Juniper CTP Series Routers Alternatives

Cisco® 8000 Series routers complete this journey. They deliver provider-class routing functionality at unmatched density, performance, and power. This enables Cisco 8000 Series to be deployed into an unprecedented range of routing roles – all supported with a single ASIC architecture and operating system – thus streamlining qualification, deployment, and operations. The Cisco 8000 Series combines the revolutionary Cisco Silicon One™, IOS XR® software, and a set of clean sheet chassis to deliver a breakthrough in high-performance routers. The 8000 Series comprises a full range of feature-rich, highly scalable, deep-buffered, on-chip High Bandwidth Memory (HBM) and 400 Gigabit Ethernet (GbE)-optimized routers ranging from 10.8 to 25.6 Tbps in a 1 RU footprint. It is also available in an industry leading, rack-mountable modular system capable of 518.4 Tbps of full-duplex, line rate forwarding.

Our NetVanta 6250 Series is designed to deliver converged voice and data services, including legacy T1 access and Ethernet delivery. It utilizes SIP or MGCP for VoIP applications, providing interoperability with industry-leading soft switches, servers, and gateways. Acting as a gateway, these devices convert IP signaling from the carrier into traditional TDM analog and digital voice services. This functionality enables our NetVanta 6250 Series to simultaneously deliver voice services to IP phones and traditional telephony equipment. All NetVanta 6250 devices support one Gigabit combo port for copper or fiber delivery, four Fast Ethernet ports for both WAN or LAN access, a USB port for wireless backup or storage, and four T1 ports for legacy PBX connections. Additional software upgrades are available to add SBC functionality, VPN and voice quality monitoring (VQM), a graphically intuitive interface displaying captured data for mean opinion score (MOS).

Our NetVanta 3000 Series of fix-port access routers are perfect for carrier-bundled service offerings, and enterprise-class internet access for secure, high-speed corporate connectivity. There are two distinct platforms, the NetVanta 3140 and 3148. The NetVanta 3140 Series supports 100Mbit/s routing performance in a small form factor. The NetVanta 3148 Series supports up to 500Mbit/s routing performance and offers an additional GbE interface, two of which can be fiber-fed. It also features an 8-port Ethernet switch, which can be PoE enabled. Our NetVanta 3140 Series offers two distinct form factors: one is a plastic desktop chassis, while the other is a metal enclosure that can be easily rack mounted. Each device features three routed GbE interfaces and one USB interface for 3G/4G/5G access and supports 100Mbit/s routing performance. VPN and special voice monitoring services can also be added as an optional upgrade.

The Cisco® NCS 560 Series Router delivers a cost-effective, modular solution based on a protocol-independent fabric architecture. The Cisco NCS 560 Series Router, as part of the Cisco Evolved Programmable Network (EPN) architecture, is capable of delivering unbounded scale and unmatched capabilities for Carrier Ethernet business services, over redundant and protected packet-based network technologies (IP/MPLS, MPLS-TE, SR, SR-TE, TI-LFA). The Cisco NCS 560 Series Router Ethernet interface modules are designed to give customers a high degree of flexibility and value. All Ethernet interface modules share a common core that supports time stamping on the module for Y.1731 Operations, Administration, and Maintenance (OAM) delay measurement functions to achieve precise results for one-way and two-way delay measurement. The modules also provide time-stamping functions for the IEEE 1588-2008 protocol.

Our Total Access 900 Series is designed for Ethernet or multi-T1 applications. It includes four T1 interfaces, one Gigabit, two Fast Ethernet interfaces for LAN or WAN facing, and several platforms of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices also offer the ability to add SBC functionality for up to 100 simultaneous calls. Our Total Access 908 offers a single T1 network interface and 8 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213908F1. Our Total Access 916 offers a single T1 network interface and 16 FXS user interfaces for analog voice delivery, an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI), and one Gigabit Ethernet interface for WAN/LAN. Part number 4213916F1. Our Total Access 908 offers a single T1 network interface and 24 FXS user interfaces for analog voice delivery.

Our NetVanta 4000 Series is ideal for carrier bundled service offerings up to 1Gbit/s, and enterprise-class internet access for secure, high-speed corporate connectivity. Several variations add power over Ethernet (PoE) to the built-in switch, VPN and/or special voice monitoring services. All our NetVanta 4000s can also provide eSBC functionality, delivering a truly converged application platform at the customer premises. What’s more, they can grow via software as your VoIP services expand, supporting up to 1000 calls. Our NetVanta 4148 provides four routed, autosensing Gigabit interfaces, two of which can be fiber-fed, and an 8-port Gigabit Ethernet switch. The Gigabit interfaces can be LAN or WAN-facing and are ideal for Ethernet redundancy with immediate failover if one of the links goes down. Part number 17004148F1. Our NetVanta 4148 with enhanced feature pack upgrade adds the ability to support 500 VPN tunnels.

Our fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance. The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports and serial console port. The new version of CCR1036-8G-2S+ has onboard 4GB of RAM, onboard M.2 PCIe 4x slot, full size USB slot and dual PSU for redundancy!

Cisco ASR 1000 Series Aggregation Services Routers provide a Software Defined WAN platform that aggregates multiple WAN connections and network services including encryption and traffic management, and forward them across WAN connections at line speeds from 2.5 to 200 Gbps. The routers contain both hardware and software redundancy in an industry-leading high-availability design. The latest additions to the Cisco ASR 1000 Series are the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router. Both new routers support up to 100 Gbps in a 2-Rack-Unit (2RU) and 60 Gbps in a 1-Rack-Unit (1RU) form factor, respectively. The ASR 1002-HX has 8 built-in 10 Gigabit Ethernet (GE) ports and 8 1 GE ports, with the Ethernet Port Adapter (EPA) slot for expansion. The ASR 1001-HX has 4 built-in 10 GE ports, 8 1 GE ports, and 4 configurable 10 GE or 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 is the newest addition to the modular control plane engines in the Cisco ASR 1000 Series.

For industrial settings where reliability, flexibility and secure systems are critical, Belden’s routers deliver a simplified solution with performance and security in one product. Compliant with IEC 61850, the routers are ideal for large substation installations or similar applications where hardness, performance, security, quality of service and diverse protocols are required. Advanced routing & security, combined capabilities of L3 switching and WAN routing. Expandable & Modular: All gigabit ports with 4-port up to 10-port GbE LAN options in configurable slots. Legacy infrastructure interfacing, support for legacy T1E1 and DDS interfaces, and non-Ethernet communication.

The Nokia 7750 Service Router (SR) portfolio delivers unrivalled performance, scale and versatility for the full array of IP edge and core applications. Communication service providers, cloud, public and private network operators the world over rely on our innovative technology to power their mission-critical networks and services. The Nokia 7750 SR portfolio includes the 7750 SR-s series, 7750 SR series, the 7750 SR-a series, and the 7750 SR-e series. The 7750 SR portfolio offers the scope and flexibility to optimize your IP edge and core applications on a common platform without compromises. Featuring our ground-breaking FP routing silicon and proven Service Router Operating System (SR OS) it addresses a wide range of network functions and services. Scales system capacity up to 432 Tb/s with the flexibility to optimize any network location. Leverages the Nokia FP4 and FP5 network processors to provide deterministic packet forwarding performance at scale.

Designed for security, built for scale. Create a superior network edge with accelerated aggregation services, multicloud networking, and edge intelligence. Enjoy cloud-scale performance with accelerated services that are powered by custom application-specific integrated circuit (ASIC) architecture. Centrally manage your environment with Cisco vManage. Get actionable insights across the internet, cloud, and applications with built-in Cisco vAnalytics and Cisco ThousandEyes solutions. Gain industry-leading multilayered protection—and move to secure access service edge (SASE) with SD-WAN for on-premises and cloud-delivered security. Deliver outstanding service and agile connectivity to users near and far.

Our Total Access 900e Series is designed for Ethernet or multi-T1 converged voice and data applications and offers robust IP router, firewall, and VPN functionality. It also features four T1 interfaces, one Gigabit, two fast Ethernet interfaces for LAN or WAN facing, and several devices of varying user interfaces (up to 24 FXS ports) for analog voice delivery. The devices can also add SBC functionality for up to 100 simultaneous calls. Our Total Access 908e offers 8 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243908F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for WAN or LAN access. Part number 4243916F1. Our Total Access 916e offers 16 FXS ports via an Amphenol connection for analog voice delivery.

CCR1016 is an industrial grade router with a cutting edge 16 core Tilera CPU. If you need many millions of packets per second - Cloud Core Router is your best choice. This model has twelve SFP ports and one SFP+ port for 10G connectivity. It is available in a 1U rackmount case and also has a serial console port, a touchscreen LCD and a USB port. The CCR1016-12S-1S+ comes with redundant power supplies and one RJ45 SFP 10/100/1000M copper module.

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space.

The ASR 900 Series is a modular aggregation platform that delivers cost-effective converged mobile, residential, and business services. You get redundancy, a shallow depth, low power consumption, and high service scale in routers packed with useful features and optimized for small aggregation and remote point-of-presence (POP) applications. Deliver a greatly enhanced broadband customer experience. This series supports broadband aggregation for voice, video, data, and mobility services. It supports thousands of subscribers, and QoS scales to a large number of queues per device. Deployed as a pre-aggregation platform for mobile backhaul, the series can aggregate cell sites and use MPLS as a transport for RAN backhaul traffic. Get the timing services required in today’s converged access networks. The series offers integrated support for a variety of interfaces and can act as the source for network clocking for GPS and other interfaces.

The HPE MSR3000 Router Series feature a modular design that delivers unmatched application services for medium to large branch offices. These routers offer Gigabit switching, provide an enhanced PCI bus, ship with the Comware v7 OS, provide a full-featured resilient routing platform including IPv6 and MPLS, offer up to 13 Mpps forwarding capacity and 14.3 Gb/s of IPSec VPN encrypted throughput to ensure high performance with concurrent services. With the Open Application Platform module, the MSR3000 Router Series offers a wide range of virtualized applications. Its distributed architecture and high reliability also strengthen the resiliency of medium to large branches. The MSR3000 series provides an agile, flexible network infrastructure that enables you to quickly adapt to changing business requirements while delivering integrated concurrent services on a single, easy-to-manage platform.

The Nokia 7950 Extensible Routing System (XRS) is a next-generation routing platform that can help you sustain profitable growth in a highly competitive and constantly changing market. It delivers the scale, efficiency, and versatility you need to address evolving service demands driven by the cloud, 5G, and the Internet of Things. Drawing on our proven silicon, software, and systems integration innovations, the 7950 XRS lets you build a core network with enough headroom to meet capacity demands well into the next decade. On one common platform, you can cost-effectively address your IP routing, internet peering, Multiprotocol Label Switching (MPLS), and infrastructure service requirements. The 7950 XRS has been deployed by telecom, cable, mobile, utility, and private network operators of all sizes. It is also the trusted routing platform of major Web-scale operators and internet exchange providers around the world.

The Cisco® ASR 920 Series Aggregation Services Router (ASR) is a full-featured converged access platform designed for the cost-effective delivery of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN) and Layer 3 VPN (L3VPN) services in a compact package. It also enables service providers to deploy Multiprotocol Label Switching (MPLS)-based VPN services from within the access layer. The Cisco ASR 920 Series offers key Carrier Ethernet features that simplify network operation; you can use them for premium services with enhanced service-level agreements (SLAs). An optional "pay-as-you-grow" feature and service activation model makes the Cisco ASR 920 Series flexible and cost-effective.

Compatible with cellular frequencies around the globe, the OWL 4G family is specifically designed to support next-level security and round-the-clock cellular connectivity across virtually any environment. Its edge computing configuration allows industrial customers to monitor and troubleshoot machines remotely, without going on-site. These features, along with its web interface that enables advanced customization, make the OWL 4G family a flexible solution for many different applications. High-speed wireless connectivity and reliable remote access, with technology specifically designed to enable IIoT or machine-to-machine (M2M) communications. Highly customizable based on application needs, with an intuitive web interface and open Linux platform. Enhanced security functionality, with secure VPN tunneling (OpenVPN and IPsec VPN). Industry 4.0 and Industrial IoT Cellular Router and Gateway. Optimized for 4G applications with edge pre-computing. VPN and programmable extendable Linux.

Dell PowerEdge R series rack servers are enterprise-grade, rack-mountable servers designed for data centers and IT environments, offering high performance, scalability, and flexibility for diverse workloads. These servers, available in 1U, 2U, and other form factors, feature powerful Intel or AMD processors, high-density memory configurations, and storage options including HDDs, SSDs, and NVMe drives. Additionally, they provide expandability via PCIe slots, integrated management tools such as iDRAC, robust security features, and energy-efficient components. Specific features vary between models within the series, which can be deployed for applications like virtualization, high-performance computing, databases, and more.

A robust portfolio of software-defined networking (SDN)-enabled routing platforms, the MX Series provides industry-leading system capacity, density, security, and performance with unparalleled longevity. MX Series routers are the key to digital transformation for service providers, cloud operators, and enterprises in the cloud era. The MX304 Universal Routing Platform delivers massive scale and efficiency for space- and power-constrained environments. It is a carrier-grade, multiservice platform with extensive automation capabilities enabling operators to meet constantly expanding bandwidth, subscriber, and service demands. The MX304 Universal Routing Platform delivers 4.8 Tbps of system capacity in a 2 RU unit and supports 96 x 10 or 25 GbE, 48 x 40, 50, or 100 GbE, or 12 x 400 GbE interfaces in a single chassis. The MX10004, MX10008, and MX10016 Universal Routing Platforms deliver unprecedented scale for service provider and cloud operators.

Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilize this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports and single Ethernet port for management purposes. The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage. Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.

PTX Series Routers form the foundation of the world’s largest core and peering architectures. Powered by the latest generation of Juniper’s custom Express family ASICs, they’re cloud-optimized to enable smooth 400G migrations. They simultaneously deliver the scale, flexibility, and investment protection needed to meet today’s market needs. The routers offer native 400G inline MACsec, flexible filtering, and a reliable network operating system that has been powering generations of high-performance solutions. Discover what 100G and 400G mass scale in the cloud can offer with PTX routing. The modular PTX10004, PTX10008, and PTX10016 Packet Transport Routers directly address the massive bandwidth demands being placed on networks. They bring ultra-high port density, native 400GbE in-line MACsec, and latest-generation ASIC investment to the most demanding WAN and data center architectures.

The Nokia 7705 SAR delivers legacy TDM and advanced IP/MPLS services making it ideal for industries, enterprises and governments and for niche applications in IP anyhaul networks. The 7705 SAR provides an easy migration path from TDM networks. With depth in routing protocols, service scaling, security, and timing, it meets the rigorous demands of mission-critical networks. It is available in multiple compact platforms that reduce equipment footprint and energy costs. These platforms deliver highly available services over a wide variety of network topologies. Strong QoS capabilities deliver customer satisfaction and the ability to differentiate service levels. As a member of the industry-leading Nokia Service Router product portfolio, the 7705 SAR runs the Nokia Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform for high-performance end-to-end application delivery and management.

Enable a variety of WAN connections, including xDSL, Ethernet, 3G/4G LTE, and fiber. The series offers a range of performance levels to meet your needs. Get voice, video, wireless, and data in one integrated router and switch. This desktop form factor is priced affordably for small and midsize businesses. Encryption, VPN, firewall, and URL filtering are all built in. These security features help you protect your customer experience and data. Easily manage the 800 Series with drag-and-click interfaces on your premises or with third-party web-based applications.

The HPE MSR4000 Router Series deliver high-performance large branch routing with up to 36 Mpps in a cost-optimized form factor. Featuring integrated routing, switching, security, VPN, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With the Open Application Platform module, the MSR4000 Router Series offers a wide range of virtualized applications. Its distributed, modular architecture and high reliability also strengthen the resiliency of large branches. Enhances security with built-in IPS and optional HPE IPS filter subscription, as well as a zone-based and stateful firewall. OpenFlow facilitates Software-defined Networking (SDN). WAN optimization and Intelligent Resilient Fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN, and VPLS. Fiber LAN switching and high-density E1/T1 modules. The HPE MSR4000 Router Series simplifies your network through integrated routing, switching, security, voice, etc.

The HPE FlexNetwork MSR1000 Router Series delivers high-performance, small branch routing up to 500 Kpps in a cost-optimized modular form factor. Featuring integrated routing, switching, security, and SIP with no additional licensing, you can boost your service delivery while simplifying the management of your corporate WAN. With Comware v7 and a convenient modular design, the HPE FlexNetwork MSR1000 brings enhanced performance and advanced services, as well as a choice of connectivity options to provide flexible, open standards and lasting investment protection with lower CAPEX and OPEX for small-sized branches. Up to 500 Kpps IP forwarding; converged high-performance routing, switching, security, voice, and mobility. Embedded security features with hardware-based encryption, firewall, network address translation (NAT), and VPNs. Supports OpenFlow that enables integration with mainstream cloud platforms or a third-party controller for flexible network customization.

The HPE HSR6800 Router Series is a family of high-performance, multiservice routers designed for data center interconnection, enterprise WAN core, campus WAN edge, and high-speed WAN aggregation services. It runs the Comware operating system and features an advanced multi-core, distributed service processing hardware architecture that scales up to 420 Mpps forwarding and up to 2 Tbps switching capacity. The router delivers robust routing, multicast, Multiprotocol Label Switching (MPLS), IPv6, security, quality of service, carrier-level high-availability features, and high-density 10GbE and 1GbE interface options. Fully modular Comware v7 network operating system offers improved performance and system availability. Feature enhancements including ADVPN, IRF2, EVI, EAA, and ISSU. FIP-240 doubles FIP-210 forwarding performance, up to 4 HIM/MIM slots. Line cards offer 1GbE combo/10bGE ports, and increased IPsec performance. RT-HIM-2EXP doubles HIM 10GbE port density and supports SFP+.

It supports robust cybersecurity, Cisco Edge Intelligence, 5G, SD-WAN, and more. Speed and scale are pillars of the IR8300 - it's the first Catalyst to integrate Cisco QuantumFlow and Unified Access Data Plane Technologies. The IR8300 is an integrated routing and switching platform. It's easily upgradeable with modules for public and private 4G LTE, 5G, and more. Get enterprise-grade security and network policies to connect reliably and securely, using Cisco vManage for SD-WAN. Use the platform’s built-in Cisco IOx edge compute to build and run your own applications at the edge. Synchronize network resources that host highly time-sensitive applications. The IR8300 meets substation compliance standards, including IEEE 1613 and IEC 61850-3.

Transform your network and scale beyond the physical infrastructure by virtualizing your CCAP with the Cisco Cloud Native Broadband Router. Built from the ground as a cloud native application composed of containerized microservices using open-source tools, the Cisco Cloud Native Broadband Router delivers nonpareil scalability, elasticity, and resilience. Designed and coded from the ground up as a composition of multiple services for elasticity, resiliency, and composability. Based on open, modular, standards-based software, including Kurbernetes and Docker, for rapid and agile development and deployment. Change the way you operate your network with real time monitoring, analysis, and remediation. Take advantage of web-scale operations with auto-provisioning, auto-scaling, and auto-redundancy. Written for the cloud as software independent of hardware. Compatible with bare metal and designed to be portable across multi-cloud environments.

The Network Convergence System 5000 Series is designed to economically scale large enterprise, over-the-top (OTT), and service provider data center networking architectures. The 5000 Series routers offers 960-Gbps throughput with 1.4 Bpps. They also have a small footprint, and consume less power. Get a dense, programmable solution that supports application hosting, machine-to-machine (M2M) interfacing, telemetry, and flexible package delivery for software feature enhancements. Cisco nV technology dramatically reduces operational costs and simplifies the network through the use of the Cisco ASR 9000 Series distributed control plane.

The NCS 500 Series offers a secure and highly available access-routing platform for service providers. Both fixed and modular form factors support advanced automation and programmability to provide 5G, Remote PHY, Carrier Ethernet, and FTTx. The NCS 540 and NCS 560 are built for 5G with advanced timing, ultra-low latency, and ultra-high capacity. They provide the foundation for pervasive Mobile Broadband (MBB), massive IoT, tactile Internet, smart cities, and AR/VR. Build application-aware networks with segment routing, open and programmable interfaces using NETCONF and YANG data models and APIs, and real-time visibility with streaming telemetry. Intelligently converge network services onto a single platform with the highly scalable and energy efficient NCS 500 Series. Flexibly scale capacity with ports that support 1/10/25/40/100 GbE.

The 7210 SAS product family provides the deployment flexibility, service richness and reliability you need to extend segment routing, IP/MPLS, and Carrier Ethernet to the access points of your network. With a wide variety of platforms, it is used for business VPN, residential broadband, demarcation, and mobile backhaul, and is also widely used in industry, public sector, and enterprise applications. Ready your network for future growth with high-density GE and 10GE interfaces, 100 GE uplinks, and up to 2 Tb/s throughput. Offer competitive services based on high availability and quality of service. As a member of the industry-leading Nokia Service Router product portfolio, the 7210 SAS runs the Service Router Operating System (SR OS) and is managed by the Nokia Network Services Platform (NSP) for high-performance, end-to-end service delivery and management and carrier-SDN integration. 7210 SAS supports differentiated services, including Carrier Ethernet, IP VPN, and enhanced services.

The Nokia Virtualized Service Router (VSR) is a highly flexible virtualized IP edge router designed and optimized for telco cloud environments. It enables rapid service innovation while lowering operating costs. With the VSR, service providers can extend service reach, open new markets, and accelerate time to market. The VSR supports a broad and rich set of virtualized IP edge applications, and virtualized network functions (VNFs) to support mobile, business, and residential services. Based on the Service Routing Operating System (SR OS), the VSR delivers high performance and elastic scalability for x86 server environments. The VSR supports the highest levels of reliability and resiliency. It also offers flexible management options – from working with open frameworks to delivering OpenStack®-integrated VNF management and element management capabilities with our 5620 Service Aware Manager (SAM).

The Cisco 2010 Connected Grid Router, the first in the Cisco 2000 Series, is an ideal platform to support the communications requirements of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This product has been extensively tested and is KEMA-certified to meet challenging substation compliance standards, including IEEE 1613 and IEC 61850-3. Cisco IOS Software delivers the benefits of integrated security for NERC/CIP compliance, quality of service, and network management to help ensure integrity and priority of operational data communications. Rugged industrial design and substation compliance with IEC-61850-3 and IEEE 1613 for utility substation environments. Support for a series of WAN connectivity options using Grid Router WAN Interface Cards (GRWICs).

Huawei NetEngine 8000 series routers provide an all-service, intelligent router platform designed for the cloud era. Using ultra-broadband pipes to construct simplified networks, and Segment Routing (SR) and Segment Routing over IPv6 (SRv6) protocols to establish intelligent connections, NetEngine 8000 combines with Huawei's next-generation Network Cloud Engine (NCE) to implement full-lifecycle automation and proactive Operations and Maintenance (O&M). An intent-driven approach frees customers from unnecessary constraints, unleashing network potential. Available in a range of form factors and applicable to core, aggregation, and access networks, the award-winning NetEngine 8000 offers high performance and reliability, with low power consumption and full evolution capabilities. Applications include functioning as a core node for an enterprise Wide Area Network (WAN), as an access node on a large enterprise network, as a Data Center Interconnect (DCI) node.

The Session Smart™ Router powers Juniper’s SD-WAN solution that’s designed to connect users with exceptional experiences. Built on an application-aware and zero-trust secure network fabric, it meets the most stringent enterprise performance, security, and availability requirements. The router overcomes inherent inefficiencies of conventional solutions with a tunnel-free architecture that enables improved performance, fast deployments, and cost savings. The software solution can run on customer premises equipment (CPE), on data center network servers, and in the cloud for flexible deployments. It is centrally manageable using the AI-driven Juniper Mist™ cloud or the Juniper Session Smart Conductor platform. Application-aware routing, fail-safe service delivery, orchestration and automation, zero trust security, and centralized management using the Juniper Mist Cloud or Session Smart Conductor.

The Cisco CGR1000 provides hardened security designed at different layers. Certificate based identity check ensures the physical device is eligible for the network. The 802.1x Access control guards the entry points into your network. IPSec and FlexVPN provide transport layer enterprise level security. The CGR1000 serves as a horizontal platform for various industrial services, enabling Automated Metering and Distributed Automation for the utility industry. On top of it, It also provides services for street lighting applications and substation automation using data from intelligent electronic devices (IED). By providing features such as VLAN, VRF-Lite, QoS, the CGR1000 provides true multi-services to IoT industries.

The Network Convergence System (NCS) 6000 helps enable superior network agility, packet optical convergence, and petabits-per-second system scale. It facilitates the Cisco Evolved Programmable Network to support virtualization and programmability at low total cost of ownership and delivers high-bandwidth mobile, video, and cloud services to end users. Innovations include Cisco nPower X1 NPUs, hardware-enabled true zero-packet, zero-topology loss ISSU, capability to scale beyond 1 petabit in a multi-chassis configuration, enhanced operations support, and packet-optical integration. Use an adaptable power consumption model for both the ASIC and CMOS photonics technology for the lowest carbon footprint in service provider routing today. Easily adapt each line card's power consumption to the number of ports used.

1U rackmount, 10xGigabit Ethernet, SFP, USB 3.0, LCD, PoE out on port 10, 2x1.4GHz CPU, 1GB RAM, RouterOS L5. The RB3011 is a new multi-port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full-size USB 3.0 port, for adding storage or an external 3G/4G modem. RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port. The device has an operating system preinstalled and licensed. No separate purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from the date of purchase.

Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128). Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). Two models are available, with the RB1100AHx4 Dude edition featuring several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage-intensive feature. The Dude edition includes a 60 GB M.2 drive already installed.

New RB1100AHx4 Dude Edition has Annapurna Alpine AL21400 CPU with four Cortex A15 cores clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbps. The device supports IPsec hardware acceleration and is faster at it than any previous RouterBOARD device (up to 2.2Gbps with AES128). Unit comes with 1U rackmount case, 13x Gigabit Ethernet ports, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support). The RB1100AHx4 Dude edition features several high speed storage connectors (two SATA and two M.2) for using a Dude database, proxy cache or any other storage intensive feature. It includes a 60GB M.2 drive already installed.

Like the other models in CCR2004 series, this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1,7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.But that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the CCR devices. Better for the planet, better for the bills, it’s a win-win! The new router has 18 wired ports, including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel. Like all CCR devices, it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included, so you have one less thing to worry about. And, of course, there is active cooling to keep things nice and cool.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, USB, LCD, PoE out on port 10, 600MHz CPU, 128MB RAM, RouterOS L5. The RB2011 is a low-cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring - are just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five fast Ethernet LAN ports, but also has RJ45 serial port, USB port, and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and a nice touchscreen LCD for configuration. SFP cage is also present.

1U rackmount, 5xEthernet, 5xGigabit Ethernet, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. The RB2011 is a low cost multi port device series. Designed for indoor use, and is available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system that has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration, and monitoring are just a few of the vast number of features supported by RouterOS. The RB2011iL-RM includes a new feature, a power injector on Ethernet port 10, it can power other PoE-capable devices with the same voltage as applied to the unit. Fewer power adapters and cables to worry about! The maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports.

All-in-one rackmount platform for cloud data centers. Compact 2U system that supports up to two double-width GPUs in a 25.5" chassis. 4-12 SATA/SAS drive bays with optional full NVMe support in select SKUs. 2 or 4 PCI-E x16 slots and dual AIOM (OCP 3.0 superset) slots for maximum data throughput. The secure root of trust, total memory encryption, and software guard extension. Toolless design for rapid deployment and easy maintenance. Up to 16 DIMM Slots, up to 4TB DDR5-4800 memory, and support for Intel® Optane™ persistent memory. Single/Dual 4th Gen Intel® Xeon® Scalable processors up to 350W TDP or Single AMD EPYC™ 9004 series processor up to 400W TDP. Up to 12 3.5" hot-swap NVMe/SATA/SAS drive bays; Optional RAID support via RAID AOC. Redundant 860W/1200W Titanium level (96%). Optimized for cloud data centers, our H12 CloudDC servers provide next-generation technology that can help you deliver cost-optimized services in an increasingly competitive economy.

A versatile 100 Gigabit switch that offers speed, value, and diverse connectivity options. 2x 100 Gigabit QSFP28 ports, 8x 25 Gigabit SFP28 ports, dual hot-swap power supplies. Remember our sensational 100 Gigabit switches, the CRS504 and CRS518? It’s time for another breathtaking addition to the MikroTik 100 Gigabit product family, the versatile CRS510-8XS-2XQ-IN! This handy switch has two 100 Gigabit QSFP28 ports and eight 25 Gigabit SFP28 ports. This combination of ports guarantees a perfect fit in almost any setup or server room. Various direct attach cables, active optical cables, copper RJ45’s, CRS510 will keep everything connected! You’ll save time, money, and precious nerve cells with backward compatibility. This unit supports all sorts of devices, 40 Gigabit, 25 Gigabit, 10 Gigabit, and even older Gigabit connections. And speaking of nerve cells, we’ve kept the sysadmin’s emergency tool, the good old console port.

This version of the RB5009 has all the bells and whistles of the previous model: Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added PoE-in & PoE-out on all eight Ethernet ports. Combined with the 2-pin connector and the DC jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. RB5009UPr+S+IN takes it one step above that! All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages. If you’re using PoE-out to power other devices, the board will choose the source with the highest voltage (DC jack or the 2-pin connector) to power those.

Start your 100 Gigabit journey with our new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072. But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines! There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. And these PSUs might look familiar if you have used our CCR1072 before: you can keep using your previous hot-swap power supplies and SFP modules.

Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router. By default, the PCIe interface will show up as four virtual Ethernet interfaces. Two interfaces in passthrough mode to the 25G SFP28 cages. Remaining two virtual Ethernet-PCIe interfaces are bridged with the Gigabit Ethernet port for management access. The user can configure all interfaces and settings freely since we are running fully functional RouterOS here. To get this CCR device to work as an NIC, a new Passthrough mode was implemented. Basically, a FastForward FastPath mode that can also pass hardware link statuses. This NIC can reach wire-speed (100Gbps) with Jumbo frames. It ensures that in most server setups this CCR network card will not be the bottleneck.