This question is still unaswered. It will be helpful if I can get an answer.
I see three transformers in the the file IEEE123Regulators.dss. I see that all three transformers have exact kv and kva. However the ctprim are different. I am curious to know how those numbers were calculated. ! Have to assume basically zero impedance regulators to match the test case new transformer.reg2a phases=1 windings=2 buses=[9.1 9r.1] conns=[wye wye] kvs=[2.402 2.402] kvas=[2000 2000] XHL=.01 %LoadLoss=0.00001 ppm=0.0 new transformer.reg3a phases=1 windings=2 buses=[25.1 25r.1] conns=[wye...
The PVSystem model in OpenDSS with a certain power factor value drops kVAr output...
I am using volt-watt modes to control inverters. Here are the snipptes that I am...
Thank you for replying. The follow on to the previous question is that when I try...
I am trying to dispatch energy storage system based on a storage controller. For...
Thank you for your reply. Does that mean the existing VOLTVAR control code in OpenDSS...
This topic is regarding the existing inverter voltvar contol mode in OpenDSS. User...
Is it total losses for entire timeseries duration or the last time step?
I am trying to run a timeseries simulation using Python COM. Moreover, trying to...
The r,x and c values entered for a line goes through a mathematical process and reaches...
Network reduction is working. Looks like the algorithm reduces only the nodes with...
I updated the opendss.exe to the most recent version. I am trying this feature on...
Thank you for the reply. Is the version 7.6.4.36 capable of reducing the network?...
Hello, I have two questions. Does OpenDSS have any internal algorithms for network...
Thank you for the reply. Now the DLL is working as expected.
Thank you for the reply. As you mentioned in the reply, the DSSCallBackRoutines.pas...
Thank you for the detailed explanation. This cleared a lot of questions. I tried...
Thank you for the reply. The question which follows the discussion is this. Is there...
The process of developing a user-defined DLL needs these two files - 1. MainUnit.pas...
This question is regarding the values of voltages and currents of the node where...
Thank you for your reply. Corrected question - Does OpenDSS by default consider that...
This topic is about the calculation of the neutral currents. Are the neutral currents...
The DLL seems to be working fine. I have few questions on the sign convention of...
Thank you for your reply. I did get to work some of the parts. As I understand the...
Based on the example of IndMach012a.dll I tried to build an user defined dynamic...
Thank you for the reply. I got it working. The issue was with the use of keyword...
This question is regarding the creation of user defined model. I am used to OpenDSS...
I am trying to solve a simple 5 bus system in dynamics mode along with the user defined...