, you can use the "Add to Menu" tool via Menu > Besjwm. Items added using these tools will not disappear when you restart your computer. Good luck and thank you. Giuseppe batmanxxx@users.sourceforge.net, 22 Şub 2026 Paz, 06:11 tarihinde şunu yazdı: [tickets:#4] https://sourceforge.net/p/besgnulinux/tickets/4/ Deakstop issues Status: open Milestone: 1.0 Created: Sun Feb 22, 2026...

Hello. To add an icon to the panel, you can use the "Add to Panel" tool via Menu > Besjwm. If you want to add an icon to the menu, you can use the "Add to Menu" tool via Menu > Besjwm. Items added using these tools will not disappear when you restart your computer. Good luck and thank you.