MN: hv32xcat04(9.114.154.79/192.168.5.184) RHEL6, xCAT 2.5 7/26 build
CN: hv32xcat05(192.168.5.185)
SLES11 SP1 diskful installation failed and hangs on "manual setup program" interface
How to reproduce this issue:
1)Config MN with latest xCAT 2.5 build.
hv32xcat04:/ # rpm -qa |grep -i xcat
atftp-xcat-0.7-10
xCAT-2.5-snap201007252254
openslp-xcat-1.2.1-1
perl-xCAT-2.5-snap201007252253
xCAT-server-2.5-snap201007252253
yaboot-xcat-1.3.15-05262010
xCAT-client-2.5-snap201007252253
2) Define compute node and prepare the diskful installation
hv32xcat04:/ # lsdef -l hv32xcat05
Object name: hv32xcat05
arch=ppc64
cons=hmc
currchain=boot
currstate=install sles11.1-ppc64-compute
groups=lpar,all
hcp=w1m6hmc01.ppd.pok.ibm.com
id=6
installnic=eth1
kcmdline=autoyast=http://192.168.5.184/install/autoinst/hv32xcat05 install=http://192.168.5.184/install/sles11.1/ppc64/1 netdevice=4a:23:c3:33:91:04 dhcptimeout=150
kernel=xcat/sles11.1/ppc64/inst64
mac=4a:23:c3:33:91:04
mgt=hmc
monserver=192.168.5.184
netboot=yaboot
nfsserver=192.168.5.184
nodetype=lpar,osi
os=sles11.1
parent=Server-8236-E8C-SN101DA7P
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
pprofile=hv32xcat05
primarynic=eth1
profile=compute
provmethod=install
status=powering-off
statustime=07-27-2010 07:14:53
tftpserver=192.168.5.184
xcatmaster=192.168.5.184
3) rnetboot CN and found CN hangs on following interfaces
IBM Virtual SCSI 0
drivers: ibmvscsic
IBM Virtual Ethernet card 0
drivers: ibmveth
IBM Virtual Ethernet card 1
drivers: ibmveth
IBM Virtual Ethernet card 2
drivers: ibmveth
Reading driver update: disk:/?device=usb
Sending DHCP request to eth1...
*** Could not find the SUSE Linux Enterprise Server 11 Repository.
Activating manual setup program.
Linuxrc v3.3.56 (Kernel 2.6.32.10-0.4-ppc64) <<<
Main Menu
1) Start Installation
2) Settings
3) Expert
4) Exit or Reboot
Finally we found this issue was because the apache service was not running. When I start
apache service manually, the diskful installtiion could succeed.
Then I find when I install xCAT rpm packages on a clean SLES environment and config it as MN, apache service will not be started automatically by xCAT.
Min Jun has found the reason and give a fix
I noticed that Min Jun has integrated the code changes into SVN, the revision number is 6904, please verify the problem in the next build.
This Tracker item was closed automatically by the system. It was
previously set to a Pending status, and the original submitter
did not respond within 28 days (the time period specified by
the administrator of this Tracker).